Hey Cisco! Why did you use dynamat for some of the stuff and the 1/4" black neoprene for other parts? Just wondering if I should just get a bunch of one or the other.? Also, where did you get it? Is that a crutchfield thing? I just picked up a 2014 cube with only 11K and I'm prepping for some upgrades :-) thanks!
so I use the dynamat to line on metal, since it reduces vibration and noise. I used the neoprene on plastic surfaces to basically add sound isolation to the plastic.
I'm having a hard time finding the positive and negative wires on the back speakers of my 2009 cube (rockfordfosgate system). The car on both sides of the back doors has a Yellow and Brown wire. ¿Does anyone have an idea of the - and +?
Do you know where to attack cables for speakers for front door on the harnes? I have amp and i cannot rwach door to wire the new cable and i have to attach them on the harnes but which cable is for front left and front right door and - and + for them?
You will see in my videos that I have words pop up on the screen that says left speaker or right speaker + has this color negative is that color watch all the videos and write them down. The colors will be the same near the head unit. Good luck
@@DaGreatBrandonie waaay better. In particular these pioneer tsd1702r models I used had significantly wider base response and was much cleaner since it had a Twitter built into each speaker. And seriously the speakers with two-way crossovers are a class higher than other speakers.
Thank you for posting. This made my stereo replacement a breeze.
Hey Cisco! Why did you use dynamat for some of the stuff and the 1/4" black neoprene for other parts? Just wondering if I should just get a bunch of one or the other.? Also, where did you get it? Is that a crutchfield thing? I just picked up a 2014 cube with only 11K and I'm prepping for some upgrades :-) thanks!
so I use the dynamat to line on metal, since it reduces vibration and noise. I used the neoprene on plastic surfaces to basically add sound isolation to the plastic.
@@franciscoortiz6980 ah, ok! I'll try to find some of that adhesive neoprene stuff too
I'm having a hard time finding the positive and negative wires on the back speakers of my 2009 cube (rockfordfosgate system). The car on both sides of the back doors has a Yellow and Brown wire. ¿Does anyone have an idea of the - and +?
Do you know where to attack cables for speakers for front door on the harnes? I have amp and i cannot rwach door to wire the new cable and i have to attach them on the harnes but which cable is for front left and front right door and - and + for them?
You will see in my videos that I have words pop up on the screen that says left speaker or right speaker + has this color negative is that color watch all the videos and write them down. The colors will be the same near the head unit. Good luck
Will check it again, i was on work and just watch the video without sound. Thanks
Do the speakers plug straight into the factory wiring or would I need an adapter?
I cut the wires and attached typical crimp on Spade connectors. If you pause and zoom in you can see it on the video.
@@franciscoortiz6980 oh ok. How much of an improvement over stock are the speakers?
@@DaGreatBrandonie waaay better. In particular these pioneer tsd1702r models I used had significantly wider base response and was much cleaner since it had a Twitter built into each speaker. And seriously the speakers with two-way crossovers are a class higher than other speakers.