Learn to (MIG Weld) in A DAY pt.1 (How to Run A Bead)!!!
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- This video is going to be a series to learn how to MIG weld in a day. I'm trying to come up with a formula to help you guys learn faster and better. If you have any suggestions that may help, let me know. Below is a list of products that was used in this video if you are interested. These links are from my amazon affiliate account, I make a small percentage off of qualified purchases at no additional cost to you. Its just a way for you to support my channel and get cool tools!!! Also if you want to show your support you can head over to my website and scoop you up one of my AC Designs Garage t-shirts.
My website for t-shirts: www.acdesignsgarage.com
My PO Box: PO Box 782 Troutman NC 28166
Mig Welder Im using in video Link and coupon code below.
COUPON CODE For ARCCAPTAIN: AC DESIGNS
ArcCaptain Mig 200 link www.arccaptain...
ArcCaptain Coupon Code AC Designs
Tools Links BELOW
MIG Pliers amzn.to/3TGaE1i
Mechanix Fab gloves amzn.to/3tzwxVq
Defiant Welding Gloves amzn.to/3NP79lt
IR Grinder amzn.to/3NMyUep
3m ROLOC Grinding disc amzn.to/48yKZMq
Dewalt Electric grinder amzn.to/48v289u
4.5 inch grinding flap wheel amzn.to/3vcbf0u
music used is from www.epidemicsound.com
Love drag racing !! I usually don't go for idols, but you got to admit John Force is the GOAT.
I 100% agree!!!!
Trying to find a good video on just basic welding is hard. That video was great, and it was to the point with the seven steps that you do. Thank you
Awesome thank you very much!!!
Great video!!! Nice reminder to me to "RELAX" while I'm making passes.... I tend to hold my breath and lock up.... it's a thing!
Thanks Kevin!! It taken me a while to learn to Relax and breath lol, where I'm still bad at not breathing , When I pinstripe I still about pass out and Ive been doin that for years lol
Awesome video brother, trucks looking good also.
-Spanky
Thanks brother hope to get back on it soon!!!
I am not a professional but I like your sawtooth technique when I glue stuff together. Particularly when the metals are different thickness so you can put more heat on the thicker side. I have a Millermatic 230 but that Arccaptain is pretty impressive. I learned how to patch up tobacco crates with an old stick welder. We used to only have one kind and size of rod that we welded everything with. I was amazed when I grew up and found all the types and sizes of welding rods available. The small rods made welding the thin sheets so easy without blowing through. Then I got a MIG and it made everything easy. Great video!
Awesome thank you, I've been welding for 28 years with a millermatic 185, then arccaptin sent this machine to me and i was super impressed for the money!!! Im like you I learned on stick welding then discovered mig andI was hooked!!! Thanks for watching 👍
Great tutorial. Finally at the point in life I have time to learn some new things and welding has always been on the top of my list. Going to take those 7 steps and start practicing this weekend.
Awesome, good luck. Thanks for watching!
I absolutely want to learn all the way up. Looking forward to the new journey in 2024. Happy new year and God bless you.
Awesome thank you for the support God Bless!!!!!!
Enjoying the series 👍
Thank you for watching!!!
👍… and have a happy new year🎉🎉🎉
Thank you brother, You have a Blessed NewYear!!!!
Thanks for taking the time to document and share your expertise. Came across your channel searching youtube university for some helpful vids and this content is exactly what I am looking for. Liked. Subbed. And expect some comments to hopefully drive up that search algorithm. Many thanks and keep the basics coming. i hope to be mig stacking dimes in a few months with enough practice. Thanks for the help getting started.
Thank you for supporting the channel it's greatly appreciated!!!!
Good stuff A/C I’m welding half decent through watching your vids. Well done, keep it up!!!!
Thank you very much and thanks for the support!!!!!
Excellent video with great info, thanks for taking the time to share. Cheers
Thank you for watching!!!!!
Good information, I needed the reason it was spitting and sputtering. Troubleshooting is where I get frustrated.
Thank you for the support, if you have any questions just ask.
Thank you.
Thanks for watching!!!
Thanks for your vids! Keep up the good work
Thank you for watching!!!!
I have 0 experience welding so I appreciate your detailed explanation. I plan on taking a welding class soon but will continue watching.
That was a clean weld how much difference would it make if you used flux core in how much cleaning you would need to do. Thanks
Thank you very much!!! Flux core is a little more messy, kinda like stick welding and is more geared to thicker metals. But I have made a video on flux core welding sheet metal. I plan on doing some flux core videos this year. Any suggestions?? Have a Blessed day!!!
Great detailed tutorial thanks, Problem I have is that I start the run ok then wonder of my line laying down a nice bead no where near the joint to be welded. This is because I cannot see my welds, I am going to mount a flashlight on my welding hood and see if it helps me see where I'm suposed to be welding
Thanks for watching, I made a video that may help ill put the link at the bottom of this comment if you want to check it out. That flash light works pretty good.
th-cam.com/video/ZEm8_1v-4wM/w-d-xo.htmlsi=rg3SW11OTd1N606D
Hi there, newbie here also, learning flux core, but a lot of MIG relates to gasless. I tried the flash light, it didn't help me because the beam was never where I wanted it. We were tidying out and I found an old angle-poise (adjustable) desk lamp I used years ago for studying. I put a daylight LED, bright-as-eff, bulb in it and slapped it on my workbench. It was like welding under a desert midday sun; highly effective. I use 6 inch coupons and the bulb easily keeps them well lit up.
What shade lens are you using for your camera to film your welding technique?
I just put my phone in my other welding helmet.
Can you do a video on welding pipe to a flat surface please?
Yeah no problem Ill try to use that for next weeks video!!! Thanks for the support!!!
Should be similar to this video😊
@@ACDesignsGarage sweet thanks I've only done it a few times. My boss said you're a smart guy play around with it figure it out
Excellent simple techniques , Great help ty
Thank you for your support!!!!
Sawtooth is my go to work the material...cant straight bead to save my life
Im with ya on that, I always saw tooth it.
Lincoln 180 dual multi process or arc captain. Which would you recommend?
I want to make sure i make a wise investment.
Thanks
I 100% understand that. Ive never used lincoln before, im a miller man so I cant say for lincoln ,but yhe price difference you can almost buy 3 arccaptins lol. The arccaptian has all kinds of upgrades, spool gun for aluminum, tig welds stick welds and mig, hard to beat, but I dont want to steer you wrong. Sorry if this dont help, but so far ive had nothing but good luck with the arccaptian!!!
Thank you for your honest opinion. Will keep you posted and thanks for the videos. Very helpful for all of us rookies.
@@tonyman5417 awesome thanks, let me know if you have any questions!!!!
why are you not beveling your metal end first?
I usually do on anything over 3/16" alot depends on the joint.
I like ur videos but I have to reverse it all because I'm left handed
Thank you, I can tig left handed but not to good on mig, I need to work on my left handed mig!!
elles valent rien vos soudures vous ne fondez pas la racine de votre cordon vous manquez énormément de voltage pour faire un cordon correctement pénétré. Quand on se sait pas faire, ou quand on n'a pas un matériel suffisant pour le bien faire , et bien on ne montre pas !
Why are you pulling when you have the ability to push.
Its just easier for me, I tend to get a taller weld when pushing for some reason.
Why does everyone who makes these how to mig weld videos always slip the gas set up. The most important part.
I thought I put it in, sorry, I get in a hurry sometimes lol. Thanks for watching!!!!!