Cool videos mate, you just got another subscriber! One comment though to this video in particular - you should tighten the top nut of the shock AFTER the car sits on the ground. There is a risk that now it may not be tighten properly.
Best tutorial I've seen so far. I noticed that you said that the suspension springs should be replaced in pairs, can I ask, did you replace both in yours?
You've made this look pretty straight forward and we'll explained. Is this the same process on a Renault wind? Also what is the metal wire called that you use to hold the parts in place to avoid damage? Also how do you know how much compression is needed on the spring? Thank you and keep up the great videos.
Hi :) Renault Wind is more like Renault Twingo, and it might have small differences compering to Clio. especially under windshield cowl. But suspension will be pretty the same. Similar construction. You have to compress the springs until you feel that they have no tension on shock absorber. That's the only way. Ohh and the wire, it's just copper wire nothing special ;)
Would be a simple job if sway bar and strut head didnt have an Allen key slot made out of toffee, despite penetrating oil and wire brushing both gave up well before the retaining nuts left the thread.Beware.
I need to do my Clio 3 also and I've been looking online at the coil springs. I can see some are different lengths for the clio 3. How do you know which ones to choose ?
@@MrDookie2011 hi mate, arent the springs colour coded with specific coloured dots indicating which model they fit, like on mine they are blue and orange dots indicating they are for a 197 cup. 👍👍. auto doc are good for parts have you tried them?
![How to change front springs RENAULT CLIO 3 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/XN4RxN_ECgY/mqdefault.jpg)
![How to change front springs RENAULT CLIO 3 [TUTORIAL AUTODOC]](/img/tr.png)
![How to change a front shock strut on RENAULT CLIO 3 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/c1Pz8R5cMrc/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
![How to change front control arm on RENAULT CLIO 3 [TUTORIAL AUTODOC]](/img/n.gif)
I like the way this guy works👍
Cool videos mate, you just got another subscriber! One comment though to this video in particular - you should tighten the top nut of the shock AFTER the car sits on the ground. There is a risk that now it may not be tighten properly.
Best tutorial I've seen so far. I noticed that you said that the suspension springs should be replaced in pairs, can I ask, did you replace both in yours?
Thanks for that :) I'm glad that you like it. Yes I replaced two springs. I didn't show it on video because job on both sides is the same :)
Fantastic video - Thanks mate !!!
Cool video mate well explained 👏👍👌
You've made this look pretty straight forward and we'll explained. Is this the same process on a Renault wind? Also what is the metal wire called that you use to hold the parts in place to avoid damage? Also how do you know how much compression is needed on the spring? Thank you and keep up the great videos.
Hi :) Renault Wind is more like Renault Twingo, and it might have small differences compering to Clio. especially under windshield cowl. But suspension will be pretty the same. Similar construction. You have to compress the springs until you feel that they have no tension on shock absorber. That's the only way. Ohh and the wire, it's just copper wire nothing special ;)
Thank you for taking the time to reply. I really appreciate it 🙂
is there is a difference in spring where is up or down? could it be use upside down? a have a new one and there are any marks
Would be a simple job if sway bar and strut head didnt have an Allen key slot made out of toffee, despite penetrating oil and wire brushing both gave up well before the retaining nuts left the thread.Beware.
Hi there, Unfortunately as you said, sometimes this job can be real pain.
Regards :)
I need to do my Clio 3 also and I've been looking online at the coil springs. I can see some are different lengths for the clio 3. How do you know which ones to choose ?
Hi mate, look on RPD (renault parts direct) if in the uk 👍👍 it should help you pick the correct parts 👍👍
@@ravenmaster6364 Some are 341mm and others 351mm do you measure the old ones?
with 341, the top mount bearing is too tight, 351 is ok - is there a easier way of telling ?
@@MrDookie2011 hi mate, arent the springs colour coded with specific coloured dots indicating which model they fit, like on mine they are blue and orange dots indicating they are for a 197 cup. 👍👍. auto doc are good for parts have you tried them?
This Clio looks familiar 🤔
😋 😉