How to create Ironman model with Fusion 360 Surface Feature

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น • 88

  • @B3D
    @B3D  3 ปีที่แล้ว +6

    Tutorial file can download from here.
    bit.ly/3k9dl7V

    • @vishwakori9530
      @vishwakori9530 ปีที่แล้ว

      I cant download this file sir..

    • @B3D
      @B3D  ปีที่แล้ว

      oh the link outdated .

    • @surendranbalakrishnan5449
      @surendranbalakrishnan5449 ปีที่แล้ว

      Hi can share the new link? @b3D
      Much appreciate it .

    • @B3D
      @B3D  10 หลายเดือนก่อน +1

      @@surendranbalakrishnan5449 i lost the file >.< omg.

    • @TheIslandRiders
      @TheIslandRiders 8 หลายเดือนก่อน +1

      @@B3D ahahahaah! well, you're video is still very informative. thank you for sharing

  • @reactedboss99
    @reactedboss99 2 ปีที่แล้ว +7

    I can't believe it's that simple, Thank you so very much I needed this more that anything when it comes to Fusion 360.

  • @adrianbeltran6391
    @adrianbeltran6391 2 ปีที่แล้ว +1

    I ran into this tutorial a couple months back... for whatever reason I was not proficient enough to see the value and much less understand lol. I appreciate you making this. Thank you Sir.

  • @jinxzmannh
    @jinxzmannh 3 ปีที่แล้ว +13

    Hey man! thanks for sharing this tutorial. I've walked it through and creates a complete helmet. It took me longer than expected, but it feels so good after its completion.

    • @B3D
      @B3D  3 ปีที่แล้ว +3

      congrat ~

    • @jinxzmannh
      @jinxzmannh 3 ปีที่แล้ว +4

      @@B3D I've just created THE STORMBREAKER too😬.

  • @paleman6237
    @paleman6237 6 หลายเดือนก่อน +1

    Just ran into this after starting to dabble with fusion360, and my god this seems to be a lifesaver!

  • @monstersinktees
    @monstersinktees 2 ปีที่แล้ว +1

    Best tutorial I have seen and I watched quite a few. The pace is great for beginners like me.

    • @B3D
      @B3D  2 ปีที่แล้ว

      Great to hear!

  • @armonkhan
    @armonkhan 2 ปีที่แล้ว +2

    It was one the best modeling tutorial in fusion 360:)

    • @B3D
      @B3D  2 ปีที่แล้ว

      No is not alot better

  • @carlos3dprint
    @carlos3dprint 3 ปีที่แล้ว +2

    Hi Bruce!
    Thanks for sharing, for me this is pure GOLD!
    I was stuck into parametric but now with this tutorial i will try the surfaces.
    Thanks again!

  • @seanchilders5028
    @seanchilders5028 3 ปีที่แล้ว +2

    Thank you for the tutorial I just bought a cr-10 it will arrive tomorrow and I've been learning all I can so I have an idea of what I need to do to create a 3d model from scratch rather than buy or download a free stl file. Thank you again man keep making more videos awesome job 🙏

    • @B3D
      @B3D  3 ปีที่แล้ว +1

      Have fun!

  • @Mako_Krafft
    @Mako_Krafft 4 หลายเดือนก่อน

    New subscriber here~ i'm happy i found this content of yours ✨ I'm recently learning fusion 360 and this helps alot and makes much more sense on understanding how to work on complicated shape in 3 dimensional view and angles^^

    • @B3D
      @B3D  4 หลายเดือนก่อน +1

      thank you for the sub. nice to hear that.
      also this is just one of the way to create model .
      there is many more feature updated over time. hope you continue enjoy the learning process

  • @PontiacBandit
    @PontiacBandit 3 ปีที่แล้ว +5

    I followed step by step... to the T... I now have an Iron Man faceplate ready to print!
    Time Elapsed: 5 hours

    • @B3D
      @B3D  2 ปีที่แล้ว

      link ! ~

  • @PlayerCake
    @PlayerCake 2 ปีที่แล้ว +1

    thanks Bruce, playing with the idea of my first helmet and this helped it feel less daunting! fingers crossed!

  • @tomaslobato4002
    @tomaslobato4002 3 ปีที่แล้ว +3

    Thank you for the Tutorial Bruce! :) That helped me a lot, much easier way to do 3d sketch

  • @MossNada
    @MossNada ปีที่แล้ว +1

    Excellent turorial! I was trying another method to make a helmet and it was good but while this method will probably take longer, I think it might have a better result. Thank you!

    • @B3D
      @B3D  ปีที่แล้ว

      use what ever methord will do. my methord on this video is already old

  • @KB0parsi
    @KB0parsi 2 ปีที่แล้ว +1

    Thank you. Learned a lot.

