Yea all 22LR will be good to shoot out of it but if it cycles I can not tell you cause rifle have never shot it personally !! It’s its hyper velocity it should work just fine!! Thanks again for the comment brotha I appreciate it
I will say that one thing I have discovered is that you really want to clean and lube the entire section of the grip module / frame that the slide comes into contact, not just the rails. Crud tends to build up along the side of the barrel, and this can remove enough slide velocity to cause you issues.
That makes sense I’ve seen that issue before an I always got my he grip module. This video was filmed right end the gun was released.!!!! Thanks for the comment man !!
If you have the SIG included suppressor barrel bushing installed you cannot remove the slide. Also if you failed to remove the mag the disassembly lever cannot be rotated.
I’ve just have had bad luck with that particular optic. I’ve sent multiple Romeo Zeros that can’t be sighted in, adjusted screws strip or even stuck, emiter glass break, jus to name a few. It’s just not a good optic in my opinion
We just attached the high pressure cleaner onto the Ballistol canister. No need to disassemble the guns when one can clean them from a save distance with astonishingly effective short bursts. 😂 Just joking, actually I'd like to know if the leading of the Sig barrel is a real thing or was this just some user's experience with bad ammo or something. Greetings from Austria! ❤
Oh man that’s awsome your watching from over the pond !!! Thank you for the support I’m glad u liked the video and don’t ever u Balistol lol 😂 that will kill ya from the fumes
Wow, you have to clean yours? I got one about three weeks ago and mine is a POS and doesn't work. One of those three weeks was back at Sig, I sent it back the next day after I bought it. It came back with a list of what was done to it and it still only sort of half ass works. Last range session, I fired close to two magazines, three failures to feed, two stove pipes and one light hit. Mine absolutely will not feed anything hollow pointed. I've used Remington Golden bullets, Winchester Super X, CCI Minimags, Federal Automatic Match and Aguila. Longest string I have managed to fire is seven rounds before it malfunctions. And the rounds nose dive in the magazine and stick. Apparently, Sig hasn't heard of anti tilt followers in their mags because the rounds nose dive and fail to feed or feeds at the wrong angle and the rounds stove pipe. If you load them just so, the recoil still shakes the rounds around and several will nose dive while shooting.
How to clean 22 pistol: Unload. Lock open. Toss in gasoline bucket. Swish. Retrieve. Boresnake. Drop in preservative bucket. Retrieve. Shake and wipe to suit storage requirements.
Great cleaning video. Any issue with your p322? I have seen this and other have mag and barrel issues. like this review th-cam.com/video/lCSCfVB3cnk/w-d-xo.html
Some 322’s have out of spec barrels, if yours is one of them, give SIG a call, get a ticket and send it back. They have been very good with quick turnaround times. By The Way, too much LUBE is not a good thing my friend. You drenched that SIG, IMO.
You didn't use enough oil. I have a 5 gallon bucket of rem oil and I dunk the whole gun in it after cleaning. 👍
I was thinking a 10 gallon bucket
Way too much oil
Lol
LOL not too good for clean i use my cooking oil and deep whole thing in and cook 10 min
guaranteed every thing come out
I rave my range in a swimming pool full of oil and I use SCUBA gear to shout from under the oil. I still feel like I should use more oil.
Need some p322 to go with that lube? 😂
100% Thought the same thing.
I can tell you love the gun the way you throw the clip around and I think you way overdid it with the lubricant
Said no girl ever
This guy will never touch one of my weapons he is a hack and will cause problems for any gun he touches
I own a P322. Question: CCI has a new CLEAN-22 Hyper Velocity 22LR ammunition they rate for “Target” shooting. Is it safe to shoot in my P322?
Yea all 22LR will be good to shoot out of it but if it cycles I can not tell you cause rifle have never shot it personally !! It’s its hyper velocity it should work just fine!! Thanks again for the comment brotha I appreciate it
I will say that one thing I have discovered is that you really want to clean and lube the entire section of the grip module / frame that the slide comes into contact, not just the rails. Crud tends to build up along the side of the barrel, and this can remove enough slide velocity to cause you issues.
That makes sense I’ve seen that issue before an I always got my he grip module. This video was filmed right end the gun was released.!!!! Thanks for the comment man !!
No patch down the bore after putting solvent and oil down it?
"Those who can't do, teach"... Jesus, I'm gonna have nightmares about this shit. 😂
Happy to help 🤙
Put a cover on your red dot whenever cleaning or storing.
If you have the SIG included suppressor barrel bushing installed you cannot remove the slide. Also if you failed to remove the mag the disassembly lever cannot be rotated.
"Let's make sure this gun is safe" as you have your right hand in front of the barrel lol
Great video.
