I'm assembling Liberty Engine 2.0, following the step-by-step instructions in the video and information from the group. All assembly followed the same as in the videos, the only modification was in the size of the 220v single-phase asynchronous motor, which has 2HP and not 3/4HP like the one in the video. The 50/60Hz 220v microwave transformer, connecting the motor directly to common power, and measuring this transformer connected in parallel like the video, only reaches 7V, shouldn't it reach 220V? Is this correct?
I used marine aluminum for the rotor alloy, which would be a mix of aluminum and silver, checking the video you recommended to others in the group. The weight of my rotor is 3.1kg, is it correct from the video that it will be 7.6kg?
В какую стоимость такой генератор обойдётся? Можно у вас заказать в разобраном состоянии, на основные части, но в дополнение +инструкция по сборке и эксплуатации? Заранее благодарю!
@@thelibertyengineproject7966 oh no, this will be a very big problem. I was hoping to reuse the element to try to correct it but this will cost a lot a money on trial and error.
I'm sorry. Everything we can say about this alloy, we have already said in the videos. We can't say more... But soon we will be raffling off a Liberty Engine 2.0 prototype. If you participate and are lucky you can win
Hola, primero: Muchas Gracias por su aporte!! Quiero consultarles: cuanto tiempo puede funcionar sin detener? se podía alimentar una casa de campo con éste dispositivo? durante cuántas horas al día?
Puede estar en marcha indefinidamente. Sólo la paramos cada 3 meses para cambiar los rodamientos del motor y revisar el apriete de las conexiones eléctricas
Hola a todos los miembros de este grupo "Proyecto Liberty Engine". En este momento que he tomado para escribir este mensaje 02:48 pm, hora en la Republica Dominicana, me detuve para ver cuantos suscritos tenia la pagina 119,000; solo imaginense ustedes los miembros que hemos pagado para ver el diseño y no tener la oportunidad de poder hacerlo uno, claro esta el que pueda, porque no todos lo harian, pero calculen, como es mi caso yo pague la cantida minima de US$ 1.99, si todos aqui pagamos esa misma cantidad minima y lo multiplica por los suscritos hasta el momento del mensaje, a mi me da , no se a otros la suma de US$ 236,000.00 dolares ese dinero es mensual. entoces, no es verdad que van a revelar la parte tecnica de construccion y dejar de percibir ese dinero mensual.
Hola amigo, en todo momento decimos que no podemos desvelar la aleación secreta del rotor. Nuestra intención es motivar a la gente para que investigue y consiga un prototipo que funcione como el nuestro. Hemos demostrado que es posible. En ningún momento engañamos a la gente. Por otro lado, una cosa son los suscriptores y otra cosa son los miembros del canal. Suscriptores a nuestro canal hay 119.000, pero esos no pagan por suscribirse. En cambio hay sólo 248 miembros del canal que nos apoyan con sus suscripciones. Tenga en cuenta que no obtenemos beneficio con estos videos, ya que aportamos mucho más tiempo y dinero para mostrar la verdad al mundo de lo que obtenemos como beneficios de TH-cam
I think I understood how the science behind the generator works, I even found the alloy you use in a materials database. The problem is that I can't find any company that wants to manufacture this alloy for me. Can you give me some clue on how to get them to make it for me? Thank you very much
Could you provide more detailed specifications for the magnets, such as their strength and dimensions? Also, note that it is not a single, uniform magnet but rather assembled as two packs of three pieces each. If you want, I can write in another language since I already translate what I write through ChatGPT.
Whats the purpose of this video? If you are unwilling to sell manufactured units or explain the necessary details so it can be replicated, then this videos only purpose is to generate income via views. Please put up or shut up.