  • @theforcy2252
    @theforcy2252 2 ปีที่แล้ว +1

    Thanks man, hugely appreciated!

  • @PeterAnthonyMartins
    @PeterAnthonyMartins 3 ปีที่แล้ว +1

    Great workflow Bruce!

  • @MrUnmystakable
    @MrUnmystakable 10 หลายเดือนก่อน

    This was excellent. You should continue with more videos aling this line because no one really touches on this. Do you have any work flows that involve this and form modeling together?

  • @CR4FTVR
    @CR4FTVR 3 ปีที่แล้ว +2

    love the tutorial helped me out loads keep up the work

  • @skyrider4789
    @skyrider4789 2 ปีที่แล้ว +1

    @2:07 "Oh, Perfect. Not really perfect, but..." I seriously LOLed😂😂😂Such an Asian statement. (I'm Asian/American btw)

    • @B3D
      @B3D  2 ปีที่แล้ว

      yup I am pure Asian from Malaysia .
      never really Asia so I not sure yet lol.

  • @haseebsafdar6712
    @haseebsafdar6712 5 หลายเดือนก่อน +1

    @4:25 it is necessary to tick mark 3d sktech in sketch palate

    • @B3D
      @B3D  5 หลายเดือนก่อน

      yes

  • @FasihRana
    @FasihRana 3 ปีที่แล้ว +1

    This is really great!

  • @robertpearson6459
    @robertpearson6459 2 ปีที่แล้ว +4

    Another way to achieve this is to sketch the curves on a front view and a side view then use intersecting curves to make the 3d sketch

    • @TheLichOmoi
      @TheLichOmoi ปีที่แล้ว

      𝐖𝐚𝐢𝐭 𝐰𝐡𝐚𝐭

    • @jacobacostamasterscribe2200
      @jacobacostamasterscribe2200 ปีที่แล้ว

      Which method would you use to make the intersecting curves? Or just have lines for every point in both axes and select the intersect points?

  • @HeichH1
    @HeichH1 2 ปีที่แล้ว +1

    thank you!

  • @iblinxalot
    @iblinxalot ปีที่แล้ว +1

    Wooooo got there but jeeez hahahaha i love you

  • @statesmancomics7284
    @statesmancomics7284 2 ปีที่แล้ว +1

    One thing I’d like to learn is everyone presets the type of material in the software I’d like to know how to do that example how you set the forehead to the gold color

  • @statesmancomics7284
    @statesmancomics7284 2 ปีที่แล้ว +1

    Good tutorial thank tou

    • @B3D
      @B3D  2 ปีที่แล้ว

      Glad you liked it!

  • @jorgeramos6392
    @jorgeramos6392 3 ปีที่แล้ว +1

    Very nice

  • @andypandaman1607
    @andypandaman1607 2 ปีที่แล้ว +1

    The video is amazing but I keep taking photos of this helmet I have and the point won't line up I'm not sure if it's a angle issue or scaling so the chin will line up and the top but the middle point won't I'm stuped

    • @B3D
      @B3D  2 ปีที่แล้ว

      Move one direction at one time take time to understand how space in 3D work , then you will got it

  • @abeehasafdar5625
    @abeehasafdar5625 5 หลายเดือนก่อน +1

    Is it important to join the points with only "fit point spline"

  • @ProfessorDanielLobao
    @ProfessorDanielLobao 3 ปีที่แล้ว +2

    Muito boa sua explicação parabéns!!!

  • @2.5km
    @2.5km 3 ปีที่แล้ว +1

    Thank you for open your youtube!!

    • @B3D
      @B3D  3 ปีที่แล้ว

      감사합니다

  • @matekontra5702
    @matekontra5702 3 ปีที่แล้ว +1

    would you be able to just mirror one side once you finished connecting the dots together? that way they are completely symmetric? Just asking because I haven't had a chance to try it yet

    • @billmackinnon6505
      @billmackinnon6505 3 ปีที่แล้ว +1

      At a glance I’m guessing probably not. It will depend on the spline and it’s direction/flow/acceleration If memory serves… cause it’s a 3d sketch it matters.

  • @RicardoBHubner
    @RicardoBHubner ปีที่แล้ว +1

    Obrigado!

  • @haseebsafdar6712
    @haseebsafdar6712 5 หลายเดือนก่อน

    i make sketch as you did but when my forehead plate patched out at that instant my sides and front lines disappeared what should i do
    or how i can tell you my problem by picture or by video ??
    i have alot of interest in 3D modeling

    • @B3D
      @B3D  5 หลายเดือนก่อน +1

      you could just drop the file .
      also you can try difference methord to make it work. form is one of the way

  • @haseebsafdar6712
    @haseebsafdar6712 5 หลายเดือนก่อน

    I locate all the points correctly forehead is patched easily but sides can't so how i patch them i want to select a single line but whole forehead line is selected when i try to patch side due to this reason sides didn't patch correctly

  • @imranharoon9500
    @imranharoon9500 2 ปีที่แล้ว +1

    What if we create one side surface then mirror it?

