3D Printed Gear Pump - Biggest I Have Ever Built
ฝัง
- เผยแพร่เมื่อ 21 ม.ค. 2023
- PCBWay Your 3D & CNC One-Stop Solution: www.pcbway.com/
Recently I gave built a lot of different 3D printable water pumps, but a gear pump hasn't got the attention that it deserves. In this video I built and tested it, how well did it work? Well, u see this in the upcoming video.
Also, u can download the model and build this pump by yourself.
Download this model for free: www.thingiverse.com/thing:580...
________________________________________________________________
MY PATREON PAGE: / letsprintyt
________________________________________________________________
_______________________________________________________________
Facebook: www. letsprintyoutube
Instagram: / letsprintyoutube
________________________________________________________________ - วิทยาศาสตร์และเทคโนโลยี
![CAMPปลิ้น | EP.76[1/2] โจโฉเปิดป่าโหดรับโอ๊ต-ป๊อบ รอบนี้พี่เอาจริง!](http://i.ytimg.com/vi/pNg5O7Pf-a0/mqdefault.jpg)
He is slowly becoming a memer
And I love it 🤣
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
@@mmorgz6622 GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
@@xeither289 hail Satan
you god(t) spammed by bots
If threads are too tight, take the fitting back out and heat it over a flame for a few seconds. It will soften the plastic as you screw it in.
Love how you've just given up on saying "rigid flange coupling" :D always entertaining and fun watch! Cheers from Stockholm
The gear pumps flow depends of the speed of the motor. I need to make a pump and your videos are the best option I have found. Thanks.
The sealing tape, well , you wind it the wrong way sometimes. Always go with the thread direction.
Great sense of humour! I think it's time to completely rethink your pump design approach and strategy. I thought you quit these a while back but understand the "damnit, I'm no quitter" attitude! Working on a completely new "thing" will be good for your mind and subs too. Looking forward to seeing the next video
Awesome vid! Love the redo
I love the editing of this video. keep up the great work
I might miss the water pump development, you are really honing your skill, almost no leaks. Looking forward to whatever comes! I like your style. btw i wonder how modifying the intake runner would help performance. perhaps a split fork Y directing the flow around the gears?
Leaks = valid! keep it up!
It's normal response of gear pump,So well Done
I'm all pumped out.
TIP: get a 3D pen
I 3D print a lot and prints break a LOT and its just super easy just to break out the 3D pen and weld the plastic back together! Also thanks for showing your errors. makes me feel better about mine...... great vid!
Informative and entertaining.
I like your channel. The Rock and Laughing-mexican-guy inserts were funny!
Awesome work and design, dude! Well done! 😃
But yeah, dc motors HATE water. If any get on them they just die. 😬
Anyway, stay safe there with your family! 🖖😊
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
Good job!!! a flowmeter at the water outlet and an amp meter will tell you accurately the performance of the machine
You designed grooves for a seal against the acrylic cover but used silicone? Why not use a piece of tpu for the seal?
Hey, i thought you were not going to make any other water pumps, not that i have a problem though... i always love those leaking like hell pumps xD
P.S. the pump cannot leak if it's completely submerged under water (we smart).
Try drilling and clamping the intake side to brace it.
its just funny, how u put in the Ryobi Drill IN the water of the bathtub .... like .... like its a waterproof one xD funny vid :D
I have an idea.Why don't you make a dual flexi-impeller pump after the break.
Bring back the old Rigid flange coupling
as someone who owns and ender 3 s1 pro, im happy to see other people use it. its actually one of the best printers for its price
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
Great video !
Ideal for next videos : create pomp but for air aka superchager OR propeling system for a boat like a screw propeled by a dril
Good luck and keep it going ;)
A pump suing the jet system that some boats use should work really well, at least the RC boat I made went pretty fast and pushed a lot of water.
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
@@almaefogo GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
I wouldn't have made the ports on the split, but on a solid part, maybe a 45 or 90 degree channel?
Nice
About a year ago, I attempt to fix clearances in a friend’s files of a gear pump he had designed and since they are precisely precise precision tools with intertwined intolerable tolerances, finely tuning and or fixing it went out the window with the first step of the project just like you also recently experienced 😅
What really fcuks with my mind is the gear rotation direction and flow direction are seemingly opposite when point of reference is referenced accordingly. The water enters the housing maybe’ and is immediately presented with a quantum shift around the drive gears, smashed but not compressed against the housing then suddenly rejoined in the matrix with not a moment too soon before collimating out the exit orifice of low pressure, or high pressure now, lolz
Right!? One expects the flow to go straight down the center in-between the gears. NOPE! The flow of the fluid wraps around in-between the walls and gears.