It doesn't matter what kind of microwave transformer you use. It's because the output is not 220v. It's a video that contains lies Based on the video, the reproduction result is 30~40v, which is proportional to the number of rotations
Ce am văzut în calitate de membru nu a schimbat părerea mea aștepți prea multe vizualizări și membri faci și dă-o mai departe ca asa e bine dacă e funcțională ca oricum își pers foarte mulți încrederea succes 😌
Would it be possible to map out the propagation of the magnetic fields on this device to explain how it's generating power. A magnetic field diagram would be helpful to explain that this idea actually functions without added external man made energy before individuals attempt to reproduce this device without knowing the complete theory of operation. Maybe add some testimonial video links of other people successfully reproducing your design.
@@thelibertyengineproject7966 why do you want this technology t be known by the rest of the world, if you keep secret the most important part of the invention????????if you hide informations , and no one is able to reproduce what you found, then it is usless to the world ....
This is nice information and planing but for someone to build one needs a starting point with the alloy used not the full recipe but just a starting point
Soy digamos conocedor de la materia y con carrera en la materia eléctrica. Díganos que me llamó la atención tu proyecto y doy gracias a Dios por tu exponencia . En estos casos el imperio de el mundo industrializado no desea esto que se de a conocer a la opinión pública mundial . Yo hace como 15 años presente un proyecto similar en la universidad con un alternador de auto de 24v. Y expusimos un mega proyecto para convertir la basura clasificada de materiales orgánica y no orgánico. Y los materiales renovables y no renovables. En energía eléctrica. Y jamás dieron respuesta los gobiernos de tal proyecto . Sólo deseo que . Sigas así exponiendo tus buenas forma para cambiar el planeta y la mente de quienes lo dominan
🎯 Key Takeaways for quick navigation: - Section key takeaway: Herstellung des Magnetrotors aus einer speziellen Legierung von Silber und Aluminium, hauptsächlich N52 Neodymium-Magneten. - Bullet Points: - Section key takeaway: Montage des Motors zwischen den vier Spulen. - Bullet Points: - Section key takeaway: Funktionsprüfung des Motors mit einer Glühbirne. - Bullet Points: - Section key takeaway: Durchführung eines Leistungstests im Freien. - Bullet Points: Made with HARPA AI
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead? Another question is how does the weight of the rotor influence its operation? Should it reach close to 7.6kg with 7073.3cm³?
Hello sir, your cartoon is really great. I had a request from you. Is it possible for you to provide me with the complete dimensions and size of the generator? 🙏🙏🙏
kesinlikle mükemmel bir proje, elektrikli araçları şarj etmek için kullanılabilir. sınırsız menzil ve ücretsiz. dc şarj ünitesine dönüştürüp bir elektrikli aracı şarj etmeni sabırla bekliyorum, sanırım kapitalist devletler ve enerji devleri bunu istemeyecek.
Gente, não tentem comprar o gerador ou pedir projeto, façam conforme está sendo ensinado. Já não morreram bastantes pessoas por causa de seus inventos? Está tudo aí, bem explicado, agora vamos trabalhar.
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead?
I'm sorry friend. As we have already said in our videos, we cannot say more information about this material. We have a lawsuit pending for having talked too much
@LibertyEngine There is a $20,000 dollar drone that can lift a human being. How about an Acrylic see thru Box in the Bottom, connect the generator to the bottom, feed the motors, and make it hover LIVE! for 1 month on TH-cam Live, TikTok, Twitter. No heavier than air vehicle has ever done that. Why not shock the system?
@@thelibertyengineproject7966 All I am suggesting is to “Show the truth to the World..” Perhaps in a flashier more hyped way that masses of people can understand. I am an engineer. I understand generators, thermodynamics. People look at this generator and their response will be “can I get it on Amazon?” They will not realize this is a New World. A new civilization. A new future. Remember, putting water On the motorcycle and driving away? Something like that. If you got the sense that I need to see this for myself you are missing the point. Its not about me, it is about moving this discovery forward..:)
How much does it cost to build a generator like this and ship it to me? I want you to build me one - maybe more - and I will pay for the cost and shipping too; is that possible please?
