PIPE DREAM - Custom Exhaust for SQUAREBODY 6.0 LS SWAP - UTX
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2023
- Today at Ugly Truck, we're installing the exhaust system on this 1986 C10 LS swap. We're using the stock exhaust manifolds, so we start by using the donor flanges to build the front pipes. Next, we go into a couple Walker Dynomax Super Turbo mufflers. From there, Jerry works his Bendpak magic on the tailpipes, with the pipes exiting out the sides. We weld up 3 exhaust hangers on each side, and with that, the underside of this squarebody LS swap is complete!
For more LS swap tips and tricks, click here! • LS SWAPS - Tips & Tric...
Follow us on Facebook! uglytruck
Check us out on Instagram! @uglytruckexperience
Want to send us something? (NEW address!)
7915 E. Division St.
Strafford, MO 65757
1HSUCOAYIXLPXTGS
#lsswap #ls #squarebody #c10 #k10 #squarebodychevy #shopdog #oreillyautoparts #jegs #summit #springfieldmo #coupleswhowrenchtogether - ยานยนต์และพาหนะ
Hey guys, Emily here. Just wanted to break the fourth wall for a minute. This video has some weird glitches in it towards the end. After a 3 day fight, 6 uploads, and numerous attempts to contact support, I'm at a loss. If anyone reading this has any suggestions, I'm all ears! We appreciate you guys so much, and I just want to put out the highest quality content possible for you. 😊😊 Anyway, don't forget about our LIVE tomorrow night June 25 at 8:00 PM 🌽 Corn Time (Central US) for the LS swap AC bracket GIVEAWAY! Here's a link! th-cam.com/users/lives7dRPUfK3Ug?feature=share
Jerry,Emily, I know you guys didn't intend to make how to videos. But if others have been helped as much as I have. Then quite a few people have been helped alot. When I started my Ls3 swap in my 03' Crown Vic. I was tryin to figure out how to get the a/c to work and alot of other things. Thanx to you guys I now know how I can do it and you've Givin me the courage to make it happen. I've saved alot of your videos so I can go back and rewatch them like the a/c one to make sure I'm doing it right. I know yours are GM and mine is a Ford, but the principals are the same. I thank you two very much. I look forward to your videos. Thank you for what you do. I know there are aftermarket cruise control units out there. I just have to figure out which switch will work with my swap. I'm looking into seeing if the switches in the Ford steering wheel will work. I just have to swap my plain police wheel for one with switches if it would work lol.
Thanks so much, Hugh! We love hearing that the videos have been helpful! It's been so awesome to hear about all the different swaps going on, and I think yours might be the first Crown Vic! We appreciate you tuning in! --Emily
All I can say is Thanks!!!! Keep doing what you're doing, sometimes we go down an unexpected road. Nothing wrong with it as long as it's the right road... You guys are definitely on the right road!!!!!
It's not the road we meant to take, but we like where it's going! Thanks Chucky! 😁😁
'An Exhausting Tongue-Tied Tale Of Shifter Thingies and Suspension Bracklets'
Jerry evaluates his bends to make.
Calculations cyphered as he goes.
Every effort does this mechanic take
2 accomplish wins an' vanquish woes.
For on this day, we now, shall witness
A professional create true perfection.
Not some convoluted backyard mess
But one stellar Geometric exception.
Muffler n' pipe for Square Body now.
Much technology now we are shown
Jerry's decades O' skill an' Know How.
(Hard work paid 4 things he does own)
All Bends are mathematical perfection
Welds are shared ; Emily does assist
Amid tweaks made for angle correction.
Twin pipes now upon jack stands sit.
Hangers are made with over-built care.
Bung holes are drilled with Art Class skill.
Perfect routing clearance come to bear.
Ug Truck Ex proceeds with calm an' chill.
Components are in-house custom made.
Installed with pride and placed just so.
All parts, even fasteners, all top grade
Top off (and end) this exhausting show!
Have you questions 'bout this and more?
Then, book now UR UTE Live notification !
For an Ug Truk Experience sure not 2 bore.
LIVE June 25th @8PM CT.. Free Admission!
This video's ' okay' count is.. One hundred and one (101) .👍👍
Thanks so much for joining us tonight, Ray Bann! We appreciate you!! 🙌🙌
Another great video spitting knowledge. Thanks Jerry & Emily. My favorite channel.
Thanks Jon Jon! We always appreciate you tuning in!
I love that Ross Perot sticker on the tailgate of that square body. Talk about period correct! Very cool.
