✨ LG DISHWASHER - NO POWER - How To FIX ✨
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- ✨ LG DISHWASHER - NO POWER - How To FIX ✨
This Video shows how to easily replace the power line filter when your LG Dishwasher no longer has power. Always first check the outlet the dishwasher Is plugged into to confirm the outlet has power.
✨CLICK HERE TO ORDER PART TO BRING POWER BACK TO YOUR DISHWASHER: amzn.to/3eiyD08
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-TH-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
Wonderful step by step DIY repair video! Thank you!
Glad you enjoyed it!😊😊😊
It worked! Called LG. They referred me to an "authorized" repair person who when I called said they don't do LG and don't know why LG would refer them. He gave me another "authorized" repair person who when we contacted them had the same answer: "we don't do LG". LG Service is an absolute trainwreck. Went to the store where we purchased in in June, 2018. They do were not helpful. So I turned to TH-cam. Tried to the power off, tilt, reset. Whalaaaaa. So grateful.
Nice job Tom😊
This fix worked for me. Since the Dishwasher is about 7 years old, I decided to put in a new pressure hose while I had it out. Total parts was about $70.00. Thanks
Wow,
Nice job Joe😊
This tutorial helped me fix my dishwasher!
Thanks so much Lisa😊
Just had this happen to my lg dish Washer too.. Same exact symptoms... Feeling confident I can fix it with this easy to follow video
You can do it👍
Thank you this shows a lot on how to fix my issue.
Thanks Randy😊
Thank you so much. I followed your video and fixed my own dishwasher!!! I don’t own the tester thing so took a chance that it was the noise filter assembly. It was. Thanks again!!
The noise filter is mostly there to prevent the "LG direct drive" variable frequency motor controller/drive from back-feeding transients on the power wiring that can nuisance trip smart GFCI breakers who identify the VFD as a ground fault.
Perfect! It was a 6201EC1006T that I picked up today from Reliable Parts. After checking the main board and switch which were both fine, this filter board was the culprit. Thanks Scott. Other than a card, this is the perfect Valentine's Gift for my lady.
Dont buy lg
Great job on this video, cant thank you enough for the tutorial. You helped me narrow down, and fix my LG dishwasher. Keep up the great work.
Thanks so much😊😊😊
Thanks for the video! I was having this exact problem with my dishwasher and this video let me know it was relatively easy to fix. Turns out, my power cord was just loose, so the hardest part of the fix was getting out the stripped screw from whoever installed the thing.
Nice job Ben😊
I also had a bad power line filter. It was discolored around the fuse , just like the one you showed. It also melted the plastic tray where the fuse is mounted, on the bottom you could see the solder pads had overheated and deformed the plastic also. It looks like the fuse is overheating and the solder pads are too small. After replacing the filter I measured the line current and it was 10.45 A. Well within the ratings of the fuse (15A) . I think they need to address this problem. A short term “power spike” would not cause the plastic to deform
Yep, you can put a power strip between the wall socket and the dishwasher plug to protect it.
Scott: Not just good: EXCELLENT! great video, great safety procedures, and great meter stuff. I needed a better visual of checking the noise filter fuse but other than that awesome!
Thanks so much Carl😊
Thanks, mine turned out to be loose electrical connection at power supply - I guess wire nut was not tight enough from initial install, and it vibrated loose over time. Tightened wire nuts and turned on circuit breaker, and back in business.
That is excellent news Robert😊
@scottthefixitguy thank you, thank you, thank you! You seriously saved me money. I watched your video and decided to give it a try. It was a bit hard to locate the part but I was successful on Amazon. I literally just followed your steps and found that my existing board fuse passed the continuity test. Nevertheless I swapped the old board out for the new one. Put everything back and fired her up….I was shocked LG dishwasher came back to life. This honey do list item was just in time for the Mrs’ birthday. I can’t thank you enough for a full step by step tutorial. Greatly appreciated!!