Sorry for the law suit pending, I’ve done more research and the alloy is very similar to AlNiCo-Ag. There is a more complex mixer Aluminium Silicon Sulphur Neodymium Titanium Iron Hafnium Lanthanum Zircanium Cobalt
i found a way how to make this rly work..... bit more komplex and no motor... what uses the generated energy to keep spinning and not giving any electricity at all.... cant get more out of a motor than it can handle...
I need to ask, why am I paying to join for extra videos if I'm still not being given 100% of the information to build a working unit? Where can I get parts? Why can't the composite materials be acquired? After all, you acquired the parts from somewhere. I see people trying to build this and none are successful.
At all times we say that we cannot give more information about this secret material, not even to the members of the channel. We have manufactured this secret material ourselves
Why are you not publishing anymously all mechanical blueprint drawings and electrical drawings open source to the World ? It is doable with some precautions to avoid being caught. This will change everything if it's true. The aluminum/silver alloy core seems to be the heart of everything according to what I've seen... what is the composition ? Motor seems to be a 3/4 HP, 2780 RPM 1 phase.
20kva is not possible, the generating motor would need to be 10 times bigger for singe phase, plus there is no speed regulator which you would need as magnets let loose in the right configuration will run at speeds of 14000rpm which not motor/generator can handle.. so unless they have made a mistake and mean 2kva max this cannot be right..
Tengo muchas dudas, conseguì hacer un motor con eficencia de 1.2, quiere decir che en direct drive y un motor de 1kw con eficenzia del 90% puedo sacar mas o menos 100W, ustedes sacan 20.000W con un motor de maximo 2kw, seria una eficencia del generador sobre 20. Por la fisica ya no seria posible un motor 1.2... 20 seria un milagro de la tecnica. Ustedes sacan partes de otros aparatos en manera casi casual y llegan a 20x? Y con el viejo projecto con el alternador del coche modificado llegan a 10x???? Este video no explica nada de tecnico sobre el funcionamiento, solo mecanica basica. Es evidente que todo esto no és reàl. Si tienen pruebas tomo un aviòn y llego a verlo en un par de dìas.
I examined each frame in detail starting at 5 seconds before to 5 seconds after the time hack mentioned in your comment and cannot see a cable (of any color) in the leaves, can you please be more specific as to exactly where you see a cable?
On the one hand, your goal of publications is unclear, the first one is logical and easy to read - just attracting subscribers and views for monetization. Is there another one? Well, you are trying to convince all viewers that you have invented a perpetual motion machine and use video pictures that in no way can be considered proof, it is just a trick of illusionists. You hint at a special alloy that is in itself a "philosopher's stone", but this is naive and calculated for children's perception. Is it really the first goal that is your motivation?
Hice la misma máquina paso a paso milímetros a milímetros mismo motor misma polea mismo armazón centímetros a centímetro y no funciona los imanes correctamente instalado, es una Perdida de tiempo y dinero para aquel que tenga que comprar materiales.
@@thelibertyengineproject7966yo hice lo mismo con el rotor de aluminio y no funciona!! Lo que después de 3 años aprox no entiendo porque pollas no ponéis eso en venta,si no os atrevéis hay muchísima gente que si. (Por eso ya no confío en esto)Un saludo.
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead?
I'm sorry friend. As we have already said in our videos, we cannot say more information about this material. We have a lawsuit pending for having talked too much
¡Gracias!
Thanks for your support friend
😂😂😂
I'm assembling Liberty Engine 2.0, following the step-by-step instructions in the video and information from the group. All assembly followed the same as in the videos, the only modification was in the size of the 220v single-phase asynchronous motor, which has 2HP and not 3/4HP like the one in the video. The 50/60Hz 220v microwave transformer, connecting the motor directly to common power, and measuring this transformer connected in parallel like the video, only reaches 7V, shouldn't it reach 220V? Is this correct?
Most important of all is the rotor alloy
I used marine aluminum for the rotor alloy, which would be a mix of aluminum and silver, checking the video you recommended to others in the group. The weight of my rotor is 3.1kg, is it correct from the video that it will be 7.6kg?
