hi i made purchase of extractor Bolts and it seems not to be compactible in opening Bosch Ecu for Mercedes models 273, 276, 278 how can one get the ones for such ECU models
Please see below link. I use Wynn's black gasket maker. I hope this helps! www.eurocarparts.com/p/wynns-black-gasket-maker-200-ml-555770660?gclid=CjwKCAiA3abwBRBqEiwAKwICA-rEab6rHeb7tndyHIMNC4YtFnZPcffPl6Dn_c2gc2imO8zX2eANBBoCVX4QAvD_BwE
Ive tried multiple times to buy these things but there RMS processor refuses to let my card go through. So aggravating because I used to have a set of these and they really do work much better then anything else i've ever used
Nice job carried out,I am focusing on the learning courses regarding repair/programming/cloning(ref:your video at 15:58 .) please advise me,I am residing in UAE
Do you have a point of contact where we can reach out I have a couple of question ? Website only shows a UK phone number which is not very convinient for international clients
Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis
100% of the people.. perhaps a few excetions... have no means whatsoever to service the microelectronics in an ECU, so most are just after saving $100 or $200 bucks with key reprogramming by swapping the EEPROMS .......
Hi For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks
Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis
Hi Thank you For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks
Keep shaking the can of brake cleaner like it's gonna make it come out when You really need to just hold it level 😉By the way those extractors stink if you're skilled with a screwdriver Razor blade you can have it open in 1 minute
Hello, Please find item in link below: www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts Any questions please feel free to message us. Thank you, Lewis
Hi For tools visit TheOBDshop.co.uk For training in the UK face to face theobdcompany.co.uk For online training visit AutomotiveEducation.online Thanks
Happy it's narrated in English 👍
Hi. Is it needed to add some thermal compound on the side with gray glue which is ised as heatsink before reasembly?
Hi, I bought the ECU extractor bolts. They are very good and works very well.
just got mine today already opened one great tiny tools
after removing the top lid, how do you remove the undercover to take out the whole PCB? Mine won't come out
trying to figure out the same thing
Did you find out??
Bump this. Has anyone managed to get the board out of the other side of the case?
Hi, is there another video showcasing how to raise the circuit board out of the case.
What do heat sinker. If dont contact properly when close didnt work?
What is the thread size and pitch of the removal screws?
good job. just I have a question. what is the grey paste top of rıght . is it termal cream for coolıng or some thıng glue . thank you
My bosc ecu has a black turn knob on it for my focus i was wondering if you have any idea what it is used for
How do you remove the board from the heatsink case
FR. What’s actually holding the board to the other side? That black gasket tar?
th-cam.com/video/3APdC2uUOLE/w-d-xo.htmlsi=4u-3VKGIFywF9ycC
hi
i made purchase of extractor Bolts and it seems not to be compactible in opening Bosch Ecu for Mercedes models 273, 276, 278
how can one get the ones for such ECU models
Wow, incredible...! So where can I buy that special screw...?? Let me know... plzzzzz
Aliexpress!
Your websit link is not secure, browsers and antivirus apps do not allow opeining it. Do you have an alternative secure page?
Thanks
If I need to replace it. And my car is VW Golf 5, 2.0 diesel. 2005 I have to find ECU only from specific cars like that?
Не работает ссылка на болты. Можете повторить? Спасибо!
Ordered over a week ago and still not here, could do worh faster posting and a.comfirmation email
Idol pls..I request the whole picture of the board coz I wanna know the value of burn resistor I've seen..
How much you can charge in UK for opening ECU? If i need that time like you i need stop do this JOB
Hello, could you send me a link for purchasing? Thanks
And what are you doing after flashing for close the ECU? Do you need to glue the edges of the ECU with new glue? And if yes, what kind of glue?
Please see below link. I use Wynn's black gasket maker. I hope this helps!
www.eurocarparts.com/p/wynns-black-gasket-maker-200-ml-555770660?gclid=CjwKCAiA3abwBRBqEiwAKwICA-rEab6rHeb7tndyHIMNC4YtFnZPcffPl6Dn_c2gc2imO8zX2eANBBoCVX4QAvD_BwE
Opened mine and it has little yellow rubber like melted in the joints . Weird
Ive tried multiple times to buy these things but there RMS processor refuses to let my card go through. So aggravating because I used to have a set of these and they really do work much better then anything else i've ever used
How you close the ecu when job is done? new silicone?
Our video upload kijye ecm ic check pe
instead HOT AIR, I use GLUE REMOVER around edges.... letting sit for few minutes and it comes off very easily...
what type of glue remover you use?
What drill press vice are you using there? :)
Nice job carried out,I am focusing on the learning courses regarding repair/programming/cloning(ref:your video at 15:58 .)
please advise me,I am residing in UAE
We have online training available at AutomotiveEducation.online
Do you have a point of contact where we can reach out I have a couple of question ? Website only shows a UK phone number which is not very convinient for international clients
Please WhatsApp us on +447936460285
Thanks
How to call this screw name a?
Dude keep the can in vertical position when you are spraying.....
I was screaming that in my head the whole time 😂
I'm missing the reverse side... the most difficult one!
th-cam.com/video/3APdC2uUOLE/w-d-xo.htmlsi=4u-3VKGIFywF9ycC
Also you use a suction cup and heat
Nice video
nice job mate!
Kya ecu sa spret bdasakte
Lovely content! Keep it up!
i cant fint it on the shop
Hello,
Please find item in link below:
www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts
Any questions please feel free to message us.
Thank you,
Lewis
I usually leave in the freezer overnight that polyurethane will crack easy
Ecu heat gun? Common its just a normal professional heat gun!
nice tool... thats what i need
Why open up a edc16u31 unit when they are obd compliant?
lmfao...
100% of the people.. perhaps a few excetions... have no means whatsoever to service the microelectronics in an ECU, so most are just after saving $100 or $200 bucks with key reprogramming by swapping the EEPROMS .......
Ant C
You could open a EDC16U31 ECU to clone the ECU via BDM. This can't be done via tools like KESS via OBD so you must open the ECU
Thanks in advance idol..
After working on PCs a car ECU looks pretty simple compared to a PC motherboard.
Hi
For tools visit
TheOBDshop.co.uk
For training in the UK face to face theobdcompany.co.uk
For online training visit
AutomotiveEducation.online
Thanks
Same not on website
Hello,
Please find item in link below:
www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts
Any questions please feel free to message us.
Thank you,
Lewis
Espetacular,super
Some people or you buddy? If you dont recommend why are you showing us?
Nice videos sir
Hi
Thank you
For tools visit
TheOBDshop.co.uk
For training in the UK face to face theobdcompany.co.uk
For online training visit
AutomotiveEducation.online
Thanks
Keep shaking the can of brake cleaner like it's gonna make it come out when You really need to just hold it level 😉By the way those extractors stink if you're skilled with a screwdriver Razor blade you can have it open in 1 minute
ecm chik karne h
Hello,
Please find item in link below:
www.theobdcompany.co.uk/product/ecu-lid-extractor-bolts
Any questions please feel free to message us.
Thank you,
Lewis
Nice
17 minutes its easy
Hi
For tools visit
TheOBDshop.co.uk
For training in the UK face to face theobdcompany.co.uk
For online training visit
AutomotiveEducation.online
Thanks
ecu heat gun 😂😂
Damn, that gasket is too narrow. The manufacturers should have more responsability to make it wider. The ECU's are very exposed to moisture.
فضلاعربي
I bet he already had that ecu opened because that looked just too eazy