So delightful! I enjoyed today’s playful banter between you and “Baby”. 😂 I am new to heat press (only had my heat press machine a couple of weeks). Watching your tutorials has been so helpful and given me confidence. Thank you for what you do.
Great video again Martin!👍🏾👍🏾👍🏾 You folks are inspiring. Proved again this business can be done by anyone!👍🏾After weeding do you have some kind of protective sheet to protect the vinyl sticky side from dust?
Love the videos Martin, I've been doing tshirts a few months now too after seeing your videos, I wish I knew how you made enough money though for both of you. everybody nowadays seem to tell me they can get personalised tshirts etc from Ebay or Vistaprint cheaper than what I can do them for. I'm going to keep it up though as I still have a full time job too.
Martin, a lot of Cameo users now use CB09 Graphtec cutting blades. No need to buy the holder every time, just the blades. check them out on Ebay. Cheers.
Thanks Martin for another great and comical video. I too have had no success with the Forever products and have wasted a lot of money and time on it. Go the vinyl!
You should put them under the heat press when you to heat the adhesive part and it will come off easier just fyi. Normally when I do it I heat up the press silicone for maybe 2 seconds then I lay the HTV that's is already Cut and then peel its faster.
Hi Martin, I have ordered your video to look at starting a business in my local area. I have a heat printer which came with all the accessories. It’s not a branded one that I bought from Amazon. I wanted to know where you buy your supply of HTV from please. I am also in the process of buying a printer. I have looked at you TH-cam video on your T-shirt printer and wanted to ask if you use it for the mugs or is it a different printer altogether. I ‘d like some advice on sublimation paper and ink. I see that you have attached an external ink pack to your printer. I’m hoping you DVD will explain fully what I need to buy as I need to keep my costs down. I also need to start selling but I’m unsure of how to price and market my goods. How did you decide on a name for your business. I was medically retired from my job 18 mths ago and therefore need to start some income coming in. I was be grateful for any advice to get me started. Thanks Anjee
HI Anjee, I think it's better to answer your questions once you have watched the dvd. Email me your questions after and i'll answer them. Regards Martin
Hi Martin, love your videos always always learning from your videos, I have a question what type of Gildan t-shirt you will recommend? Here in USA Texas store only sell heavy cot ton and don't like that.Thank you.
HI martin please which types of blanks do you use, i realized you have Gildan boxes in the videos but will like to know which collection of Gildan do you normally use
Martin, Can you let me know what settings you use on your Cameo for Blade , Speed and Pressure please? I'm having issues with the vinyl not peeling away clearly. Thanks
Hi martin i'm in Ghana and will like to have a copy of your DVD but i don't have a paypal account, is there another way i can make payment to get a copy of the DVD.
So delightful! I enjoyed today’s playful banter between you and “Baby”. 😂
I am new to heat press (only had my heat press machine a couple of weeks). Watching your tutorials has been so helpful and given me confidence. Thank you for what you do.
Hey Melody, thanks for watching and glad you get something from the vids.
Cheers
Martin
great video. more videos like this would be great martin
Fantastic video Martin. Brings a smile. Keep them coming! Cheers.
Great video again Martin!👍🏾👍🏾👍🏾 You folks are inspiring. Proved again this business can be done by anyone!👍🏾After weeding do you have some kind of protective sheet to protect the vinyl sticky side from dust?
I always make sure the work surface is clean from dust Bryan.
Love the videos Martin, I've been doing tshirts a few months now too after seeing your videos, I wish I knew how you made enough money though for both of you. everybody nowadays seem to tell me they can get personalised tshirts etc from Ebay or Vistaprint cheaper than what I can do them for. I'm going to keep it up though as I still have a full time job too.
Martin, a lot of Cameo users now use CB09 Graphtec cutting blades. No need to buy the holder every time, just the blades. check them out on Ebay. Cheers.
Great tip Charlie.
Thanks
Martin
Seriously though I worked out the numbers and once you got the kit up and running the profits are immense
Thanks Martin for another great and comical video. I too have had no success with the Forever products and have wasted a lot of money and time on it. Go the vinyl!
Seems a common theme. with this product. I've had loads of feedback of people saying the same.
Cheers
Martin
You should put them under the heat press when you to heat the adhesive part and it will come off easier just fyi. Normally when I do it I heat up the press silicone for maybe 2 seconds then I lay the HTV that's is already Cut and then peel its faster.
Yes, I know about that. Thanks for reminding me.
Cheers
Martin
Great video Martin , thanks for all the information you give out . 👍🏻
Glad you enjoy the videos bud.