@@opoderdasaude you fool 😂 u r so easily scamed
Tests results so far grade awesome
Thanks!!!
when can we see a site to sell the parts for this and DIY assembly instructions?
В какую стоимость такой генератор обойдётся?
Можно у вас заказать в разобраном состоянии, на основные части, но в дополнение +инструкция по сборке и эксплуатации?
Заранее благодарю!
Question, when it took you 25x to make the alloy, did you have to start a new batch every time?
Yes
@@thelibertyengineproject7966 oh no, this will be a very big problem. I was hoping to reuse the element to try to correct it but this will cost a lot a money on trial and error.
@@McFlysGaming😂 you fool. Grow up and stop falling for scams
Severek izliyorum Sevgi ve saygı ile kolay gelsin
😂😂😂
Hello, can do you inform me, whats is the alloy rotor porcentage in silver and aluminum?
All the clues we can say about that are in this video: th-cam.com/video/wc-YYToexDI/w-d-xo.html
Would you welcome independent testing?
Gosto muito do seu trabalho parabéns
Well done 👍
Can you tell me percentage of silver to aluminum please?
And the cost of this alloy please ?
Kind regards
I'm sorry. Everything we can say about this alloy, we have already said in the videos. We can't say more... But soon we will be raffling off a Liberty Engine 2.0 prototype. If you participate and are lucky you can win
😂
Hola, primero: Muchas Gracias por su aporte!! Quiero consultarles: cuanto tiempo puede funcionar sin detener? se podía alimentar una casa de campo con éste dispositivo? durante cuántas horas al día?
Es energía infinita
Puede estar en marcha indefinidamente. Sólo la paramos cada 3 meses para cambiar los rodamientos del motor y revisar el apriete de las conexiones eléctricas
Se servira o no pa casa campo
@@thelibertyengineproject7966 que potencia le extraes?
wonderfull video thanks
Hola a todos los miembros de este grupo "Proyecto Liberty Engine".
En este momento que he tomado para escribir este mensaje 02:48 pm, hora en la Republica Dominicana, me detuve para ver cuantos suscritos tenia la pagina 119,000; solo imaginense ustedes los miembros que hemos pagado para ver el diseño y no tener la oportunidad de poder hacerlo uno, claro esta el que pueda, porque no todos lo harian, pero calculen, como es mi caso yo pague la cantida minima de US$ 1.99, si todos aqui pagamos esa misma cantidad minima y lo multiplica por los suscritos hasta el momento del mensaje, a mi me da , no se a otros la suma de US$ 236,000.00 dolares ese dinero es mensual. entoces, no es verdad que van a revelar la parte tecnica de construccion y dejar de percibir ese dinero mensual.
Hola amigo, en todo momento decimos que no podemos desvelar la aleación secreta del rotor. Nuestra intención es motivar a la gente para que investigue y consiga un prototipo que funcione como el nuestro. Hemos demostrado que es posible. En ningún momento engañamos a la gente. Por otro lado, una cosa son los suscriptores y otra cosa son los miembros del canal. Suscriptores a nuestro canal hay 119.000, pero esos no pagan por suscribirse. En cambio hay sólo 248 miembros del canal que nos apoyan con sus suscripciones. Tenga en cuenta que no obtenemos beneficio con estos videos, ya que aportamos mucho más tiempo y dinero para mostrar la verdad al mundo de lo que obtenemos como beneficios de TH-cam
That is true
Can members buy one an engine from you???
A los interesados comprar el sistema.
Como?@@edwinri
I think I understood how the science behind the generator works, I even found the alloy you use in a materials database. The problem is that I can't find any company that wants to manufacture this alloy for me. Can you give me some clue on how to get them to make it for me? Thank you very much
Unfortunately, everything is achieved with money in this world.
😂 you fool, so easy to get scamed
hola,como estan?como serua la secuencia de conexxion de las bobinas con la bornera?no se ve en el video,grcias
En el próximo video
si te fijas, las bobinas estan conectadas en paralelo, las nortes y sur y de un par de ellas, esta conectado el motor.
