Injora 2-stage foam test ( I like these )
ฝัง
- เผยแพร่เมื่อ 18 ก.พ. 2021
- I like these foams! They seem to be soft enough to work yet not too stiff to bounce off stuff. Links below for these foams and more parts and pieces of this vehicle. Use them to support Exocaged RC, Thanks
Injora Foams
Amazon amzn.to/3ubpwWq
Ebay ebay.us/uO8yJQ
Reefs Fury Beadlock Wheels
Here they are at Reefs RC www.reefsrc.com/shop/p_220574...
RPP Hobby Fury www.rpphobby.com/product_p/re...
RPP Hobby Hammer www.rpphobby.com/product_p/re...
Hobby Recreation Products
www.hobbyrecreationproducts.c...
Jconcepts Landmines
Amain bit.ly/3jV1hWa
Amazon amzn.to/3ucgPLu
Axial SCX10iii JLU
Amain bit.ly/3fxlcdh
Ebay ebay.us/iZ6rsk
Horizon www.anrdoezrs.net/links/10031...
Axial SCX10iii Gladiator
Amain bit.ly/3qxMdlc
Ebay ebay.us/i5h51J
Horizon www.anrdoezrs.net/links/10031...
Hobbywing 1080 ESC
Amain bit.ly/3pyDVZc
Amazon amzn.to/3axs3lM - บันเทิง
I was literally just looking at these hoping some one would make a video.
You should try a set of hair buns, for the heck of it, I've been LOVING mine
Extra flex on the Exo-plex. Awesome review Exocaged RC. I will be buying a set of these foams for sure.
Every time I think I have the tire/foam combo I want, you show us something new/different. Sigh... lol. Love these types of videos, not as much as tire comparison videos, but still good. Thanks Joe!
Thank you for doing this video. I've been wondering about the injora foams. Great info.
I'm going to keep saying it, I absolutely love my ottsix halos... they give such a nice sidewall and keep the tire on strait unlike my prolines which have flat sidewalls and slop over when sidehilling
Those fold over just like the real deal. Very cool.
ive recently purchased these and honestly I kept the rubber ring, used my stock proline foams on a set of proline flat iron xls (x6) on my brass'd out trx6, and without glue the foams stay in place, they seemed to naturally stretch over the injora rings perfectly! 4 full runs approved
Super cool appreciate the video. I’ll be watching more
.... and just when I needed new foams! Letssss gooooo!!
Great video and test , thanks for sharing
Nice thorough review.
It's amazing how stuff changes, being out of crawling for 3 months!
What do you mean you just changed your name to plane and you have been commenting on like every crawling video by exocaged rc
so glad you tested these foams! i hesitated to buy them on amazon because they had no reviews. Thanks bro 👍
are you running the 110mm foam in 4.7" tires?
would you recommend them on a crawler under 7lbs?
I like your course that's pretty sick.
The stock foams killed ya on the nasty. Think if u ran the new foams on all 4 tires u would have better all around performance. 🤷♂️ idk, just what I saw. I actually kinda liked the injora foams🤔😁👍
You are a skilled crawler my friend..
I have a set of these, they are perfect for my nitto trail grapplers, the narrow tyre prevents that odd lateral movement.
Maybe glueing the foams together?
"There's a plane overhead" you said that as a plane was flying over MY HEAD and slightly creeped me out haha!
BAHAHAHA!!!! Thats awesome!!
Thanks mate, just order one
They look good im currently running hair donuts as foams in my wraith and they seem to be awesome and only cost £4
Good info! Just don't forget they are still new.I'd like to see an update when you put some mileage on them.
I agree on the mileage update. I would like to see how they hold up but also how the e6000 too
I've had these on my rig for a bit over a month, running the rig almost daily, and so far so good! I DON'T like the foam shift though. The outer foam is super slippery on the inner foam and tire wobble is horrendous almost all the time. That's my only gripe. I may super glue them.....idk yet.
To add to my comment, they've softened up a bit....clearly not the inner part haha! Now I haven't torn my tires apart since installing them so IDK if they're degrading or just maturing, and I've added about a pound and a half to the rig since first run BUT they are a little more squishy than they were fresh and have some good contouring going on. They DO get a bit stiffer in snow runs I've noticed. Not so much so that they lose anything, but visibly stiffer (could be freezing water in them? Who knows haha!) The added weight is awesome though. For grip, and suspension articulation! I'm excited to see what they do in my area's humid 100 degree August weather....maybe that inner will soften up too 🤷♂️🤣
I have been running them for a few months...the outer foam turned into DUST over time.
👍,, all the way through.. like the end.. really enjoyed this nice footage.. 😎👊
Good review. Also much cheaper than other options on the market
I just put in the new black heavy weight inner foams from crawler innovations. I am sold. I used the 4 inch inner and a soft outer. Both in 1.5 inch. For the 4.7 landmines. I get a 1/4 inch of squash and the it stops. So it’s sidehill city. I use hair bun xl’s in my trail crawler that sees a lot of water.
Good morning. Neat.
I think it was MIP that does or did make a tape for the foam inserts. Racers used it to keep tires and foams from ballooning up during racing. Maybe use the tape to keep the foam from shifting on that insert to much. Just a thought.
You can trim the web on the Halo to reduce the sidewall bulge. I usually take 5mm off one side to start.
Just finished the video , definitely put those foams all the way around
I've been wondering about these foams. I currently just use the dual stage pro line and single stage pitbull foams. They work ok but could be better. Especially if you can add 70+ grams per wheel!
I'm going to give these a try, but I wonder if the truck would preform better if you glued the pieces together so they couldn't slide out of place in the tire?