  • @lawrencepun2483
    @lawrencepun2483 3 ปีที่แล้ว +1

    thanks a lot! learnt a lot from this video. but 1080 still blurry thats the only thing ha.

    • @B3D
      @B3D  2 ปีที่แล้ว

      after one year. my computer upgrade. still try to figure out how to make higher quality screen recording

  • @Fasimedes
    @Fasimedes 3 ปีที่แล้ว

    Can you make fillet or bevel on the edges?
    Thanks for the tutorial man :D

    • @amolshelke9924
      @amolshelke9924 3 ปีที่แล้ว +1

      Yes you can ....befor thichness you can give fillet with radius 5+ after thickness

  • @andresdiaz4337
    @andresdiaz4337 3 ปีที่แล้ว +2

    Part 2 pleaseee

  • @antitialaman7301
    @antitialaman7301 2 ปีที่แล้ว

    Can you share you images/sketchs, please? TY

    • @B3D
      @B3D  2 ปีที่แล้ว +1

      the one I have search from here.
      too busy recently . I think you may already got it.
      grabcad.com/library/iron-man-helmet

  • @dsdkustom8143
    @dsdkustom8143 11 หลายเดือนก่อน

    I tried this method and it does not work for me. I did the point. But they do not connect?

    • @B3D
      @B3D  10 หลายเดือนก่อน

      the point wont connect automatically. you need to work in 3D sketch environment. if some one can it mean you must have some missing step. try again wish you get there.

  • @graysonbilinsky845
    @graysonbilinsky845 3 ปีที่แล้ว

    Can you make a tutorial for a boba fett helmet using the surface feature?

    • @B3D
      @B3D  3 ปีที่แล้ว +1

      T_T I am too busy at work now. I try do it when I spare out some time.

    • @graysonbilinsky845
      @graysonbilinsky845 3 ปีที่แล้ว +4

      @@B3D Dude, no rush, I REALLY appreciate you responding, but seriously, take your time.

  • @dsdkustom8143
    @dsdkustom8143 11 หลายเดือนก่อน

    can you provide the file your using?

    • @B3D
      @B3D  11 หลายเดือนก่อน

      the link outdated myself dont have the access due to multiple edu account ==
      already you may need search for new similar stuff around.

  • @thepolevaultguyjeverett
    @thepolevaultguyjeverett 2 ปีที่แล้ว

    Some of my mesh is backwards and is ruining the thickening process and I don’t know how to fix it. Help?

    • @B3D
      @B3D  2 ปีที่แล้ว

      sorry too busy recently. u slove it yet ?

    • @thepolevaultguyjeverett
      @thepolevaultguyjeverett ปีที่แล้ว

      @@B3D nope. It’s still backwards for some reason

    • @P236236
      @P236236 7 หลายเดือนก่อน

      Delect the face > modify > reverse face

  • @nirmansarkar
    @nirmansarkar 2 ปีที่แล้ว +1

    That's so easy than doing it in Blender

  • @aayeshakhan7596
    @aayeshakhan7596 2 ปีที่แล้ว

    I want to model iron man suit but dont know how. Can anyone help.?
    I dont know where and how to do 3d modeling.

    • @B3D
      @B3D  2 ปีที่แล้ว

      Learn or paid . This is the way

  • @lawrencepun2483
    @lawrencepun2483 3 ปีที่แล้ว

    i follow the step but when i patch, some of the line will disppear

    • @thepolevaultguyjeverett
      @thepolevaultguyjeverett 2 ปีที่แล้ว +1

      Go to the sketch on the hierarchy and then click the eyeball. It auto hides it after it

  • @fkingride.5500
    @fkingride.5500 3 ปีที่แล้ว

    hy do the rest of my lines disapear when i make the first patch ?

    • @B3D
      @B3D  3 ปีที่แล้ว +2

      unhide your sketch

  • @r.in.shibuya
    @r.in.shibuya ปีที่แล้ว +1

    Anyone viewing this tutorial in 2023 should not follow this method.... Use less points with the Control Point Spline... Fit Point Spine will force to use more points as you don't have control over the curve itself. Secondly the canvas image can be found on Grab Cad... It's unfortunate this content creator is not giving credit to the original artist.

    • @B3D
      @B3D  ปีที่แล้ว

      thanks for pointing out. do you make a tutorial? if yes, you can put the link here. i put in a description. because I use more on Nomad now
      btw the image i just google it dont even know where i got .

  • @DaNil-ws8bc
    @DaNil-ws8bc 3 ปีที่แล้ว

    This surface have awfull quality, so