@@thelibertyengineproject7966 hola ,es posible hacer el rotor completamente de resina epoxi?gracias
Why is this mix between the silver and aluminium % for the rotor such a secret?
Its made of 20% S, 35% C, 40% A and 5% M
Could you provide more detailed specifications for the magnets, such as their strength and dimensions? Also, note that it is not a single, uniform magnet but rather assembled as two packs of three pieces each.
If you want, I can write in another language since I already translate what I write through ChatGPT.
Whats the purpose of this video? If you are unwilling to sell manufactured units or explain the necessary details so it can be replicated, then this videos only purpose is to generate income via views. Please put up or shut up.
Does it matter what sort of microwave transformer I use? I'm finding it difficult to find a 6170w1d020f transformer.
It doesn't matter what kind of microwave transformer you use.
It's because the output is not 220v.
It's a video that contains lies
Based on the video, the reproduction result is 30~40v, which is proportional to the number of rotations
That doesn't matter too much. The important thing is that they have the same power
How do you connect the 4 windings to the motor?
La conexión de los polos de los microondas van en serie y al final dependiendo de la cantidad que desees poner
Great video ❤❤
Ce am văzut în calitate de membru nu a schimbat părerea mea aștepți prea multe vizualizări și membri faci și dă-o mai departe ca asa e bine dacă e funcțională ca oricum își pers foarte mulți încrederea succes 😌
În următorul videoclip vom pune planuri cu măsurători, dar nu putem spune aliajul exact al rotorului
@@thelibertyengineproject7966 gehen auch andere Legierungen , der Rotor sollte nicht magnetisch sein?
Handles varying loads very well
yess
Would it be possible to map out the propagation of the magnetic fields on this device to explain how it's generating power. A magnetic field diagram would be helpful to explain that this idea actually functions without added external man made energy before individuals attempt to reproduce this device without knowing the complete theory of operation. Maybe add some testimonial video links of other people successfully reproducing your design.
😂😂😂 good one
What is the composition of the core?
How much is the percentage of aluminum?
What is the percentage of silver?
How many cores weigh?
We cannot tell the exact alloy of the rotor. In the next video we will say the weight of the rotor
@@thelibertyengineproject7966 why do you want this technology t be known by the rest of the world, if you keep secret the most important part of the invention????????if you hide informations , and no one is able to reproduce what you found, then it is usless to the world ....
Is the rotor ingredients complex or easy to make?
Very Easy. But stay tuned because very soon we will be raffling off a Liberty Engine 2.0 prototype
@@thelibertyengineproject7966perfect, let me eliminate a few elements so that the filler can be reconfigured.
@McFlysGaming 😂
This is nice information and planing but for someone to build one needs a starting point with the alloy used not the full recipe but just a starting point
We have already said the starting point. we can't say more
Hi I need to know about this rotor there is a special mix of this aluminium aloy?
Soy digamos conocedor de la materia y con carrera en la materia eléctrica. Díganos que me llamó la atención tu proyecto y doy gracias a Dios por tu exponencia . En estos casos el imperio de el mundo industrializado no desea esto que se de a conocer a la opinión pública mundial . Yo hace como 15 años presente un proyecto similar en la universidad con un alternador de auto de 24v. Y expusimos un mega proyecto para convertir la basura clasificada de materiales orgánica y no orgánico. Y los materiales renovables y no renovables. En energía eléctrica. Y jamás dieron respuesta los gobiernos de tal proyecto . Sólo deseo que . Sigas así exponiendo tus buenas forma para cambiar el planeta y la mente de quienes lo dominan
🎯 Key Takeaways for quick navigation:
- Section key takeaway: Herstellung des Magnetrotors aus einer speziellen Legierung von Silber und Aluminium, hauptsächlich N52 Neodymium-Magneten.
- Bullet Points:
- Section key takeaway: Montage des Motors zwischen den vier Spulen.
