Hp printer ink tank conversion with a CISS kit (DIY) Part 1 -- Its About Everything.
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Hello and welcome to
Its About Everything.
/ itsabouteverything01
In today's episode i am going to show you how you can convert your Hp inkjet printer into an ink tank printer with a CISS Kit (continuous ink supply system )
A ciss is an external ink tank that supplies ink to the cartridges inside through very small rubber flexible tubes. In this way the cartridges never run out of ink and keeps on working flawlessly, how ever there is a catch , you have to keep the ink tank at a certain level as the cartridges. If you keep the ink tank a little high then the cartridge will overflow with ink which means that the ink will simply start dripping from the printing heads and spill in the interior and if you keep the ink tank lower then the cartridge level then the ink will not flow into the cartridge and while printing you will see missing printing areas in the page. so the height has to be some were in the middle.
I will show you how to do that in the upcoming videos
so Subscribe to my channel
to get updated and don't forget to
Like and share as well
This video was not sponsored by any product shown used or name mentioned .
Bhai do we need to use new cartridge??
If the old cartridges are working fine then no problem , you don't need new cartridges
Thank you
You are really good buddy. Kudos on your thorough analysis, clear explanation & picturization... Keep it up & thanks a ton.
Is it compatible for 2676 model which has 680 catridge
Can you pls share the ciss kit link
Thanks!
what brans is the kit and were can i buy it..
Bhai cartridges ke sab hole band karna hai kya? Except pipe holes? Please reply. I did it but the cartridges keeps on leaking, the leaking doesn't stop.
Don't keep the ink tank and printer at a same level. Take two or 3 books and keep the printer on top of it. About 1 inch above the ink tank then try to print. If still page comes out with over flow marks then add 2 more books under the printer and raise the level a little more and print again.
Repeat the process untill prints smoothly.
Don't raise it too much or the print will have gaps in between the print and the ink will back flow.
Height adjustment is necessary
Yes Plug all holes except the pipe connectors
@@ItsAboutEverything01 Thnks you very much. It means sab Gravity ka khel Hai.
Bhai dose it work? This CISS thing?is it a success?,how long dose it work