Scion FR-S Catback Exhaust Install (Toyota 86 &Subaru BRZ Catback)
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2019
- Scion Fr-s Catback Exhaust Install. How to Install Invidia Q300 Catback on a Scion FR-S, Subaru BRZ, and Toyota 86. How to Remove and Install a catback exhaust step by step. Removing exhaust hangers without tools. Sound clips at the end of video comparing the stock exhaust to the new catback exhaust
- ยานยนต์และพาหนะ
Literally nobody makes a video as helpful as this, you are absolutely a life saver now I can confidently install my exhaust thank you!
Thank you so much..really appreciate it🙂
Agreed! Thank you so very much
you seriously made this look so easy. Video is so detailed that I think with no prior experience I can do this.
Thank you🙂
We need more videos like this for intakes and almost any mod for your car 💯
I do have one for a cold air intake as well🙂
Legendary video. Just got an FRS and i want to install an exhaust but I have never done anything on a car before. I think this is a good first mod to do and learn about how your car works and this video was magnificent. Well done!
Thank you🙂 let me know how it goes..good luck🙂👍
Good job. Just an added tip to anyone else who watches this, when using a band clamp like that, its recommended to put the bolt of the clamp 90 degrees to the notches in the larger diameter piping to avoid leaks. Torque is usually 45 ft lbs on those type of clamps if anyone actually cares lol
Awesome tutorial! This looks way easier than you would think, and probably saves a ton of $ paying labor to a shop. My only problem is finding a bolt on catback for my Q5 2.0t. Flowmaster makes a really nice kit for about $800 for the 3.0t, but not for the 2.0t. I messaged them to find out if it would be compatible with my vehicle. Hopefully I may get some good news. Your new exhaust sounds awesome, I'm sure you love it! Thanks for posting!
Thank you🙂 yea doing this can look more intimidating than it is..hopefully it is compatible...good luck(crossing my fingers)
I’d love a vid on how to bleed brakes, replace both the manual transmission fluid and the differential fluid too! Love your vids, really helpful. I subscribed.
Thank you i really appreciate it🙂..yea ill definitely work on getting to those
You go over every detail and provide excellent tips. Amazing video. You should make more!
Thank you🙂 yes i have made many more
@@backyardchevy328 I’m watching them now! Thanks man!!! I love your cat!
@@damfnmaster thank you🙂
Great work! I have a 2014 FRS and I’m going to change my exhaust soon
This was very therapeutic to watch
Fantastic video, brother. It can't be easy to move the camera around so much and take shots of every step but it makes a huge impact
Subbed
Also a big help that you're doing it on the ground like most home-gamers haha
Thank you🙂 really appreciate it
Great informative video! Thanks for making this!
Thank you🙂
just ordered this one, cant wait
whats the link?
Radio is very detailed and an excellent help. I purchased a used q300 which should not come with any hardware. Can you please let me know the size of the nuts 'n bolts and the gasket? Thanks.
This is very instructional thankyou
Great video thanks man 🙏🏻
Thank you🙂
You did great brother...btw you may have answered this but which exhaust is this? Im looking for one for my frs...this looks and sounds great...very nice ground clearance too
Hey man !
Nice video !!👍🏻👍🏻👍🏻👍🏻
Thank you🙂
Very nice video. Good job
Thank you🙂 i really appreciate it
excellent vid man - thanks
Thank you🙂
Thanks for the video!
Anytime🙂..thank you for watching and the support
Great video!
Thank you🙂
A master class. Thanks.
Thank you🙂
amazing video
Thank you🙂
I have an Invidia Q300 also and did you get this exhaust because the big flat muffler helps the aerodynamics underneath? Savagegeeese says it help against the parachute effect.
Lol it does? I didnt know that
really helpful
Thank you🙂
Awesome!
Thank you🙂
How would you adjust the tips if they are uneven?
The 4 rubber hangers in the back, if u take the weight off hangers they have enough play to adjust em to the left or right
You da best!
Thank you🙂
How did you keep the car from rolling forward?
I use wheel chocks in front of the wheel but u can also use pieces of 2x4 wood in front of tires
Nice.
Thank you🙂
I assume the Borla exhaust will be this easy. Thanks for the video
Yea it should be that easy🙂
How loud is it compared to stock, will it piss off the neighbors?
Its definately louder than stock...if u rev it often itll piss em off lol...at idle theyll know u have ur car on
Thanks!
Thank you for the support🙂
God bless you 🙏🏻
Thank you🙂
Nice video. What tires are those?
Thank you🙂 i believe the federal ss595's
What model is this muffler?
Invidia q300 i believe it was
How much hp do you think you gained?
Well normally u wont gain much since the most restrictive part of exhaust is the cstalytic converter..so id say probably 5-8hp...but it does open it up at higher rpms
How much you paid for the mofle
It was about 700 for the whole kit
Can you list all the tools that you need for this?
WD-40...A 3/8ths ratchet...(all sockets for 3/8ths drive)..14mm socket...17mm socket..12mm wrench...14mm wrench...exhaust hanger removal pliers or just a flat head screwdriver.
@@backyardchevy328 thank you, also how much torque foot pounds did u use to tighten them?
@@felixa1717 well it didnt include any torque specs but i believe the front bolts were 25 ft lbs that connect to the cat back...the rest id probably do 25-35 ft lbs torque
just ordered this one, cant wait
whats the link?