@@lesslethalfordummiesmake sure that your hammer is just inside of the air tube when un cock. You can take your air valve and hammer out of your gun and blow though the air tube how far the hammer can be inside the tube with out linking air when un cocked. Any more then your marker will fart all the air out. Basically the same thing you did with your TIPX block.
Slightly lighter valve spring. I have pretty much settled on a drive spring pending the TechT bolt test. I will keep lightening valve spring until a malfunction.
@lesslethalfordummies so u still have the light hammer with the fat spring and ball bearing? or did u go back to heavy hammer and ali express drive spring.
@@lesslethalfordummies ok cool, i think i remember the spring setup. u usin the factory hammer or the lighter hammer with the ball bearing and fat spring?
Great test sean. Nice power💥. Good numbers. Bet it will go over 500 fps with the 90 gram🤔👍
Yes i will have to pick some 90g up. I swore i wouldn’t buy anymore but curiosity gets the best of me 🙃
@@lesslethalfordummies Its like that for me also. I say I dont buy more markers or airguns, but cant help it. I just have to have one more 😅
@@runerebel8441🤣🤣🤣
@@lesslethalfordummies 😁🤣🤣
👏👏👏👏👍👍👍👍👌👌👌
I used that techT bolt with alien play balls and it farted. Didn't try with light balls. Also was on 90g C02.
Well i hope mine doesn’t do the same.
Put a stronger spring in your valve and that will fit it.
Also make sure that your hammer is just inside the air tube when it uncork and longer means your hammer spring is to long.
If you’re market start farting after you pull your trigger it’s because your hammer is still touching the valve meaning your hammer spring is to long.
@@lesslethalfordummiesmake sure that your hammer is just inside of the air tube when un cock. You can take your air valve and hammer out of your gun and blow though the air tube how far the hammer can be inside the tube with out linking air when un cocked. Any more then your marker will fart all the air out. Basically the same thing you did with your TIPX block.
whats the setup here?
Slightly lighter valve spring. I have pretty much settled on a drive spring pending the TechT bolt test. I will keep lightening valve spring until a malfunction.
@lesslethalfordummies so u still have the light hammer with the fat spring and ball bearing? or did u go back to heavy hammer and ali express drive spring.
@@PFunk609All Aliexpress.
@@lesslethalfordummies ok cool, i think i remember the spring setup. u usin the factory hammer or the lighter hammer with the ball bearing and fat spring?
@@PFunk609The factory hammer will not work with the bigger diameter spring i am using. I am using the TechT hammer currently.