Nice video, thanks! I'm the guy who makes the Forever Panels (the abs part) for Moss, I just sent you an email. I've got a few bits for you to finish these up.
@@thejasonrk I use 1/8" closed cell foam on the panel first. The factory used open-cell, but it collapses really easy. I'll typically put a little blue tape over the clip hole area before I use the spray glue - this allows the foam to give just a little and not telegraph through to the top surface.
@@AlexPerrucci...the trick finding the right adhesive (e.g. 3M automotive) or other liquid adhesive. if magnets can work for speaker grills, they can work for door/trim panels too, yes?
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 ธันวาคม 2567](http://i.ytimg.com/vi/dNTiBBthKgQ/mqdefault.jpg)
Nice video, thanks! I'm the guy who makes the Forever Panels (the abs part) for Moss, I just sent you an email. I've got a few bits for you to finish these up.
Thank you! Replied. 😄
when using the factory clips, how do you make them not show up in the leather, i guess use a foam backed leather?
@@thejasonrk I use 1/8" closed cell foam on the panel first. The factory used open-cell, but it collapses really easy. I'll typically put a little blue tape over the clip hole area before I use the spray glue - this allows the foam to give just a little and not telegraph through to the top surface.
I got the tan ones hoping they would match my interior, but the shade was slightly off. They are very well made and I just dremeled out the holes.
I was wondering about the tan, thanks for the info!
Looks cool! Take a heat gun to them window crank handles (off the car) and refresh that plastic!
Looks super clean! Good job guys :)
Thank you!
can strong adhesive thin magnet strips be used to help secure the upper arm pad to the door. or possibly hard drive magnets?
Never thought about that. Worth a try for sure!
@@AlexPerrucci...the trick finding the right adhesive (e.g. 3M automotive) or other liquid adhesive. if magnets can work for speaker grills, they can work for door/trim panels too, yes?
Did it help with rattle window noise? When closing the door or going over bumps? Any tips?
There are Window bushings that can be replaced, I would suggest looking at those, Moss Miata sells them!
@@EricJergs I did those and it helped some. There’s are still some rattle over bumps tho. Thanks
where did you get the door panel clips
Pretty sure we just got them on amazon. Pretty standard door panel clip.
Turn the screwdriver around and use the top end
Nice Hat Eric
Hey man thanks, I know a guy who could get you one
thank u gentlemen
Nice nice nice !