Ah - the Claw - the Claw ! Hey - Price Check - You had a Lot of Stuff and the Yard was very Busy indeed - wow - all those Blocks of Copper - wow again ! Hey - another Garage Clean Out ! Thanks for all the Up-Dates and many Cheers from us in QLD !!!!
That was such a nice steel table Ben. Surprised you didn’t keep it. If I woulda saw that in the road I would have grabbed it, I got a nice Matco one before for free worth 350+.
You're halfway done w/ the garage. Very good progress! 👏👏👏🙌🙌🙌💙💙💙 Those bales of copper looked super awesome. Never seen copper like that before. Seen other metals like iron, steel, and aluminum, but never copper. Thanks for showing that. 👍💙💙💙😁😁😁
You said a ton on each of the copper bales? 5he one you pointed with the flexible pipe out did look like a piece of art work. Would still love to melt it down into some100 and 1,000 ounce ingots. Those would also be impressive.
Still pretty good price for your yard excellent update video when do you think you'll be doing a scrap marathon? Thank you for sharing this with us six stars brother
When I was a kid, my father saved pennies when they were still 95% copper. There were almost 1800 pounds worth. That would be about 816 kilos in your system. Mother took them all back to the bank after the divorce. So we never got the copper value for them.
@@vroom431 Yes Sir, your right. But my father didn't care. He has evaded taxes, Got free electricity. Hes a POS, I wont deny that. But I don't care what I say on the internet. He has piles of gold and silver.
Prices are slightly up in Kansas city and it's dead of winter makes me extremely optimistic for spring I think we will see a huge spike holding alot of non ferrous and prepared right now
thanks mate, needed to know a couple prices, for anyone who's wondering l travel 400 kay to sell my scrap at manhari's and usually then go to Ben to sell my e-scrap, and its worth the effort
Just found your channel. I’ve been scrapping for only about a month now. I’ve accumulated a good amount of copper, steel, aluminum etc. But I just don’t understand how in the world you get your hands on so much scrap. What are your secrets 😅
Gloves Ben! Wear your PPE when on camera! 😉😉😛 that scrap steel can cut a nasty one when handling those crossmembers and cases. Cheers mate, another awesome video otherwise 🤘🏼🍺🍺
Lansing area here. Weird to see how prices float in different places. Not consistent either, sometimes scrap steel is higher in A while copper is higher in B. I used to go to west side iron and metal in GR but I’ve been going to padnos more lately.
@@jbarbatano Yeah Padnos seems to own most of the scrap yards around this area ,,,west side is still independent but bet they sell there stuff to padnos and west side moved some yrs back to the Buchanan & Hall st area now. I was told he pays better than padnos.
That epa rubbish levy is an absolute joke on steel ., i tried to argue my scrap steel is 100 percent clean to no avail , so i make sure to add waste and crap into the load , petty i know but it makes me feel better . Cheers ben
Good for filleting fish, very noisy for scrapping stuff on. Solid steel frame with a 2" chipboard top is ideal for a scrapping table- gotta be able to use hammers on it!
2:34’mins. A Close one! that steel table was going to roll into the drivers window/door when the guy in the forklift was dumping it on top of the recycling bin.
If this was in Sweden you would have a full van coming home as they would refuse to take it,to much plastic and boards left on the comps,thats a NO THX
In any case, it being bulky objects that are mostly air, it'll be shredded. Anything not magnetic will be separated from the shredded steel. If it's pressed into cubes, anything that burns will be incinerated in a furnace.
Ah - the Claw - the Claw ! Hey - Price Check - You had a Lot of Stuff and the Yard was very Busy indeed - wow - all those Blocks of Copper - wow again ! Hey - another Garage Clean Out ! Thanks for all the Up-Dates and many Cheers from us in QLD !!!!
idk how I got here or why I watched the whole video but pretty cool
Thanks for the update Ben! Say hi to the chickens for me! 🐔🐔
Love watching you turn everything in haven’t seen this b 4 great job
That was such a nice steel table Ben. Surprised you didn’t keep it. If I woulda saw that in the road I would have grabbed it, I got a nice Matco one before for free worth 350+.
Hey Ben! Thanks for the heads-up. Great to see that prices are holding relatively steady. 👍 👌
Always nice to see your scrap runs!
Not only copper but I heard it’s going to be a good year for all precious metals.
You're halfway done w/ the garage. Very good progress! 👏👏👏🙌🙌🙌💙💙💙 Those bales of copper looked super awesome. Never seen copper like that before. Seen other metals like iron, steel, and aluminum, but never copper. Thanks for showing that. 👍💙💙💙😁😁😁
Thanks for the updates, have a good holiday
You said a ton on each of the copper bales? 5he one you pointed with the flexible pipe out did look like a piece of art work. Would still love to melt it down into some100 and 1,000 ounce ingots. Those would also be impressive.
great blogs as all ways ben Gary from Crewe England 👍👍👍👍👍👍👍
Excellent video as always.And thanks for the price list at the end.
Daily scrap marathon Ben! for December 2022.
Great Video Ben Keep Bringing The Video's Dude God Bless You And Your Family 👍👍
Still pretty good price for your yard excellent update video when do you think you'll be doing a scrap marathon? Thank you for sharing this with us six stars brother
Time at the scrap yard is so much fun. I really like how that yard does biz. Here we just throw it on the ground.