- Bullet Points:
- Section key takeaway: Funktionsprüfung des Motors mit einer Glühbirne.
- Bullet Points:
- Section key takeaway: Durchführung eines Leistungstests im Freien.
- Bullet Points:
Made with HARPA AI
Thanks
😂 fool
think of the power output, 20000W, if output 220V, up to 100A, how the tiny coils/wires could stand 100A without heat sink?
¿A cuantos Herz funciona el Generador? ¿Se han hecho pruebas en 220v con un Calentador, Estufa?
Funciona a 50Hz. Entra en nuestro canal y mira el vídeo con las pruebas que hicimos en las que conectamos 4 calentadores de 3Kw
No lo hagas es una perdida de tiempo y dinero, NO funciona
Donde comprar imanes oscilante ? amazon no tiene. Gracias
No los vas a encontrar a la venta. Todavía son prototipos experimentales
hebat penemuan yang orijinal 👍👍👍mr. Liberty
😂
Eu gostaria de saber se as tomadas em todos os filtros de linha são 220 volts?
Sim. Todas as tomadas são 220v
Especially the input for sure
How can I reach this invention project you have made? I am writing from Turkey. I love all these things.
Thank you very much for your support
I cant wait to see how this does for poering an entire house through the 50 amp service breaker box
We cannot do all the tests that are asked of us
Excellent 👍👍👍 J'essais d'en faire un 😃
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead?
Another question is how does the weight of the rotor influence its operation? Should it reach close to 7.6kg with 7073.3cm³?
The weight does not affect its operation. We have said the weight so that you can investigate until you find this metal
Hola! El rotor tiene que ser aluminio y plata o puede ser solamente aluminio?
Si fuera tan fácil nosotros no lo habríamos complicado añadiendo plata a la aleación
Try an alloy made of S, C, A and M
Hello sir, your cartoon is really great. I had a request from you. Is it possible for you to provide me with the complete dimensions and size of the generator? 🙏🙏🙏
It Seems tô be good
Hi,is it possible to buy a finnished Product from you ?
We cannot sell our prototypes
I love it!!!
Thanks!
The video is deleted, can you describe what did you see?
Pozdrowienia z Polski (-; Dziękuję.
Dziękuję
O polska też się tym interesuje to jest nas wiecej
@@freex999so many fools in poland? Lol
Olá bom dia eu gostaria de saber qual o motor elétrico que eu posso utilizar para gerar uma potência de 20000w??
Serve um motor de 3/4 HP
Hola, cual es el diámetro del rotor, gracias
Tienes todas las medidas en el último video de nuestro canal
kesinlikle mükemmel bir proje, elektrikli araçları şarj etmek için kullanılabilir. sınırsız menzil ve ücretsiz. dc şarj ünitesine dönüştürüp bir elektrikli aracı şarj etmeni sabırla bekliyorum, sanırım kapitalist devletler ve enerji devleri bunu istemeyecek.
Thanks!!!
Why wouldn t they want it? Scams are already everywhere. Whats the problem with this one?
in qualche modo puoi aiutarci a conoscere la lega del rotore?
Abbiamo fornito tutti gli indizi possibili nel nostro ultimo video
Obviamente el motor tiene cambios . Presumo es trifasico y lo modifico internamente
❤❤❤❤❤❤❤❤
😂😂😂
can I buy this ?
I want use it when our power is cut off
Gente, não tentem comprar o gerador ou pedir projeto, façam conforme está sendo ensinado. Já não morreram bastantes pessoas por causa de seus inventos? Está tudo aí, bem explicado, agora vamos trabalhar.
Is there anyway that you can give a parts list?
BTW love your content!
All the parts we used appear in the video
😂 fool
👍👍👍
😂
Are the blueprints available?
The blueprint of this machine appears during the video
😂 yes, in fairytale land
O rotor pode ser feito em alumínio?
No, must be made of S, C, A and M
Est-ce que c'est possible de ce procurer ce que tu fabrique ?
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead?
