Great content!! I really enjoy your videos about KNX, it's a very powerful system and it should be spread more. It would be very interesting to see a video showing a real system, to understand how and where all the components are mounted.
Personally I rather use "phoenix PTFIX 6/6X2,5". Since they have the option to easily take out a wire. They are also din mountable and in different colours available. But thanks for your great video! ;)
Cable cores should never ever come in contact with the 230V wires. > = 4mm clearance space. Also do not remove more sheath from the cable then needed. This would not pas an inspection.
Thanks! In Wago connector, I terminated both the red-black and yellow-white wires, although I didn't actually need them in this installation. The reason I do that in every installation is to be prepared. For example, when I have a KNX device that requires additional auxiliary power through the yellow-white wires, I'm already set.
Thank you for your comment! In Greece we buy Wago products from Dimoulas : www.dimoulas.eu/klemmes-bysmata/caps/mounting-carrier-for-6-connectors-243-series-for-din-35-rail-mounting-screw-mounting-orange/
Thanks, I didn't know those 8-way DIN connectors existed. I'm asking my supplier for them now :)
You are welcome! Thank you for your comment!
Great stuff!
Great content!! I really enjoy your videos about KNX, it's a very powerful system and it should be spread more. It would be very interesting to see a video showing a real system, to understand how and where all the components are mounted.
It is in our plans to make such a video. Thank you for your comment!
Phoenix Contact make KNX-specific terminal blocks that can be bridged.
Personally I rather use "phoenix PTFIX 6/6X2,5". Since they have the option to easily take out a wire. They are also din mountable and in different colours available.
But thanks for your great video! ;)
Thank you for sharing that and for your comment! I will give it a try!
Spectacular video tutorial, preciate👏🏽👏🏽👏🏽
Thank you!
1:30 , if i wanted, i can connect the cables directly to the actuators, right ?
شكرا ❤
You are welcome!
Cable cores should never ever come in contact with the 230V wires. > = 4mm clearance space. Also do not remove more sheath from the cable then needed. This would not pas an inspection.
Thank you for your feedback. If you have any additional info or best practises please share them.
Nice work!
But I have a question!
How do you connect white and yellow wires? You conected only red and black...
Thanks! In Wago connector, I terminated both the red-black and yellow-white wires, although I didn't actually need them in this installation. The reason I do that in every installation is to be prepared. For example, when I have a KNX device that requires additional auxiliary power through the yellow-white wires, I'm already set.
Where can you download a map of wiring and how to wire a building with different equipment
What do you mean a map of wiring? Normally before installing the KNX devices there is a KNX study that must be followed.
Great video , where did you find those wago products ?
Thank you for your comment! In Greece we buy Wago products from Dimoulas : www.dimoulas.eu/klemmes-bysmata/caps/mounting-carrier-for-6-connectors-243-series-for-din-35-rail-mounting-screw-mounting-orange/
anyone can sent me the basic Instalation of KNX
because my vendor Disepier
Μήπως δε θα έπρεπε να κόψεις τα συρματάκια γείωσης των πράσινων καλωδίων αλλά να τα γειώσεις σε μια μπάρα;
KNX Wires are not to be „earthed“ at either side.
Not sowing clear
If you mean the video, press the gear button on the bottom of the video and select resolution 1080p HD.