Cheers
Martin
Awesome video man keep it up!!
Love this family video.
Hi Martin,
I have ordered your video to look at starting a business in my local area.
I have a heat printer which came with all the accessories. It’s not a branded one that I bought from Amazon.
I wanted to know where you buy your supply of HTV from please. I am also in the process of buying a printer. I have looked at you TH-cam video on your T-shirt printer and wanted to ask if you use it for the mugs or is it a different printer altogether.
I ‘d like some advice on sublimation paper and ink. I see that you have attached an external ink pack to your printer.
I’m hoping you DVD will explain fully what I need to buy as I need to keep my costs down. I also need to start selling but I’m unsure of how to price and market my goods.
How did you decide on a name for your business.
I was medically retired from my job 18 mths ago and therefore need to start some income coming in.
I was be grateful for any advice to get me started.
Thanks
Anjee
HI Anjee, I think it's better to answer your questions once you have watched the dvd. Email me your questions after and i'll answer them.
Regards
Martin
Hi Martin, love your videos always always learning from your videos, I have a question what type of Gildan t-shirt you will recommend? Here in USA Texas store only sell heavy cot ton and don't like that.Thank you.
We use Gildan G5000 t shirts. Not sure if you get them over there.
Martin Butler, thank you so much for the information.
Love your videos so much Martin. Thanks for your sharing.
Kiet
thanks bud. Glad you enjoy the vids.
Cheers
Martin
Hi Martin, the top of the blade screws off..sometimes vinyl can get stuck in there...
I've never had that problem but thanks for the info.
Love the videos Martin ,wear can i get the powder used to print on cotton fabric using the sublimation paper?thanks bobby.
That powder is not good Bobby as it fades after washing. I did a video on this.
Cheers
Martin
Very comical video martin 😂😂😂 don't mock Sharon's weeding ! 😂😉 good video as usual bout time another cooking video init ? 😉👍
Haha, yes, we should be doing some cooking vids soon Pauly.
Cheers
Martin
HI martin please which types of blanks do you use, i realized you have Gildan boxes in the videos but will like to know which collection of Gildan do you normally use
We use G5000 t shirts.
Cheers
Martin
thanks for the info
Great vid Martin
Cheers
Jamie
Do you get your tshirts directly from Gildan? Also, when buyin tshirts how many of each size do you buy as standard in one job lot?
No we have a clothing supplier. We normally hold a stock of 10 each of each size from small to xxl in black and white.
Hi Sharon, Martin & family.
Hi Martin I Love Your Videos Buddy, Where do You Order Your T-shirts and Hoodies?
From a company called Absolute Apparel here in the UK.
Love it! Banter and fun
Martin, Can you let me know what settings you use on your Cameo for Blade , Speed and Pressure please? I'm having issues with the vinyl not peeling away clearly. Thanks
We use cutter indicator on 2 in the software but 4 on the click blade, Speed 8 and force 7
Cheers
Martin
Thanks Martin.
God bless, lovely family you got.
What a great video, very entertaining, thanks.
Just tried to show a bit of reality in working from home.
Cheers
Martin
thanks Martin.
great videos, thank you
Where do you purchase your bags?
We get them from Ebay, 10"x14" clear t shirt bags.
Cheers
Martin
Hi martin i'm in Ghana and will like to have a copy of your DVD but i don't have a paypal account, is there another way i can make payment to get a copy of the DVD.
We don't ship to Ghana but you can get the online version at www.udemy.com/how-to-start-a-t-shirt-transfer-printing-business-from-home/
Hello, can I purchase the training DVD from America?
Hi Colt, Yes you can bud at ukinternetmarketingschool.com/my-products/t-shirt-transfer-printing-training-dvd/
Cheers
Martin
Martin Butler if I could get the link to the online version, that would be awesome.
Here you go bud www.udemy.com/how-to-start-a-t-shirt-transfer-printing-business-from-home
funny. and will you have time for your golf in the afternoon?
I'm too busy for golf at the moment. I do love it though and should get out more.
Classic have to go and hide somewhere after lunch .
Cheers
Pete.
Haha, many times Pete lol
Is Amazon a good place to sale T-shirts?
I personally don't think so but i've never tried it.
Thank you.Want to tank u as well for inspiring my son and I to start a father and son T-SHIRT business
I purchased your t- shirt print dvd. It don’t work or won’t play and you have not responded via your website
Hi Tony, I must have missed your email, please resend and put Dvd problem in the subject line and i'll sort it out.
Cheers
Martin
What is your Facebook page called?
You better hope Sharon doesn't fire you Martin.
Haha, I know lol