I'm sorry friend. As we have already said in our videos, we cannot say more information about this material. We have a lawsuit pending for having talked too much
@LibertyEngine There is a $20,000 dollar drone that can lift a human being. How about an Acrylic see thru Box in the Bottom, connect the generator to the bottom, feed the motors, and make it hover LIVE! for 1 month on TH-cam Live, TikTok, Twitter.
No heavier than air vehicle has ever done that. Why not shock the system?
We don't need to do that test to convince anyone. Each person can believe what they want. We just want to show the truth to the world
@@thelibertyengineproject7966 All I am suggesting is to “Show the truth to the World..”
Perhaps in a flashier more hyped way that masses of people can understand. I am an engineer. I understand generators, thermodynamics. People look at this generator and their response will be “can I get it on Amazon?”
They will not realize this is a New World. A new civilization. A new future.
Remember, putting water
On the motorcycle and driving away? Something like that.
If you got the sense that I need to see this for myself you are missing the point. Its not about me, it is about moving this discovery forward..:)
@@pedrosura 😅 good attempt, but you know they wont because they want the views
@ If they want view the could get Bad Bunny to make a video. This looks like to much effort
@@pedrosura omg, fool, grow up
How much does it cost to build a generator like this and ship it to me?
I want you to build me one - maybe more - and I will pay for the cost and shipping too; is that possible please?
Sorry for the law suit pending, I’ve done more research and the alloy is very similar to AlNiCo-Ag. There is a more complex mixer
Aluminium
Silicon
Sulphur
Neodymium
Titanium
Iron
Hafnium
Lanthanum
Zircanium
Cobalt
Sorry, but we can't say more about this alloy
Its a mixture of S, C, A and M
i found a way how to make this rly work..... bit more komplex and no motor... what uses the generated energy to keep spinning and not giving any electricity at all.... cant get more out of a motor than it can handle...
I need to ask, why am I paying to join for extra videos if I'm still not being given 100% of the information to build a working unit? Where can I get parts? Why can't the composite materials be acquired? After all, you acquired the parts from somewhere. I see people trying to build this and none are successful.
At all times we say that we cannot give more information about this secret material, not even to the members of the channel. We have manufactured this secret material ourselves
Welchen Motor habt ihr da genommen die marke
If it worked they would be selling the parts at least.
But it doesn t, easy
Сам ротор обовязково має бути з домішками срібла з одног алюмінію можна зробити?
No, you need to mix S, C, A and M
Why are you not publishing anymously all mechanical blueprint drawings and electrical drawings open source to the World ? It is doable with some precautions to avoid being caught. This will change everything if it's true.
The aluminum/silver alloy core seems to be the heart of everything according to what I've seen... what is the composition ?
Motor seems to be a 3/4 HP, 2780 RPM 1 phase.
Is there a specific diameter for the rotor? And the magnets too?
In the next video we will give plans with measurements
@@thelibertyengineproject7966 cuando subiran el proximo video?
20kva is not possible, the generating motor would need to be 10 times bigger for singe phase, plus there is no speed regulator which you would need as magnets let loose in the right configuration will run at speeds of 14000rpm which not motor/generator can handle.. so unless they have made a mistake and mean 2kva max this cannot be right..
