@@justinlee-lc6ypI saw this video from Ents channel, I think if we snap and solder the legs like its described here it can be possible. What do you think? th-cam.com/video/zc6VthQiELU/w-d-xo.html
У Kailh Silent есть тактильные ощущения от нажатия, в отличие от этих Huano Silent, поэтому Kailh Silent будет хоть и немного, но слышно. Также Huano Silent нужно удерживать до упора при выделении текста, иначе кнопка не будет считывать нажатие.
@@justinlee-lc6yp «Kailh Silent» обладает тактильной отдачей, которая ощущается как удар в палец. Это создает характерный звук. «Huano Silent» не обладает тактильной отдачей. Для выделения текста «Huano Silent» необходимо удерживать клавишу практически до упора, иначе нажатие прекратится. Из-за этого «Huano Silent» я не рекомендую использовать для игр.
Greetings, sir. Can you please advise me? I ordered 2 pieces of VXE R1 SE. 1 of them does not work from battery. If you connect the mouse to the usb wire is constantly lit green LED, but should blink red (charging). Also, when disconnected from the wire, the mouse does not respond to switching modes 2.4/BT. I have a feeling that the battery was not connected at the factory, or everything is even worse. What recommendations can you give? Is it possible that they forgot to plug the battery into the connector? 😂 Or it's more likely that the problem is in the hardware? 😢
Hello, thank you for your message. I think it's the motherboard or battery. Batteries are usually new, so I'm more inclined to think it's a motherboard or receiver problem. I suggest you contact after-sales service to solve this problem. Don’t try to repair it yourself, because the new mouse has warranty
Thanks for your comment, the easiest way is to buy the same battery socket, measure the size, and then look for the same size socket. Of course, another method is to cut off the battery wires, then connect them with the same color and insulate them, and then plug them into the mouse motherboard using the original interface.
hello is there any way i can make the pcb hot swappable for other switches? i like the shape of the mouse i just want to experiment with other mouse switches
Hello my friend, i bought one of these R1 SE and the right click is making a squeaking noise, it works but the noise is very irritating, you know how can i fix it? my mouse has less than a week of use and started making this noise
Sir, do you know what the problem is it, i got the vxe r1 se when i use it with dongle, sometimes it flashing green led and the sensor freeze, after the green led is off the sensor work again, and the error still happen when i use dongle connection after many minutes, do you know how to fix it?, thank you sir
Does this problem occur when you use the dongle and mouse receiver at the same time? If you unplug the dongle and only use the mouse receiver, will there be the problem you mentioned?
thanks my goat 谢谢
Very informative. Kudos
Glad to help you
Good video. Thanks for sharing.
Glad to help you
what size jst connection does this have?
Great video. Any ideas on what the side switches are? I was wondering if I can replace them with Huano blue shell pink dot
Thanks for your message. The side switch cannot be replaced because they have curved legs.
@@justinlee-lc6ypI saw this video from Ents channel, I think if we snap and solder the legs like its described here it can be possible. What do you think?
th-cam.com/video/zc6VthQiELU/w-d-xo.html
pls disassembly daxa air II pro wireless.
У Kailh Silent есть тактильные ощущения от нажатия, в отличие от этих Huano Silent, поэтому Kailh Silent будет хоть и немного, но слышно. Также Huano Silent нужно удерживать до упора при выделении текста, иначе кнопка не будет считывать нажатие.
我没太看明白，你是说kailh silent 还是有声音，并不能完全静音？ 选择文本是拖动文本吗？要一直按住按键吗？
@@justinlee-lc6yp «Kailh Silent» обладает тактильной отдачей, которая ощущается как удар в палец. Это создает характерный звук.
«Huano Silent» не обладает тактильной отдачей. Для выделения текста «Huano Silent» необходимо удерживать клавишу практически до упора, иначе нажатие прекратится. Из-за этого «Huano Silent» я не рекомендую использовать для игр.
Greetings, sir. Can you please advise me?
I ordered 2 pieces of VXE R1 SE. 1 of them does not work from battery. If you connect the mouse to the usb wire is constantly lit green LED, but should blink red (charging). Also, when disconnected from the wire, the mouse does not respond to switching modes 2.4/BT.
I have a feeling that the battery was not connected at the factory, or everything is even worse.
What recommendations can you give?
Is it possible that they forgot to plug the battery into the connector? 😂
Or it's more likely that the problem is in the hardware? 😢
Hello, thank you for your message. I think it's the motherboard or battery. Batteries are usually new, so I'm more inclined to think it's a motherboard or receiver problem. I suggest you contact after-sales service to solve this problem. Don’t try to repair it yourself, because the new mouse has warranty
hello sir, i want to ask can you change the battery for a bigger mAH battery? if yes what lipo battery it uses and what connector is it
Thanks for your comment, the easiest way is to buy the same battery socket, measure the size, and then look for the same size socket. Of course, another method is to cut off the battery wires, then connect them with the same color and insulate them, and then plug them into the mouse motherboard using the original interface.
hello is there any way i can make the pcb hot swappable for other switches? i like the shape of the mouse i just want to experiment with other mouse switches
Thanks for your comment .This mouse can be modified to be hot-swappable, but this is not very simple.
Hey man, how tall is the scroll wheel encoder? I have problem with my scroll wheel
It seems to be 9mm. Take it apart and take a look.
Hello my friend, i bought one of these R1 SE and the right click is making a squeaking noise, it works but the noise is very irritating, you know how can i fix it? my mouse has less than a week of use and started making this noise
Open the mouse to find the location of the abnormal sound. Use Teflon tape to tape abnormal sound enclosures
무음스위치도있나요???
没有静音开关的版本，需要自己去改装静音微动。
Hey, i bought one r1 se and it constantly disconnects while on 2.4 ghz mode, is there anything i can do to fix this?
I suggest you contact after-sales service
what is the name of those silent switches?
HUANO华诺黄点静音微动开关无声三脚鼠标左右键按键力度60-70克，约0.65n左右，寿命2000万以上，手感好，静音效果好.
Sir, do you know what the problem is it, i got the vxe r1 se when i use it with dongle, sometimes it flashing green led and the sensor freeze, after the green led is off the sensor work again, and the error still happen when i use dongle connection after many minutes, do you know how to fix it?, thank you sir
Does this problem occur when you use the dongle and mouse receiver at the same time? If you unplug the dongle and only use the mouse receiver, will there be the problem you mentioned?
Sorry sir, maybe there is a misunderstanding, I mean the 2.4GHz dongle from the mouse, and not another dongle. Maybe it's a production factory defect?
@@stvandw4167 I understand what you mean now. I think it’s also a factory problem.