I love it Awesome job, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
This video was a good start, but what if the fuse in the power filter module is intact, so you have AC power getting to the control board, but there is no display?
Scott i have the same problem as you. Did you ever get yours fixed?
David Harte Hi David! It turned out that there were fatigued and broken wires, where they bend around the bottom of the door. The very helpful LG repair guy also replaced the main control board, because he had brought it, but the control board was not the problem.
Many thanks for this. I also found the fuse blown in the noise filter. Replacement part was Can$ 90 delivered from Reliable Parts. The phillips screw was impossible to remove and I cut through it with a small hacksaw. Secured the new part with a screw from the outside. I wonder if a $2 fuse would have fixed it?
I did it the same way you did👍
That's my question. Why can't we just put a new fuse in? Why replace the entire box?
hello I have an LG d1453wf dishwasher and I'm starting to get tired of it because the touch buttons break down a lot, and now it was the water pump in 5 years it never gave me rest I'm fed up LG DISHES NEVER AGAIN ...however the LG machine washing machine is TOP
Good job...
Thanks To,
They do make a good washer👍
Was it the glass fuse that you tested? Your camera did not show that part..
Thank you
If you plug your dishwasher and take care, you will see a led on each functional pcb. If the light is off, unplug remove the pcb . Don’t need to remove everything.
Thnks lot
You’re welcome👍
I have exact same dish washer. Do you have the part number and website you ordered the line filter from? Thanks for posting
thanks for posting!
Thank you.
VERY informative ! I had same thing happen to me..no power on my LG.. model LDT5678ST. I had a service guy come, checked breaker and plug (which i obviously did first too). he didnt look inside the dishwasher ..he didnt remove anything. he quickly diagnosed that it needs a new front panel ($500+). was that a hasty diagnosis.. could someone tell that quick without looking inside . the dishwasher is only 2 1/2 years old. to me it seemed pretty fast without looking at anything else..but that may be standard. thougths? thanks!!
It might be that board, but I would try the power noise filter first👍
Just keep an eye on him when he returns to install board to see if he also changes out a the filter.
Another great video as always Scott... Keep up the great work... Still need more Refrigerator troubleshooting / diagnosing videos.
It sounds like the power line filter on the lower right side needs to be replaced 👍
Is the noise filter an expensive part please??
The fuse on the noise filter is good, the fuse on the main control board is good, still no power. The door switch test ok (continuity). What else? Still no power. Wire harness in door ok. Breaker ok. power to unit ok.
What is the fuse amp ? Sorry longtime
I took out the screw from the noise filter at the bottom of the machine but the white module is not coming off . Its stuck somewhere
You need to push and pull it to your right to make it let go. You can even pry it out with a large screwdriver breaking a plastic tab if needed. The new line filter doesn’t need to be firmly attached when installed. Just need to get the wires back on and the screw back in?
Good luck,
Scott
Hey Scott, I am working on a very similar dishwasher and it’s not powering on. Before it was, and I replaced the main motor that was burned out and shorted to ground.
I checked both fuses and the door latch. What do you think I should do next?
The power was working before I replaced the motor, it said PF (power failure) because it would trip the breaker every time I tried to turn it on
How about the line voltage noise filter?
@@ScottTheFixItGuyChannel I didn’t check voltage with the power on, but I had continuity between all components
That is strange, it almost sounds like one of the modular wire connectors got loose during the replacement of the motor.
Might be good to just recheck all the connectors👍
@@ScottTheFixItGuyChannel thanks! Will do
Great video, what's part number?
There’s a link In the description
The part is in the description 👍
My LG dishwasher with top controls does not turn on at all. I took the noise filter out and the fuse checks out okay. I also checked the other fuse in the main PCB and that is also looking good. Could it be the power button itself? Any guidance is greatly appreciated!!
I just took mine apart for the second time. Found a broken wire at the bottom of the door where the harness flexes. Repaired the wire and it works again.