Man that table has to be worth resale!???
Thanks for the update
When I was a kid, my father saved pennies when they were still 95% copper. There were almost 1800 pounds worth. That would be about 816 kilos in your system. Mother took them all back to the bank after the divorce. So we never got the copper value for them.
If Mom did it and it was an honest mistake - Bummer. If Mom did it out of spite - GRRRRR Still sucks :-)
You can't get the copper value out of it that would be illegal. It's illegal to deface money. you should watch what you confess on the internet.
@@armchairobserver4747 No she just didn't care, my father was cheep. frugal. I think she wanted to spite him.
@@vroom431 Yes Sir, your right. But my father didn't care. He has evaded taxes, Got free electricity. Hes a POS, I wont deny that. But I don't care what I say on the internet. He has piles of gold and silver.
@james kirk understood, however blasting your illegal business across the internet pretty dumb.
Hello. Thanks for the heads up. I am from the UK; I will assume price of metals are the same in the UK, have a scrapping Xmas.
Prices are slightly up in Kansas city and it's dead of winter makes me extremely optimistic for spring I think we will see a huge spike holding alot of non ferrous and prepared right now
thanks mate, needed to know a couple prices, for anyone who's wondering l travel 400 kay to sell my scrap at manhari's and usually then go to Ben to sell my e-scrap, and its worth the effort
Awesome videos
Just found your channel. I’ve been scrapping for only about a month now. I’ve accumulated a good amount of copper, steel, aluminum etc. But I just don’t understand how in the world you get your hands on so much scrap. What are your secrets 😅
Great video
Gloves Ben!
Wear your PPE when on camera! 😉😉😛 that scrap steel can cut a nasty one when handling those crossmembers and cases.
Cheers mate, another awesome video otherwise 🤘🏼🍺🍺
Greetings to your always curious chickens. 😁
Hopefully the prices will be on the rise in the New Year.
hello, how much money did you get otherwise?
$1.25/kg for motors is great! I just scored 300kg+ of motors from work for free 😁
Only $2.95 lb copper here in West Michigan
Lansing area here. Weird to see how prices float in different places. Not consistent either, sometimes scrap steel is higher in A while copper is higher in B. I used to go to west side iron and metal in GR but I’ve been going to padnos more lately.
@@jbarbatano Yeah Padnos seems to own most of the scrap yards around this area ,,,west side is still independent but bet they sell there stuff to padnos and west side moved some yrs back to the Buchanan & Hall st area now. I was told he pays better than padnos.
Why were you throwing psus without first removing the cable? Surely unprocessed low-grade would be better Vale than irony ally?
You've been stripping variable speed drive's by the looks of it. They are excellent for scrapping out.
Cool 😊
Hey Ben I need few parts for old pc can I give you list
9:02 yes very nice block
Is there a way that you are able to know the prices per yard you go to before walking in blind so to speak?
love it
Wow if you own a stock of copper like that thats a big cash to put in your pocket.
copper cube garden coffee table
$4.25/pound #1 copper here in Ontario. Canadian dollars.
you got a skilled forklift driver this time he dumped that flawlessly.
thanks man
That epa rubbish levy is an absolute joke on steel ., i tried to argue my scrap steel is 100 percent clean to no avail , so i make sure to add waste and crap into the load , petty i know but it makes me feel better . Cheers ben
not petty at all, you are paying for a service, use it!!!
Mate, if you want help cleaning up the mess, I'll work for copper.
I'm so far behind on your videos my friend!
👏👏👏
👍
Price for cooper
🌟 🌟 🌟 🌟 🌟 👍
almost looks like you could use a teen to help you with load and off loads at the scrap yard
eWaste Where are you I hope you digest well I saw your video I'm glad now get out the streets my friend
That table would of made a great work bench shame you didn't keep it ben
Good for filleting fish, very noisy for scrapping stuff on. Solid steel frame with a 2" chipboard top is ideal for a scrapping table- gotta be able to use hammers on it!
@@rossbrumby1957 couldn't you have put a wooden top on it
2:34’mins. A Close one! that steel table was going to roll into the drivers window/door when the guy in the forklift was dumping it on top of the recycling bin.
if it was going to, it would have. therefore it was never going to.
Why did you throw away that old apple desk top there worth more and more eaven if most of it dosent work
They gave you more on the first load then you show us on your pricelist. You know why? Because it's a 2022 price list 🤣
i get gold out of computer keyboard
my experience is 3 years old
can u save me some processors
can you send me an autograph to germany?
If this was in Sweden you would have a full van coming home as they would refuse to take it,to much plastic and boards left on the comps,thats a NO THX
sounds like they need to get over themselves
In any case, it being bulky objects that are mostly air, it'll be shredded. Anything not magnetic will be separated from the shredded steel.
If it's pressed into cubes, anything that burns will be incinerated in a furnace.
@@wnytrashtrucks its The swedish law
@@aredditor4272 exactly why Sweden won't take steel with plastic on !
Burning plastic is terrible for the environment and in most countries illegal 😏
Bad recycle bad!!!!
Bad scrap bad!!!!
Bad new modern 2023 copper bad!!!!
Kids
As you stand among those blocks of copper, it like standing beside stacks of $100 dollar bills..😊
definitely worth a 4 hour trip in my case
Hard to make a dollar with the pressing price in Geelong it's at 11c kg. That's my bread and butter