There is an old naval trick to remember the length of chain you have out. There is also a standard colouring code for this. It goes like this: 'Rub Your Balls/Boobs With Grease' meaning Red Yellow Blue White Green.
Nice work in this episode. I knew when you were coming down the ramp that you had a Bambu Lap 3D Printer. Then when your got it out of the box I knew it was the X1 Carbon series, which is the same printer sitting right next to me on my desk in our 42 foot Fifth Wheel full time home. It is by far my favorite 3D printer and I own 4 of them now, but we only have room for the X1C in our full time Fifth Wheel RV home. If you want any suggestions on what spare parts to have on hand, let me know and I’ll send you a list of highly recommended items to add to your supply list before you head out on the water. If you plan on printing a lot of PETG, PC, ASA or ABS you will definitely need the High Temp plate or a good PEI plate. I use Magigoo on the cold plate and it seems to work the best, plus the plate can be cleaned up with just water and an old credit card to easily scrape it off after it’s wet. I am learning to use Autodesk Fusion 360 for the 3D modeling, but that’s still a work in progress.
Now I know how to do my future work shop/sewing room. On your channel; I learn, take notes, save it in my "how to on my boat", and laugh like crazy. Thank you guys.
What is the brand of the electric toilet? Also, manufacturer/contact for the 48-volt air-conditioning unit. We hope to install new toilet and A/C ASAP! Many thanks!
sanimarin is the toilet brand. The air conditioning doesn’t have a brand name, they are from China and they private label. We will be doing another episode soon re the Aircon and how to get them
You just had to say "We'll put a button in this project and call it done!" before everything was tested.... ALLL of your experience and ALLL of your knowledge and you still make a rookie mistake tempting fate like that 😀
Me, sitting here seeing Ty wanting to rebuild the cabinet to stick the printer in, hoping he realizes that the filament spool goes on the back, so putting it in the cabinet would end up being a massive PITA.
You 2 guys do make me smile on cloudy days
There is an old naval trick to remember the length of chain you have out. There is also a standard colouring code for this. It goes like this: 'Rub Your Balls/Boobs With Grease' meaning Red Yellow Blue White Green.
Yup we bought a 3d printer last year for our cat and have made a lot of parts. Solar panels mountings, fuse holders etc . Very nice for sure
That is awesome!
Nice work in this episode. I knew when you were coming down the ramp that you had a Bambu Lap 3D Printer. Then when your got it out of the box I knew it was the X1 Carbon series, which is the same printer sitting right next to me on my desk in our 42 foot Fifth Wheel full time home. It is by far my favorite 3D printer and I own 4 of them now, but we only have room for the X1C in our full time Fifth Wheel RV home. If you want any suggestions on what spare parts to have on hand, let me know and I’ll send you a list of highly recommended items to add to your supply list before you head out on the water. If you plan on printing a lot of PETG, PC, ASA or ABS you will definitely need the High Temp plate or a good PEI plate. I use Magigoo on the cold plate and it seems to work the best, plus the plate can be cleaned up with just water and an old credit card to easily scrape it off after it’s wet. I am learning to use Autodesk Fusion 360 for the 3D modeling, but that’s still a work in progress.
Thanks for the tips! I love that list can you send it to me via email? Thecrew@sailingdauntless.com
That work shop looks awesome! Will be a pleasure to work in. Be well ❤
You guys must watch risky chrisky with rolling that beautiful beam footage
Looking promising!
Now I know how to do my future work shop/sewing room. On your channel; I learn, take notes, save it in my "how to on my boat", and laugh like crazy. Thank you guys.
Glad to help!
Look forward to these weekly videos.
New 3-D printer!! WOO HOO!!
Carbon X1. Nice! I’ve been looking at the same printer…
Good progress! Is the cabinet getting redone fir the 3-D printer?
Paint your chain different colours at 60 feet intervals
Shitshooter 3000🤣🤣🤣🇦🇺
The simplicity of a compost loo. And Nil built in tanks.
👍🏽
Frank and us got did done dirty! We will not know about what happened....
Day 3 on a 5 minute Boat Project. We'll what had happened wuz!!!
Greasing the shaft he said
What is the brand of the electric toilet? Also, manufacturer/contact for the 48-volt air-conditioning unit. We hope to install new toilet and A/C ASAP! Many thanks!
sanimarin is the toilet brand. The air conditioning doesn’t have a brand name, they are from China and they private label. We will be doing another episode soon re the Aircon and how to get them
@@SailingDauntlessthank you! Looking forward to it! You're doing terrific work!
You just had to say "We'll put a button in this project and call it done!" before everything was tested.... ALLL of your experience and ALLL of your knowledge and you still make a rookie mistake tempting fate like that 😀
Lol, rookie mistake…….
Are you guys ever going to go sailing???
Lol, we ask ourselves that question often. The answer is always the same.Yes! But not until she’s back together properly
@@SailingDauntless hurry the fuck up because I can't!!!!
With the holidays coming up, it’s almost un-American that you didn’t show a clip of cousin Eddie from Christmas Vacation saying “$hitters full”.
Ha!
👍✅🤣
Me, sitting here seeing Ty wanting to rebuild the cabinet to stick the printer in, hoping he realizes that the filament spool goes on the back, so putting it in the cabinet would end up being a massive PITA.
lol, and you got the AMS, so it would have never fit in there anyways....
Just wait… I’ve got something up my sleeve
Did someone says bewbs???
you know bambu lab needs constant cloud connectivity i hope 🤔
Starlink should cover it most of the time if not, I can run, off-line and sacrifice some features