@@Greg7901 mine started working by itself after being unplugged for a few hours. Thanks for the input.
Well, it happened again... I turned off the circuit breaker for a few days and nothing happened. I was testing continuity and power through the line filter and lo and behold, some sparks (probably from the capacitor discharging) and now it works again (knock on wood)!!
Is this the likely issue if the dishwasher will still power on occasionally? Every now and then mine will power on, but I click the power button 100 times it may come on once or twice.
Thanks Dave,
I think it might be the door switch or the start button.
Probably not the line noise filter👍
did you just replace the fuse or the whole noise filter unit
The whole noise filter unit👍
Where can you get that module you replaced ? I think I have the same problem of no power . Thanks
Here you are: www.amazon.com/LG-6201EC1006T-Dishwasher-Filter-Assembly/dp/B00FLLPHOW/ref=asc_df_B00FLLPHOW/?tag=hyprod-20&linkCode=df0&hvadid=198089608681&hvpos=&hvnetw=g&hvrand=15591883403202931314&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9032028&hvtargid=pla-365752128386&psc=1
@@ScottTheFixItGuyChannel - That item looks a lot like the part you identified as the noise or line filter, but the seller's info says "Vent Fan Motor and Case Assembly for LG Dishwashers is also called Door Vent Blower Motor Assembly". Could that be the same part?
It should be line filter👍
@@QuickAndEasy5MinuteAppliance - The headline calls it - "Genuine OEM Detergent Box Assembly". Don't think I will trust them. But thanks!
Would it make a popping sound when this part fails?
Hi- after I saw your video I ordered the part and replaced and viola! IT fixed it- at least I thought so but after one week, no power again.... (sad face).. The old noise filter thing had a brown sticky residue where the fuse was so after this second failure I wonder (A) if it is getting wet (hence) the sticky stuff or (B) whatever caused the first failure - caused the second... I am at a loss and bummed out. Any thoughts??? thanks
I had the same thing happen, what did you do next?
@@wreeder for me- the swap did end up working. I found out that when I had undone the power to the unit (in the front little junction box) there was a bad connection. Once I fixed that it has been working fine ever since.
What is the model number?
Can you just change the fuse?
Have to change the power module.
Video fails to show how to test fuses, video not close enough or video not shown, both of which are really the key elements missing. Other than this, video fairly thorough
I have a similar issue. But I can get the keypad to be responsive again if I unplug the machine, then wait about 5-10 mins. This only temporarily allows me to power it on. Since I can get intermittent power to the touchpad, would this eliminate the solution mentioned here (blown fuse in noise filter)?. I would assume a blown fuse would permanently prevent the machine from powering on?
Inhave the exact same issue! Leaning towards a control board issue. But things are expensive and dont want to waste money.
Hi John, Great Question👍 Click Here to Join Our Channel and I’ll Set Up Live Help with You to Get this Fixed: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
New Problem: While the panel now lights up ... The dishwasher won't fill with water. Error code "IE". We don't think the water inlet valve is faulty (we tested it independently and it had good water flow). So we are perplexed why the dishwasher won't fill with water. More details on "Update 2" below. Any thoughts on what to check next?
Previously Posted:
I have an LG dishwasher with no power and no lights. It was struck by lightning a few days after purchasing (my relatives gave the dishwasher to me, as they got a new one with the insurance claim). I've replaced the noise filter, main pcb board, light panel board and door latch. Seems to have continuity through both fuses and at the power supply. Still, no power and no lights. When I press the power button, the main pcb board has a red light that lights each time the power button is pressed. At my wits end as to what to check next. Any thoughts?
Update: I reconnected the old PCB board ... still no lights on the front panel, but the drive motor pulsates when I press power. My guess is both PCB boards are faulty. Making progress perhaps.
