Husqvarna 128LD won’t start….Let’s fix it!

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ก.ย. 2024
  • This trimmer was picked up because it doesn’t run and or won’t stay running. Let’s open it up and see what we can find!

ความคิดเห็น • 32

  • @mun33y
    @mun33y 5 หลายเดือนก่อน +7

    This was painful to watch on so many levels

    • @firnatine67
      @firnatine67 หลายเดือนก่อน

      You got that right. Jesus!

  • @williamclements273
    @williamclements273 5 หลายเดือนก่อน +1

    Turn up the idle speed. Stand closer to your microphone.

  • @djancak
    @djancak 4 หลายเดือนก่อน

    i paid extra money to get this string trimmer that would just work only for it to end up being just as big of a pain in the ass as the ryobi after two years. had it working great with a new spark plug just yesterday - two pull start, perfect idle, no stalling on high revs after it warmed up for a minute. today it just doesn't want to start at all. should've just saved a bit more money to get a stihl it seems.

    • @tannersharry
      @tannersharry  4 หลายเดือนก่อน +1

      What fuel are you using?

    • @djancak
      @djancak 4 หลายเดือนก่อน

      @@tannersharry using this VP ProMax 50:1 fuel. think I made a mistake by not just using the Husqvarna brand?

    • @tannersharry
      @tannersharry  4 หลายเดือนก่อน +1

      @@djancak not necessarily but I have seen several of different 2cyl engines not like the canned fuel. Try getting some good synthetic oil and no ethanol fuel and mixing your own. Usually they run like a top. Let me know

  • @SCouch-cw6je
    @SCouch-cw6je ปีที่แล้ว +1

    I’ve never had any luck with husqvarna weed eaters, which is odd cause the red max starts and runs much easier. I hate jerking on something I would’ve slung it after the firsts 50 pulls

    • @tannersharry
      @tannersharry  ปีที่แล้ว

      I hate it too. The carb on this one seemed to be a lot pickier than most. I finally got it where it wanted to be and it runs great now. 🥵

    • @SCouch-cw6je
      @SCouch-cw6je ปีที่แล้ว +2

      @@tannersharry I have done the same. But two weeks later try and start it and back to square one🤷🏻‍♂️

    • @tannersharry
      @tannersharry  ปีที่แล้ว +1

      @@SCouch-cw6je I hope not but if that’s the case then the customer will need a new one. The split on this one has been ran loose for far too long and isn’t worth putting any more money in.

  • @TAR-42
    @TAR-42 3 หลายเดือนก่อน

    Battery is the way. These things will tear your arm apart 🤣😂

    • @tannersharry
      @tannersharry  3 หลายเดือนก่อน +1

      If they aren’t 100% happy yes they will make you consider storing it in the dumpster lol

  • @SpruceGoose-qx8zj
    @SpruceGoose-qx8zj ปีที่แล้ว +2

    Well she sure was stubborn.

    • @tannersharry
      @tannersharry  ปีที่แล้ว +1

      Certainly was. One of the most stubborn trimmers I’ve worked on so far!

  • @keithsimpson1268
    @keithsimpson1268 ปีที่แล้ว +1

    come on you can do it tanner

    • @tannersharry
      @tannersharry  ปีที่แล้ว +1

      Oh I got it running good Keith lol

  • @wsmaga
    @wsmaga 10 หลายเดือนก่อน

    Very cool video. About time someone shows a real video on these husky string trimmers. Mine is acting like this. I bought a new carb after watching someone’s video. That didn’t help. I going to try the original carb, and try to tune it like in this video. If that doesn’t work, it’s going in the trash. I’m tried of pulling the start string for nothing. It’ll idle but didn’t like any throttle.

    • @tannersharry
      @tannersharry  10 หลายเดือนก่อน +1

      If it’ll idle it’s generally just so simple tuning. Thank you for watching! Let me know how f you get it going

    • @wsmaga
      @wsmaga 10 หลายเดือนก่อน +1

      @@tannersharrynothing worked, I spent over an hour trying to get it to run and throttle up. I took it to the repair shop.

    • @tannersharry
      @tannersharry  10 หลายเดือนก่อน +1

      @@wsmaga unfortunately it sounds like it could be crank seals. Let me know what the shop says if you don’t mind

    • @wsmaga
      @wsmaga 10 หลายเดือนก่อน +1

      @@tannersharryoh wow, time for a new one if it’s the crank seal.

    • @tannersharry
      @tannersharry  10 หลายเดือนก่อน +1

      @@wsmaga they are pretty easy to replace. Probably $20 in parts and an hour labor

  • @project2star492
    @project2star492 10 หลายเดือนก่อน

    💪🏼🙏🏻

  • @firnatine67
    @firnatine67 หลายเดือนก่อน

    Huh???

  • @andrewhondo
    @andrewhondo 3 หลายเดือนก่อน

    wtf they didn't have a air filter that messed up that carb be gummed up with out one drawling dust dirt and every thing else in it

    • @tannersharry
      @tannersharry  3 หลายเดือนก่อน

      Yes unfortunately I see this on an almost daily basis. It’s crazy how many ignorant people are allowed to run anything with engines.

  • @sunflowermahea225
    @sunflowermahea225 11 หลายเดือนก่อน

    Hows the filter in the tank

    • @tannersharry
      @tannersharry  11 หลายเดือนก่อน

      The filter in the tank was good