Goededag! I chose Rapid Bike Easy simply because I wanted to improve the air/fuel ratio in the practical range, that is, from low to mid RPM, and to fix the jerky feeling during acceleration. The EVO can do more than that, but I didn't need it.
Ciao! I really enjoyed watching your video. May I ask how the RAPiD Bike Easy is doing with your Guzzi in the long-term? I currently ride a V7 850 Special E5 and would like to fix low RPM jerkiness(at around 3,000 RPM) when I open up my throttle. At first, I was considering to get UpMap T800 in the beginning but found out about RAPiD Bike Easy by watching your video. Would be really appreciated and helpful to hear the your feedback based on your long-term use. Many Thanks!
Ciao! Thank you for watching the video! I am still using the RAPiD Bike Easy, and it has been helpful for stress-free riding! The setting is just as shown in the video, plus one, and it has been great for achieving both responsiveness and smoothness! I think it will work well with the V7 850 too. Please give it a try!
@@PetitGuzzi Ciao! Hope all is well. I was able to purchase and install RAPiD Bike Easy for my V7 850 Special and I am really enjoying it so far! After installing the RAPiD Bike Easy, my Guzzi feels much better at 2,000 RPM to 3,000 RPM range. There is still a little bit of jerkiness but I think this is due to my Agostini exhausts. I might have to switch over to Mistral exhaust later and see the difference. Once again, thank you very much for your detailed review! Looking forward to seeing more videos on your channel!
Are the left and right O2 sensors correctly connected? Did you turn the key on before connecting all connectors? This may cause the check lamp to come on. Is the fuel mixture set correctly? Warm up the car and make sure the Rapidbike light is in working condition, and if all is well, have the store turn off the warning light! I wish you the best of luck in resolving this issue.
@@PetitGuzzi Hi, I have the same question for engine light turn on. it error code display P0130(Lambda sensor Left:to low) & P0150(Blue lower connector throttle grip position sensor - track A:to low) . is must be wait rapidbike green led starts to flash can to ride on everytime?
The review is really all-rounded. Really appreciate your sharing! Can't wait for testing it on my V9!
Thanks for watching the video !
Rapid Bike You will love it!
Yes Try it ! 😁
If you want it a little milder, try the recommended fuel ratio of +2
@Petit_Guzzi Is there a reason you went for the Rapid Bike Easy instead of the Rapid Bike EVO?
Kind regards from Belgum.
Goededag!
I chose Rapid Bike Easy simply because I wanted to improve the air/fuel ratio in the practical range, that is, from low to mid RPM, and to fix the jerky feeling during acceleration.
The EVO can do more than that, but I didn't need it.
Ciao! I really enjoyed watching your video. May I ask how the RAPiD Bike Easy is doing with your Guzzi in the long-term?
I currently ride a V7 850 Special E5 and would like to fix low RPM jerkiness(at around 3,000 RPM) when I open up my throttle.
At first, I was considering to get UpMap T800 in the beginning but found out about RAPiD Bike Easy by watching your video.
Would be really appreciated and helpful to hear the your feedback based on your long-term use.
Many Thanks!
Ciao! Thank you for watching the video! I am still using the RAPiD Bike Easy, and it has been helpful for stress-free riding! The setting is just as shown in the video, plus one, and it has been great for achieving both responsiveness and smoothness! I think it will work well with the V7 850 too. Please give it a try!
@@PetitGuzzi Thank you very much for your detailed feedback! I will definately give it a try.
@@PetitGuzzi Ciao! Hope all is well. I was able to purchase and install RAPiD Bike Easy for my V7 850 Special and I am really enjoying it so far! After installing the RAPiD Bike Easy, my Guzzi feels much better at 2,000 RPM to 3,000 RPM range. There is still a little bit of jerkiness but I think this is due to my Agostini exhausts. I might have to switch over to Mistral exhaust later and see the difference. Once again, thank you very much for your detailed review! Looking forward to seeing more videos on your channel!
I installed the kit on my bike but after the installation the check engine light turned on. Any idea why?
Are the left and right O2 sensors correctly connected?
Did you turn the key on before connecting all connectors?
This may cause the check lamp to come on.
Is the fuel mixture set correctly?
Warm up the car and make sure the Rapidbike light is in working condition, and if all is well, have the store turn off the warning light!
I wish you the best of luck in resolving this issue.
Thanks that worked out. Engine light turned off by it self after a while 👍🏻
Congratulations!
Have fun on RapidBike!
@@PetitGuzzi Hi, I have the same question for engine light turn on. it error code display P0130(Lambda sensor Left:to low) & P0150(Blue lower connector throttle grip position sensor - track A:to low) .
is must be wait rapidbike green led starts to flash can to ride on everytime?
👍👍👍🇮🇹
🦅❤🇮🇹