Forgive me if im being a bit dim si. But the wheel travels more than the shock because its further from the center point of youre arc. Also be aware that because the wheel is on an arc from a fixed point the wheel will come forward it a tangent to that arc. It will barely be noticable.
You only take the Motorcycle in once , [ If it passes first time of course ] , the Brackets for the Number Plate can easily be altered after the Test . Not that I condone any such actions . The stand off Number Plate could be made to look quite trick .
Hey Quickie didn't realize how big the plates were getting over there, why not make it flip horizontal then you can use it as a picnic table when you stuck in one of those traffic jams you have, why two plate on a side mount , rear plate has to be visible at so many degrees at x number of meters ( sorry feet) to either side of the bike viewed from the rear, and this is only the start .
Hey Quickie, I guess I missed it if you did mention it, but why not go with a smaller lighter battery vs that big lump of lead of a battery? Great work, keep it up, Cheers!
If you need to refresh your memory with the English wheel there are a few good TH-cam channels to watch. There is a guy with a Chinese Wheel although his method is very strange. 😮
hiya mate mike here what size main jet did you use for the pods mate want to put them on my 600 bandit take airbox off pls help cheers mike ride safe this summer bro 😛
I've just put a dynojet stage 1 kit in it with 114 Dynojet mail jets. We're booked in for a Dyno run on the 8thnif you want to wait and see what it goes like 😁👍
I'd guess the regs are based upon a generic all vehicles format, so 'PlateS' could be carried over from that for a truck or something that requires additional plates like Long or wide vehicle. Or maybe not...
To be fair if the plate was on the left side of the wheel and Mr Policeman was on the right, he wouldn’t be able to see it. That’s my theory anyway. Doesn’t alter the fact that a number plate there looks stoopid anyway.
Hi, when you did the gearbox on the zzr how bad was it to get the gears back into neutral. My starter clutch has just gone and I'm knackered without my bike.
That wasn't a problem matey at all. All the gears selected easily, it was just jumping out of 5th because the dogs on the 5th gear sprocket were badly worn.
What happened to actually getting work done on the bikes on this channel…..it’s getting more and more of him raving on….26 min video and literally doesn’t start doing anything until at least half way through! At least delboy actually does work!
Hehehe... Well, I need to do the hump, so Sherman is out to play this weekend. I don't need to use it as a bead roller though coz I've got one of them 🤣😂😅
Panigale look looks pretty cool I think and I will fit on that seat 😀
It could look alright I reckon, so no it's getting mocked up 😁👍
Using the drill press with your safety goggles on your forehead... 😜
I do like the tucked in number plate position though !
Hehehe.... Yeah, I know 😂🤣😅
She’s looking good!
Thank you 👍😁
Coming along nicely - dont worry about the seat space I am very slim so I will be OK :)
Hehehe... Another confident fella 😁👍
Looking good mate. Looking forward to seeing you working with Sherman.:-)
It's been a while, but I'm looking forward to it 😁👍
what regards the wheel travel: just pop the spring off the shock and put it back in. then however much you can move the wheel are your travel limits.
I was going to ratchet it down and add a bit 🤣😂😅
Forgive me if im being a bit dim si. But the wheel travels more than the shock because its further from the center point of youre arc. Also be aware that because the wheel is on an arc from a fixed point the wheel will come forward it a tangent to that arc. It will barely be noticable.
It's not worth risking it on the MSVA test just because one person thinks it'll be ok and another person questions it...
You only take the Motorcycle in once , [ If it passes first time of course ] , the Brackets for the Number Plate can easily be altered after the Test . Not that I condone any such actions . The stand off Number Plate could be made to look quite trick .
I reckon it could look quite good if done right... Gonna have to mock it up for a look see 😁👍
Travel is “usually” calculated by shock “travel!” Obviously the length of swing arm, size of tyre etc makes a difference. IMO
Thanks dude 👍
Hi looking good, what if you were to extend the seat platform a couple of inches " I am old " this would also give more room for the number plate .
It would matey, but that's quite a bit of work and I've done this now 😂🤣
Looking rather snazzy.
Thank you matey 😁👍
Hey Quickie didn't realize how big the plates were getting over there, why not make it flip horizontal then you can use it as a picnic table when you stuck in one of those traffic jams you have, why two plate on a side mount , rear plate has to be visible at so many degrees at x number of meters ( sorry feet) to either side of the bike viewed from the rear, and this is only the start .
They're stupid BIG matey... I only expect the 9x7 plate to be a temporary thing 😂🤣
Watch the bolloxs he's well into seat now lol
Hehehe... It was a good watch though hey 💡😂🤣
My vote for the Panigale look
It could be made to look quite nice I reckon 😁👍
Hey Quickie, I guess I missed it if you did mention it, but why not go with a smaller lighter battery vs that big lump of lead of a battery? Great work, keep it up, Cheers!
I'm still not sold on the idea of lithium batteries, so I'm sticking with the gel battery for now. Just a personal choice really 😁👍
If you need to refresh your memory with the English wheel there are a few good TH-cam channels to watch.
There is a guy with a Chinese Wheel although his method is very strange. 😮
That's not a Chinese wheel, that's a rolling pin matey 😁
Just make a temp one to get it through the test. Then whens it's legal, make it pretty with an alternative Mount to suit.
There's definitely going to be an MSVA / MOT version 😂🤣😅
hiya mate mike here what size main jet did you use for the pods mate want to put them on my 600 bandit take airbox off pls help cheers mike ride safe this summer bro 😛
p.s its the wifes account ;-)
I've just put a dynojet stage 1 kit in it with 114 Dynojet mail jets. We're booked in for a Dyno run on the 8thnif you want to wait and see what it goes like 😁👍
I'd guess the regs are based upon a generic all vehicles format, so 'PlateS' could be carried over from that for a truck or something that requires additional plates like Long or wide vehicle. Or maybe not...
I'm not sure, but it seems silly on a bike. Dunno, you could be right matey 😁👍
To be fair if the plate was on the left side of the wheel and Mr Policeman was on the right, he wouldn’t be able to see it. That’s my theory anyway. Doesn’t alter the fact that a number plate there looks stoopid anyway.
@@QuickBikes it is silly on a bike 💯%
I agree Martin. I saw a photo / video of a Bandit Cafe Racer with a side mount and it just looks wrong... 👍
No plate. Doesn’t need illumination on motorcycle
Hehehe... 😁👍
I think it's the size ov the letters 🤓
Hehehe...
Hi, when you did the gearbox on the zzr how bad was it to get the gears back into neutral. My starter clutch has just gone and I'm knackered without my bike.
That wasn't a problem matey at all. All the gears selected easily, it was just jumping out of 5th because the dogs on the 5th gear sprocket were badly worn.
What happened to actually getting work done on the bikes on this channel…..it’s getting more and more of him raving on….26 min video and literally doesn’t start doing anything until at least half way through! At least delboy actually does work!
Then stop watching it... Go watch Delboy instead... Easy init...!!
Dell's just done Chinese wheeling Quicky yo won't be copying our Derrick are you. Remember shit matt got into
Hehehe... Well, I need to do the hump, so Sherman is out to play this weekend. I don't need to use it as a bead roller though coz I've got one of them 🤣😂😅
❤🛠🔧🏍😂
🤣😂👍