If you want higher flow you need to focus the geometry of the vallies, such as the root circle, pitch circle and the Dedendum. The only parts that needs to be precise are the gaps between the addendum or the tip of the gear and the outer walls. The second precise location are the face of the teeth, they need to maintain a good seal with each other.
Can you make a gear system that multiplies the speed to crank the pump?
My mom would kill me if I sprayed water on our sidewalks in freezing temps lmao
Make a positive displacement plunger pump
What about a doble screw compressor that could action a piston ?
Dude I wish I had a spaceship bath like that too.
Has anyone eles noticed a black rectangle in some videos? But when you rewind the video it's gone? It's like a problem with youtube I think? Maybe my phone I have an S22 Ultra? Awsome video btw.
What a lame flex
How about trying a Gerotor pump?
hey uh stupid question and i doubt anyone will answer it but what software is he using for making the parts
If the inlet and outlet ports were designed separately and printed perpendicular to the flow of water then the layers wouldn’t separate. Then if they did fail you could simply print more and even modify the entire design without having to replace the main gear housing. 🥳
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
As always Interesting Video! One advice i can give you: you can try out sealing cords for End caps. You can get them in any cord diameter. Just cut them to the length you need and use superglue on the ends to make a custom O-Ring. Makes it a bit easier and less messy, if you have to open these caps again for whatever reason.
Keep it up!
I have watched your videos for a while now. I wonder why you have not made a 3d printed TPU gasket on any of these. I think it would fix lot your problems
honestly
why you didnt print a tpu rubber seal?
what is the psi on this
Emotional damage 😂🤣
The pump sounded like chewbucka
I`ve disassmble NSh-10 (НШ-10) for repair and it`s made more complicated.
There are double seals. Outside from inner seal connected for intake, to eleminate sealing leakage on high preshure.
P.S. And it`s not self priming. If you tell the highpreshure pump to suck it woudnt do it.
P.P.S. And used one cost not so many - around 10-15$, if you want to made HP washing machine.
Make the gears touch the wall of the housing and you will be able to self prime.
gear pumps, lobe pumps and screw pumps is good at building pressure, not velocity.. so if you really want to see the performance, you need to connect a pressure gauge to it.
Can you build a hydraulic rotary motor?.
For the love of god when will you stop putting COMING SOON! in the link of the files? Some designs you upload and some you put coming soon but I find your designs to be awesome and unique and I want to print them! PS: on your video of the pressure washer you put the pumps in parallel instead of in series. I know very little of fluids but I believe putting them in series (one after the other) would make the pressure washer have more pressure in exchange of being less able to push more quantity of water. Thank you a lot if you happen to read this
How much is your gear pump.
Lontra air compressor to pump water 🌊
Semangat
Maybe invest in flow meter then you can actually measure the performance
When you IQ equals to room temperature hahahah i sharted man 🤣
Why I get Finnish vibes from that rally English accent 😅
Why not just use an o-ring under the lid?
love the meme
Чтобы не было такой фигни, как на 4:05, нужно чтобы ось отверстия была перпендикулярна укладываемым слоям пластика, а не лежала в их плоскости.
You put your thread tape on the wrong way
Don't you really hate errors..like you print 15 hours to find an error to then fix it and loop over and bloody over again lol :)
why so, you try to squeeze water between the gear teeth, centrifugal impeller pump is the best, no unnecessary squeezing
hey its quite a lot in kelvins tho
thats no air succing pump, it leaks
self-priming is the air capable pump
also the centrifugal self-ducted impeller does not jam if there is trash in the pipe, the gears will shear with minimal trash content
not very trash/crap resistant, industrial guy
3D Printed piston pump??????
:)
You need CNC
IQ = 24C or 90F
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!
me when your mom
that "IQ = room temp " got me .... Hard
Even better when you notice he is using Celsius.
GOD JESUS TOLD US TO LOVE GOD AND TO LOVE ONE ANOTHER! LET'S NOT DESTROY THIS WORLD! NO WAR!!! БОГ СОЗДАЛ ТАКОЙ ПРЕКРАСНЫЙ МИР! НЕ БУДЕМ РАЗРУШАТЬ МИР! ПОЛЮБИМ БОГА И ВСЕХ ЛЮДЕЙ! НЕТ ВОЙНЕ!!!