You could of done it a way better way with a relay use the tail gate light it turns on with the cargo light .what you do get the get to power from the trailer plug connect that to 30 on the relay from the tail gate light connect it to 86 on the relay that is the trigger then from 87 run it to the light 85 is ground and if you want to add a switch you run the wire from 87a to the switch the from the switch to the light and of course add some fuses just to be safe and your done works just like the factory lights .
Thank you for the suggestion, I've reuploaded the video with the corny ass music removed: th-cam.com/video/nQ6biBjkYkI/w-d-xo.html I've since ordered an actualy microphone, so I hope to have better audio quality for future videos.
Hi Tim, I used 16ga wire with 1/4” wire loom. The draw is very low on the led’s so I wouldn’t be too concerned with wire size. The run is probably only about 5 feet ea side too. It’s just the sizes that I found in the garage
@@detailership Awesome, bought all the items needed. Will work on it this weekend on my truck and my brother's truck. Will let you know. Thanks for the video!
You could of done it a way better way with a relay use the tail gate light it turns on with the cargo light .what you do get the get to power from the trailer plug connect that to 30 on the relay from the tail gate light connect it to 86 on the relay that is the trigger then from 87 run it to the light 85 is ground and if you want to add a switch you run the wire from 87a to the switch the from the switch to the light and of course add some fuses just to be safe and your done works just like the factory lights .
One lead of the magnetic switch will ultimately go to the truck's frame. The other lead of the magnetic switch will go to the negative of the switch / light combo, in this setup. Or, you could put one lead to the hot coming in from the source (switch), and then the other leg would go to the light.
The lights that are on the link are not the same. They are smaller and dont fit in the pre hole on the side of the truck also no room to drill the hole for the button.
Just checked the link and it’s still the same one purchased. You have to offset the light higher or lower to make room for the button either above or below the light.
This is actually all the information that I was looking for doing with mine. Thanks for this video, I was wondering about some of it.
awesome! nearly 3-years later, still running strong and haven't had a single issue with it
You could of done it a way better way with a relay use the tail gate light it turns on with the cargo light .what you do get the get to power from the trailer plug connect that to 30 on the relay from the tail gate light connect it to 86 on the relay that is the trigger then from 87 run it to the light 85 is ground and if you want to add a switch you run the wire from 87a to the switch the from the switch to the light and of course add some fuses just to be safe and your done works just like the factory lights .
Thanks for this. I'm definitely using this design.
music is too loud. can barely hear you.
Thanks for the feedback, this was a pretty last minute effort to document the process. I do need some kind of microphone set up for future videos
Here it is reuploaded without the background music: th-cam.com/video/nQ6biBjkYkI/w-d-xo.html
Was about to say same thing... matter a fact I still will to hopefully push the subject
I did the same thing with miy magnetic switch just on the Drivers side and stripper lights for extra fun!
Do you have a diagram of how you wired everything together?
Can u redo this video without the corny ass music playing in the background! So annoying I can’t hear what your saying it’s playing over your voice
Thank you for the suggestion, I've reuploaded the video with the corny ass music removed: th-cam.com/video/nQ6biBjkYkI/w-d-xo.html I've since ordered an actualy microphone, so I hope to have better audio quality for future videos.
But I was able to put the lights on a backing and the switch. Took a little longer but it did work. Thanks for the video.
Super Helpful!
Can u tell me how did u connect the magnet
Where did you get the black plate that you mounted the LED lights onto? I see the links to everything except that? TIA!
Came with the car
Agreed with others... music was far to loud. Came to here you my man. You hqve info we need... not elevator music. Luckily it shuts off
See other video, I removed the background noise. Thanks!
What was the amps on the in-line fuse that you used?
5amp
Hi Johnny, what size of wire and wire loom did you use for this project?
Hi Tim, I used 16ga wire with 1/4” wire loom. The draw is very low on the led’s so I wouldn’t be too concerned with wire size. The run is probably only about 5 feet ea side too. It’s just the sizes that I found in the garage
@@detailership Awesome, bought all the items needed. Will work on it this weekend on my truck and my brother's truck. Will let you know. Thanks for the video!
@@timhoang how did ur project turn out?
@@bdm408 Very good. works great.
You could of done it a way better way with a relay use the tail gate light it turns on with the cargo light .what you do get the get to power from the trailer plug connect that to 30 on the relay from the tail gate light connect it to 86 on the relay that is the trigger then from 87 run it to the light 85 is ground and if you want to add a switch you run the wire from 87a to the switch the from the switch to the light and of course add some fuses just to be safe and your done works just like the factory lights .
DOESN'T SHOW HOW TO CONNECT THE MAGNETIC SWITCH, i tried various combinations using the same items.....IT DOESNT WORK...
One lead of the magnetic switch will ultimately go to the truck's frame. The other lead of the magnetic switch will go to the negative of the switch / light combo, in this setup. Or, you could put one lead to the hot coming in from the source (switch), and then the other leg would go to the light.
Looks good nice job
Where in Cali are you
bay area (norcal)
can you do it to my truck
@@J.NX10realestateinvestor no, sorry
Do you have a video of step by step ?
Music is terrible !!! I hate videos with music in the back ground
The lights that are on the link are not the same. They are smaller and dont fit in the pre hole on the side of the truck also no room to drill the hole for the button.
Just checked the link and it’s still the same one purchased. You have to offset the light higher or lower to make room for the button either above or below the light.
your sound is terrible
There's a reupload with the music reduced. Link is in the description...