It is the greatest. The guy who owned this truck had something to do with making the Perot stickers. He actually sent one. We are going to frame it. Thanks for watching small block. Jerry and Emily
That pipe machine is awesome
The video was very very cool now I do know just how much does into making a exhaust he bent those pipes so easily I could never do that awesome awesome work I seen the glitches but still great video
Thanks Bobby! We appreciate you joining us on the Live last night! Congrats on your bracket!!
Very nicely done!
Thanks DE! It turned out really nice!
I am going to send this to Terry
Awesome! I know he's doing a lot of work to that truck right now! Thanks Ray!
@@UglyTruckExperience he is getting ready to lower it. He was going to have it done before the C10 Shindig last weekend but that didn’t work out. My truck did great on the trip
A step drill works very good on thin wall pipe.
We should definitely invest in one of those! 🤣 Thanks for watching!
Glad to see thats not a bud light can on your bench 😁Lol ,great video ,have a good weekend
Thanks Samuel! We appreciate you tuning in!
🤣😂🤣😂. Samuel I am glad to see that as well. No piss water. I could comment more on that but I'm here for knowledge. So I will restrain myself from sayn anymore. AMERICA
@@jonjon_az also here to learn, couldn't help myself,hope everyone understands. Can't hardly pass up low hanging fruit.
@@samuelmcgill-rl3lb the ones with pronouns won't. But America 1st people will.
@@jonjon_az I'm with you ,pure blood , america first.
Nicely done! All the others on TH-cam say “Gotta take it in to the shop for exhaust…” Not Jerry! Like you said this isn’t exactly a DIY how-to video, but it does make you appreciate the work done and also to help a person realize/justify the cost of the bill at the muffler shop seeing all the detail work that goes into a full exhaust run.
One question….I rewatched some of it and still couldn’t figure it out. Why does the driver’s side get welded directly whereas the passenger gets flared? Just because of all the tight bends due to the linkage and O2 bung?
Great job all around on this build. Seriously a full-service jobber. Wow! Ready to see the rest of it.
Also….Is that the factory Uniroyal Tiger Paw spare I spy under that truck?
Keep up the great work you two!
Thanks so much, Lance! That was our exact reason for making this video! Exhaust is usually a "drop it off and poof it's done" thing, and the owner rarely has the opportunity to see the process. We've talked about doing a similar video on alignments for the same reason.
To your question: The exhaust manifolds have 2 different types of flanges, and it's easier for us to reuse the flat flange on the right side. On the left, we've reused that whole flange down to the bend, including the O2 sensor, and that works fine too. It's pretty easy for Jerry to make a new flange on that side, and that way he can make sure the O2 sensor is in a good spot. Plus, I think he just likes to play with the tubing bender. 🤣
And yes! That's the original Tiger Paw spare! 👍👍 Thanks for tuning in, Lance!
@@UglyTruckExperience Awesome, thank you! And I’d love to see an alignment video. We have so few shops around here for alignment and most of them aren’t real trustworthy so it would be beneficial to know what is going on.
I had my original Tiger Paw in the back of my ‘88 Blazer but it developed a big ole lump on the sidewall. I wish I would’ve kept it and hung it on the wall!
Just found your channel...Great content!!
Thanks Chris. We appreciate you watching. Jerry and Emily
Cool video ✊🏾
Thanks Anthony! 👊👊
good afternoon 😊
Hi Alonso!
Holes for the sensor can be made with a stepped drill bit
I think a wooden drill bit would have worked as well as the one we were using... 🤣🤣 Thanks Alex! We'll order some up!
@@UglyTruckExperience 😆🤟Greetings
Very clean! My pops had this same setup. If the customer had wanted a x pipe or h pipe would it had been a big issue with the driveshaft?
Hello Bigdawg. No, it is no problem at all. When I do them I flange them though just in case I have to remove the pipes in the future. Thanks for watching. We appreciate it. Jerry and Emily
You can never have too little hangers nothing more annoying is exhaust that’s flapping in the wind
Definitely! We have a very nice truck here that was swapped by someone else, and the first thing Jerry pointed out was that there's only 2 hangers on each side of the exhaust. He might be a little OCD... 🤣🤣 Thanks for tuning in, Tim! --Emily
All this Rust yall must live in the Snow States…
I don't know if it's this area, or just our price range. 🤣🤣 We're in Missouri, so we don't get a lot of snow, but they salt the roads every chance they get in the winter. Thanks for tuning in, Bernando! --Emily
Go get a step bit.
We seriously need one... I think I could have chewed through it faster than this bit. 🤣 Thanks Bobby!
I cut my hoses with p v c cutter also.. he is cutting the hose with a razor blade.? I would cut my finger all up... lol