Update 2: The replacement PCB board from E-bay didn't fix the problem. But, once we disconnected the Drive Motor wiring harness, the power and light panel be came functional - hurray :) Unfortunately, we now have an "IE" error code, indicating a water inlut issue. The water inlet valve isn't being switched on to call for water, so the error code keeps coming on. We determined that the water inlet valve is good, since we tested in with direct connection to the 120v power and water immediately started flowing. We don't know why the dishwasher isn't allowing the water inlet valve to open and allow water to fill. Any idea what's going on?
Sounds like progress👍
...
When you unplugged the motor wire harness the panel came to life? Then you may have a blown/shorted motor. The first thing a dishwasher wants to do is DRAIN when it comes on, NOT fill. See if the drain motor works. It will never start to fill if the drain motor is bad
My lg dishwasher shows a pf code that won't clear. And the dishwasher won't start. Could this be caused by this noise filter. It stopped during wash cycle.
Thanks Lloyd,
Does the cancel button do anything to get rid of the power failure symbol? I think on your model you might have to press the start button for three seconds to reset the machine.
@@ScottTheFixItGuyChannel ok I tried the power button thing and the cancel button nothing changes just says pf.
Thanks Lloyd,
Was there a recent power outage?
@@ScottTheFixItGuyChannel I don't believe so no breakers where flipped. I've tried different working power outlets. When I plug it in push the power button it shows the last cycle it was in and pf code. it just won't reset no matter what I push.
So I am getting very little power to the top display board on my LG Dishwasher model: LDP6797ST. The wiring harness plugged into that display board is getting 24 volts from the orange and black wire. Is there something else I can check to narrow down a main board vs display board vs noise filter?
Can you check for 110 V coming out of your noise filter?
@@ScottTheFixItGuyChannel Both red plug and white plug are putting out 117 on my meter.
So, when I press the power button on the top display a red light comes on on the main board🤷♂️
That’s good voltage👍
I think it’s time for a new control board. They’re pretty cheap.
Whats the name of the Gizmo
It’s called a noise filter or power module👍
Thank you 🤝
Any idea where to get replacement racks for this exact model?
Video disabled by owner from playback on other sites. Yet was found by searching on youtube website...
I just pulled my “noise filter” and have a little more than 2 ohms. I’m guessing that I’ve got a different problem if I’m not getting power. I guess I’m going to open the face like in the beginning of the video.
Update1: mine has the clean face. So it may be slightly different, manufactured in 2009. The fuse on my main panel is good too, and I am getting power to the time LCD and the power button. So I guess it’s worth the $24 it appears I can spend for a control panel someone on eBay has. Got my fingers crossed it saves my dishwasher.
Im in the same boat as you... I tested the Noise filter and I'm getting 1 - 2 ohms. I will be checking the front panel tonight to test the fuse in there. Did your front panel also have a bad fuse? Is that why you replaced it or was there another reason? Did replacing the control panel fix the problem? Thank you for any additional details.
Why does it shut off when it gets too much water in the outflow pipe and you have to dry it out for it to reset?
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
We’ll Get It Fixed 👍
That did not come out correctly, but your answer was cheesy.
At least it was to me as an elderly woman. Lol
I guess I was really asking a rhetorical question because I had already fixed the problem... several times.
I have never called a handyman out when I could do it myself, and this is easy.... just annoying.
I meant to say that I do not know why LG designed their dishwashers that way.
I don't always use my dishwasher, but when I do, I would often open the door to let everything air-dry.
I realized that water was collecting in the outflow pipe, causing it to trip and turn off power.
Now I only put it on normal and let it run, including dry. Problem solved.
@ScottTheFixItGuyChannel oh, I see this is money to support the channel, but it says I could join for $2.99, so why are you bumping it up to 5? Lol
score! thank you!
It's a long screw, because when the board goes -- you're screwed!
Yep, 😂😂😂😂😂
CL code is on ...
Help me
Can you send that same question to my email? At: scottthefixitguy@yahoo.com
any women do this? so I can know if I can
Thank you