it's right
😂😂😂
Ok, there is the guy named Jean-Claude Cordier. I’m I cold, hot or I’m on fire, someone put me out😉. If you can, reply with an emoji
😉
покажи с помощью спектрометра металлов и сплавов что твое ноу хау это сплав Al Ag
The real test for varying loads on this liberty engine will be hooking into a house
We have already made a video connecting our Liberty Engine with 12kw power: th-cam.com/video/OkXGXKgqr2g/w-d-xo.html
Так вот какая она коробочка Теслы :)
hoe veel procent zilver is in de aluminium toe gevoegd
We hebben in onze video's veel feiten over deze speciale legering verteld, maar we kunnen het percentage metalen in de legering niet vertellen
Perfekte Idee
Induction Cooker ❤❤ Free Wireless Ernegy Generator please 😊😊😊😊😊😊😊🎉🎉😢😢😢😢😢
Tengo muchas dudas, conseguì hacer un motor con eficencia de 1.2, quiere decir che en direct drive y un motor de 1kw con eficenzia del 90% puedo sacar mas o menos 100W, ustedes sacan 20.000W con un motor de maximo 2kw, seria una eficencia del generador sobre 20. Por la fisica ya no seria posible un motor 1.2... 20 seria un milagro de la tecnica. Ustedes sacan partes de otros aparatos en manera casi casual y llegan a 20x? Y con el viejo projecto con el alternador del coche modificado llegan a 10x???? Este video no explica nada de tecnico sobre el funcionamiento, solo mecanica basica. Es evidente que todo esto no és reàl. Si tienen pruebas tomo un aviòn y llego a verlo en un par de dìas.
Es real
Я хочу приобрести этот генератор как это сделать
Это скам и байт на просмотры
本当かどうかは製作すればわかる。 私は見よう見まねで製作してみる。 ある程度の電気知識があれば製作可能でしょ。
とても良い
why can't you tell me the cost of manufacturing the rotor? It won't infringe patent law!
It is prohibited to sell the rotor material
Продавайте генераторы через интернет патент вы вряд-ли получите. Скорее всего ящик
How long the magnets last? What’s the cable coming under the leaves at 1.26.05
I examined each frame in detail starting at 5 seconds before to 5 seconds after the time hack mentioned in your comment and cannot see a cable (of any color) in the leaves, can you please be more specific as to exactly where you see a cable?
это не кабель это синий цвет отсвечивает по раме.
Crei que dirias las medidas
Por las puras me he suscrito creo
😢
Hay otro video donde damos las medidas
Mi spedisci il generatore?
On the one hand, your goal of publications is unclear, the first one is logical and easy to read - just attracting subscribers and views for monetization. Is there another one? Well, you are trying to convince all viewers that you have invented a perpetual motion machine and use video pictures that in no way can be considered proof, it is just a trick of illusionists. You hint at a special alloy that is in itself a "philosopher's stone", but this is naive and calculated for children's perception. Is it really the first goal that is your motivation?
何故、販売しない。
何ヶ月持つのか?
1. Doesn t sell because doesn t work.
2. Lasts 0 sekonds, because its nonsense
Al+Ag
No, S, C, A and M
Hice la misma máquina paso a paso milímetros a milímetros mismo motor misma polea mismo armazón centímetros a centímetro y no funciona los imanes correctamente instalado, es una Perdida de tiempo y dinero para aquel que tenga que comprar materiales.
El secreto está en la aleación del rotor. Si no es el metal correcto no va a funcionar nunca
@@thelibertyengineproject7966peki nasıl rotor yapacağız yada yapdıravagız nasıl metal kullanıyorsunuz alaşımlı olması için 😢
@@thelibertyengineproject7966 How heavy is the rotor?

@@thelibertyengineproject7966yo hice lo mismo con el rotor de aluminio y no funciona!! Lo que después de 3 años aprox no entiendo porque pollas no ponéis eso en venta,si no os atrevéis hay muchísima gente que si. (Por eso ya no confío en esto)Un saludo.
@@dunyaislambirligiworldisla3727nunca contesta a seseo
he's a liar he just wants to make videos making people believe he has the magic recipe 🤮
Views = money
Секрет графен
😂 i thought its S, C, A and M 😅
nobody has built one
We already know that you cannot share the rotor manufacturing formula, in which case you could inform us whether the materials used to manufacture the rotor are not attracted to magnets. Examples: Silver and aluminum which are mentioned in the video you made available, mercury, gold, bismuth and lead?
I'm sorry friend. As we have already said in our videos, we cannot say more information about this material. We have a lawsuit pending for having talked too much
They don't want to share fir the All the Good for Humanity... No reason to support this channel...
@@thelibertyengineproject7966 😂 Sure 😂
Its made of S, C, A and M
👍👏