Gosh dammit and I was really rootin for em. I can’t wait to get me a set of those wheels. I almost forgot about them. Thanks
What do I think?? I think them Reef’s wheels belong on the 10.3. She’s gorgeous
What if you glued the foams to the center piece, I guess I can’t call it a center foam
Well sorry Joe, I mentioned gluing them before I the end. It’s gonna work
Interested to find out if that did fix the side movement. Sure might help keep the tire true when side hilling. Good video.
I will find out this weekend at the USTE. I hope they hold center.
It looks like they have a red version of these and a "softer" version of them that are blue. I would like to see a review that compares the differences between them. The website and reviews don't really say much that's meaningful. Great video. Thanks!!!!
Great vid Joe. Question. I noticed a hole in the side wall of the Landmines. Do you vent the side walls? Or is that standard on Landmine tires? Any adventage over venting between the tread of the tire?
yeah I vent the tires because either the wheels are sealed or the solid inner foams seal up the holes.
Maybe some, like, double sided gorilla tape between the foam outer and rubber inner? I love these on my rig, until they shift. They always shift at the worst time 🤣🤦♂️ I've had them about a month and haven't done anything to stop wobble/shifting yet. I need new rims, then when I rip everything apart to swap rims I'll try something....time will tell!
You should try the Sweep Racing dual stage foams. I have them in my Capra and I like them.
havent seen them yet
@@ExocagedRC My local hobby shop had them and everyone I ask likes them as well. They are pretty cheap too. I do like the way your Injora performed so I may have to try them . Can never have enough foams right?
I always went with a slightly stiffer foam in the rear to keep the front down while climbing. Interesting you're the exact opposite lol. Seems like with softer foams in the rear it would be more prone to lifting. I'm gonna have to pick up a set of these cheap foams. Give them a try
A bead of tape around the inner wheel will help the foam grip and keep from sliding around on the wheel so much.
How are the foams after a bit of runtime? I have same set of foams and chyrax laying around, but i dont wanna waste time mounting them if the foams are like dust after 10 hours :D
I have to say crawling is fun. Technical spots require a lot of concentration.
Have you try to mount those injora foams on your klrm tires?
Have you ever tried hair donuts?
Can any help me out..gota 10iii gladiator nd same as joes as far as clicking goes..been through whole driveline nd it still clicks..im thinkn about puttn the old reliable 3 gear trani in there i see bowhouse makes the adapter plate for it..i just need to know if itll still crawl or be geared to high..any comments are appreciated 🖒🖒
could you just glue the red rubber to the foam? or can you not get the wheel together if it is glued
Wouldn't changing the combo be better?? Stiff out back soft up front?
That is a general recommendation. It can help with climbs. But you know, every truck and preference is different.
Just an idea, how does double sided tape work for the foams from sliding around?
That or some e6000
After watching this, I just converted a set of Duratrax Showdowns with the Injora two-stage in the front and the OEM single stage Duratrax foams in the rear... and it's fantastic. The stock foams were BAD at anything sidehill, and the Injora in all four corners were too stiff, even with my rig at 10+ pounds. The mixed setup is PERFECT. I need to convert another set of wheels with the other pair of Injoras, but aren't looking forward to taking all those screws out again.
I would like a tire foam that was made out of almost liquid rubber. like if you took a silicone breast implant and made it tire shaped
Boom Racing makes some silicone ones, but I think only in 4.19? I can't recall the specifics.
did you use 100 mm or 110 mm
The ad says there are 4.33" and the tires are 4.75" How does that work
Well that was you're fifteen minutes of foam... : )
The best is Crazy Crawler. And the absolut best is A.L.T. Foams (Germany)
it depens, I like proline dual stage a bit more for crawling
I like the crazy crawler foams, but not all the time. It definitely depends on what rig you drive and the weight it has. Plus personal preferences
How would you compare them to the proline dual foams?
Well, different. The prolines seem to put more sidewall out and these keep them narrow. Overall both are great options
@@ExocagedRC sweet thanks that's what ii was hoping. I'm ordering mine today. Maybe might just change the front and keep the rears proline. Thanks for all the videos and info keep 'em coming. Maybe a more detailed video on the RC6GS and programming those 2 grip buttons lol
whats the reason for venting tires at the sidewall? I feel like this would trap water more versus venting in the treads.
Axial needs better flexibility to get over that hill, without falling over, this truck is still trying, hopefully 🤔 if it get better soon, nice video challenge.😎👍🏗️🤠💪
Hey he likes them. And he's leaving them in the front and stock in the rear. Just incase you didn't hear it the first 20 times
Do you have any long term use comment about these?
Use them a few times. Not a whole lot but so far so good
Can you please do a hair bun review
Too bad I had hopes for these. I suppose it d they were taped together with double sided tape they may perform better
Soft foam in front alows an awesome hook while a firm rear foam will not wrap up and throw you back
Can you try out the Power HD S50 and do a little bit of a review please?
Im thinking about getting one for my capra and a review would be great
@@mojaverc1585 recently bought one for my TRX-4. Haven't installed it yet as I'll be getting a 8.4V 10A BEC for it.
@@S9RUT would it be able to run on a stock 7.4v bec?
@@mojaverc1585 if its from a Hobbywing 1080 or something similar, the BEC's in those only provide 3A, which is kind of low. I email Power HD and they recommended at least 5A when operating at 8.4V.
@@S9RUT Im using a hobbywing axe so it should be better
First again! 👍😁
Except for the people that watched it yesterday
@@alexchapman5872
Yup. I'm not a patreon.
LOL yeah, the Channel Members usually get first viewing.
I work to many odd hours to try to pay to see a video early. Just got lucky this time.
But I crawl a completely different style , smaller tires and smoother rock
Who is this young boy in this Video?
LoL I have no idea!
Two words. Facial hair. You need to grow it back. Otherwise good videos :)