Thanks
No problem man
Why does the romeo zero suck? I have about 500 rnds through the gun with it on and have found no issues. Please explain.
I’ve just have had bad luck with that particular optic. I’ve sent multiple Romeo Zeros that can’t be sighted in, adjusted screws strip or even stuck, emiter glass break, jus to name a few. It’s just not a good optic in my opinion
Yes.... I have the Zero Elite on my 365 X its super with 3 yrs on the battery..... no issues at all!
“That’s where the striker goes. . . .”???? This is not a striker-fired gun. It is hammer-fired.
What type of brush are you using
I use a Nylon Brush when cleaning all my guns
Totally agree with @slittle725. I would actually be afraid to be around when he fires his pistols after "cleaning" them.
We just attached the high pressure cleaner onto the Ballistol canister. No need to
disassemble the guns when one can clean them from a save distance with astonishingly effective short bursts. 😂 Just joking, actually I'd like to know if the leading of the Sig barrel is a real thing or was this just some user's experience with bad ammo or something. Greetings from Austria! ❤
Oh man that’s awsome your watching from over the pond !!! Thank you for the support I’m glad u liked the video and don’t ever u Balistol lol 😂 that will kill ya from the fumes
Seems no one reads the owners manual. They are dishwasher safe.
Lol that would be interesting
Lmao!! 🤣
THE ONLY BAD THING IS THAT NICE FIREARM IS NOT MASSHOLE COMPLIANT
Ik I can see it getting on the Roster next go around
It actually is now, started shipping with the 10 round mags in November I believe.
It is now. I just bought one
It is now I just picked one up last week.
Oh. My. LORD.... LOL.😳😆
Wow, you have to clean yours? I got one about three weeks ago and mine is a POS and doesn't work. One of those three weeks was back at Sig, I sent it back the next day after I bought it. It came back with a list of what was done to it and it still only sort of half ass works. Last range session, I fired close to two magazines, three failures to feed, two stove pipes and one light hit. Mine absolutely will not feed anything hollow pointed. I've used Remington Golden bullets, Winchester Super X, CCI Minimags, Federal Automatic Match and Aguila. Longest string I have managed to fire is seven rounds before it malfunctions. And the rounds nose dive in the magazine and stick.
Apparently, Sig hasn't heard of anti tilt followers in their mags because the rounds nose dive and fail to feed or feeds at the wrong angle and the rounds stove pipe. If you load them just so, the recoil still shakes the rounds around and several will nose dive while shooting.
500 rounds no failures thats ZERO failures... dont know what some of you guys are doing to have such bad results... mine runs great.
So, do you let it hang to drain the Lube out of it, or just use patches? 🤣🤣🤣
lol what ever works for you
All that oil is to catch more gun powder and then clogging it up
its not that much oil everything is ok
I don't know about the trigger to die for. It was mushy, mushy, mushy, clunk for me
@Shooting Gallery NE HEY JOE WHAT HAPPENED YESTERDAY I THOUGHT YOU WHERE GOING TO SHOIT THE GUN I BROUGHT DOWN EVERYONE ELSE THAT WORKS THERE HAD A GO
Got busy with some work an then lost track of time lol my bad dude next time I’ll have a go at it
Sloooopy!
Make sure you don’t melt the p322 with cleaning liquids since is 80% plastic 🤣😂
Aegis Products will not hurt plastics. So clean away!
G96’s Crudbuster is Polymer Safe!
Sig Romeo Zero sucks....100% correct
lol very true thanks for the comment man !!
😳
How to clean 22 pistol:
Unload.
Lock open.
Toss in gasoline bucket.
Swish.
Retrieve.
Boresnake.
Drop in preservative bucket.
Retrieve.
Shake and wipe to suit storage requirements.
Great cleaning video. Any issue with your p322? I have seen this and other have mag and barrel issues. like this review th-cam.com/video/lCSCfVB3cnk/w-d-xo.html
It’s a range gun so I haven’t had in the shop for have issues but time will tell glad u liked the video by the way !!!!!
THE P322 HAS A LEADING PROBLEM ...!!!! YOU TUBE HAS SEVERAL VIDEOS ON THIS PROBLEM ....!!! " BUYER BEWARE ".....!!!!!!!!! DOUBLE G. HERE ...!!!!
Some 322’s have out of spec barrels, if yours is one of them, give SIG a call, get a ticket and send it back. They have been very good with quick turnaround times.
By The Way, too much LUBE is not a good thing my friend. You drenched that SIG, IMO.
I just bought this pistol. Having trouble finding the videos you’re talking about. Could you help me out? Thanks?
Total waste of time video !!