Yes we do recommend using a tool to grease your bearings. Tusk wheel bearing greaser is the perfect tool: www.rockymountainatvmc.com/parts/tusk-wheel-bearing-greaser-p
The coned washers for the spindle were taken off with the domed side toward the bearing at 4:23 but puts them back on with the dome side out at 14:07. Which is correct?
Thanks guys, that was a real world way of doing the job at home.
Best how to video on this subject. I've watched a few to prepare for this job. Thanks.
wondering if you recommend or against using the bearing grease tool to add grease inside the bearing?
Yes we do recommend using a tool to grease your bearings. Tusk wheel bearing greaser is the perfect tool: www.rockymountainatvmc.com/parts/tusk-wheel-bearing-greaser-p
Are the snap rings specific to the machine or universal?
The coned washers for the spindle were taken off with the domed side toward the bearing at 4:23 but puts them back on with the dome side out at 14:07. Which is correct?
Rzr Service Manual says " Install rear wheel hub assembly, cone washers and hand tighten the castle nut. Install washers domed side out."
Is packing that bearing with grease a bad idea?
I'm wondering the same thing.
what size bearing driver?
They come as a set. So, just pick the one that fits best.