Hello could I ask a question? I just purchased a similar pair of these, but my inner stop lights won't come on, just the outer. I noticed the LED lights had 5 pins, but the OEM adapter only has 3. It came with these two wires that look like they go into the adapter and plenty of slack. Am I supposed to thread it through the trunk and connect it into the outer stoplight?
Hi, I installed the same set you have. Did long coding take care of hyperflash? My signals are bugging out, I think because of the hyperflash. Did you run into the same problem?
@@koolnick69 great question, it didn't. All of the lights on the exterior blinked at a normal rate however the dash and the inside clicker was faster than normal.
I installed the same set in my 2016 base 1.4T Jetta, I cannot get the sequential turn signals to go, I get the standard blinking, also my rear fog lights will not turn on, I may have the wrong Euro Switch or maybe I wired them wrong, do you have any footage of you wiring your set?
Congratulations I'm your 100th subscriber lol saw it was at 99 so why not make 💯 🤪
HAHAHA thank you!!!
hey i just got the same tail lights you do and was wondering where you got the new harnesses from what what the specs were on that thanks!
Hey sorry for the late response and I made the harness myself! I just plugged wires in random places and it worked funny enough
Where can I find these tail lights??? The link doesn’t have them available.
I would just look up the same name in Ebay. You'll get the same Tail light. I just did it.
Hello could I ask a question? I just purchased a similar pair of these, but my inner stop lights won't come on, just the outer. I noticed the LED lights had 5 pins, but the OEM adapter only has 3. It came with these two wires that look like they go into the adapter and plenty of slack. Am I supposed to thread it through the trunk and connect it into the outer stoplight?
Can you please help me with the turn signals? They only show the side taillights not the ones in the middle
You have to wire them in. You have to run the wire from the outer lights to the trunk lid using the wire diagram I gave
Hi. Did you use load resistors?
You car have rear fog lamp ? If yes how does that work ?
Hi, I installed the same set you have. Did long coding take care of hyperflash? My signals are bugging out, I think because of the hyperflash. Did you run into the same problem?
I did not get that problem, it was pretty plug and play. But I did have to code out the light error in the dash.
Joseph Sookram Hey, thanks for the quick response. Did coding out the bulb error stop the hyper flashing for you?
@@koolnick69 great question, it didn't. All of the lights on the exterior blinked at a normal rate however the dash and the inside clicker was faster than normal.
@@josephsookram3967 how did you code out the error light
eBay link is broken. Can you update it?
I installed the same set in my 2016 base 1.4T Jetta, I cannot get the sequential turn signals to go, I get the standard blinking, also my rear fog lights will not turn on, I may have the wrong Euro Switch or maybe I wired them wrong, do you have any footage of you wiring your set?
Did you ever figure out the rear fog lights?
Have you done wiring on the left side too or just on right?
It's the same thing for the left side as well. You have to run the wiring through the trunk.
You have a link this in EBay?
No I don't sorry
Do you use vcds coding ?
I do not. I just use the obdeleven and long coding. But there is no coding needed for the tail lights they come with the turn light sequence already
Is the price for only one tail light?
Nope the whole set of led tail lights are 350
@@josephsookram3967 Set for one side? Thx for answering.
Do they still work?
They do indeed.
@@josephsookram3967 How long did it take to get to you, they look awesome
@@biblicallyvestigial it took them approximately a week, close to a week and a half.
7/10. Not enough VTOL.