Classic Mini - How To Replace Suspension Cones
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- #classicmini #cones #suspension
Join this channel to get access to perks:
Patreon - / classicminidiy
TH-cam - / @classicminidiy
❱ Shop - store.classicminidiy.com
❱ Seven Mini Parts - bit.ly/7evenmini
❱ Instagram - / classicminidiy59
❱ Facebook - / classicminidiy
❱ Parts in this Episode:
- Cones: minispares.com/product/Classic...
- Cone Compressor UNF: www.7ent.com/products/cone-sp...
- Cone Compressor Metric: www.7ent.com/products/cone-sp...
- Ball Joint Splitter: geni.us/vbjSjtK (Amazon)
- Knuckle Joints: www.7ent.com/products/knuckle...
- Hi-Los: www.7ent.com/products/adjusta...
0:00 Intro
3:02 Parts Breakdown
4:27 Common Questions
10:10 Rear Cones
19:45 Front Cones
33:45 Wrap up
Thanks for watching Classic Mini DIY! Please note Classic Mini DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Classic Mini DIY recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Classic Mini DIY, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Classic Mini DIY. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad. - ยานยนต์และพาหนะ
![[ไฮไลต์] แบดมินตันหญิง ไท่ ซือ หยิง vs เมย์ รัชนก อินทนนท์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/LUCG0H5qkpQ/mqdefault.jpg)
Sorry Cole, but I laughed so much when the dust flew out. So relatable to doing these things at home and stuff you just don’t see on the editing tv shows !
What a stunning pick up!
With the nylon cup, I have had sucess drilling a hole in the centre, spraying in some penrating oil, and then getting the air compressor and blowing in the hole, and the nylon cup just pops out.
Came just in time - was debating on moving off of hydro suspension and there is just way more info on cones
Hydro can be really comfy if its all working properly but its certainly more work to maintain. I also wouldnt describe it as the most performance oriented configuration.
Awesome video, thank you
Thank you!!
Excellent topic and production as always. I need to do the rears but that it were more difficult, now I’ll have a crack at it. Thanks!
Appreciate the kind words. Thanks for watching and good luck on your rear cones. :-)
Thanks!
Thanks for watching!
Legend!!
Great video this is the next job I'm doing on my mini
One thing i would advise though.
Do not use the tie rod subframe mount to jack the car up on. I have seen these bend slightly especially if the jack is not positioned correctly and that ruins the suspension geometry
You are better off carving a block of wood to fit the front of the subframe so your axel stands can be positioned under the flats of the subframe
Regards
Simon
Cole
Great basic maintenance Video. Very useful. I did it about 12 years ago 😃.
Would a bump stops benefit the Swing arm movement before the dampers stop it. In both directions, pump and extension (just a few inches apart)?
Thanks for making this video for us and I am glad to see you making videos again. I have one quick question: for a Mini that is not used every day and maybe once a week, how often do you recommend adjusting the Hi Los (apart from the obvious sign of seeing the suspension lower than usual)? Thanks!!
Thanks for the kind words! Glad to be back making some vids. Hi-los dont really need regular adjustment unless you are seeing the suspension lower/sagging. They aren't a wearing point like bushings so as long as they are maintaining the height of the car, thats all that matters.
Great video. I personally have been a massive fan of the MiniSpares Red Spot cones. Just can’t go wrong with MiniSpares, really. Still curious how “stiffer” cones might feel when paired with the Quantum dampers sold by KAD, as I’ve been eyeing those for a while now.
Thank you! I don't think your cones will feel any stiffer really. The dampers help smooth large road jolts and assist with rebound. I found using the firmer settings on my protech shocks kept the tires in contact with the road much better and it made a dramatic impact on my cornering and mountain driving.
The cone compressor has an option of two threads. It wasn't mentioned in the video, but have you encountered the old style thread? According to minispares, all cones have been metric since 1976.
This must have been the root of my thread stripping issue. My Compressor was bought secondhand and only came with the SAE threaded rod.
@@classicminidiy Well, luckily they aren't that expensive! would recommend buying a thread checker set if you dont have one. Bought one along with a thread cleaning set (NOT a tap and die). Great for checking thread size and pitch, then following it up with cleaning the threads.
Is it possible to thread a nut and washer on the tool underneath the front cone prior to compression so rubber threads aren’t stripped?
Hey Cole, great video. Sorry about the thread issue, that is very frustrating.
On mine, I wanted to lower the car a bit for a more preferred stance. Seems like the previous owner already put in adjustable trumpets, so I just changed the distance between the nuts. Once everything was buttoned up, I went for a drive, and was hearing squeaking at my front right (RHD car). I double checked wheel rub, and it seems clearance is good. When I took the wheel off and felt around a bit, it seems like the Hilo can wiggle around in there AND my cone can spin in place and wiggle around (cone does not do this on other side). Is this an issue, or will it just re-seat itself once the car is lowered onto its own weight again. If so, how might I remedy this? Thanks for the help! Love the channel.
Strange, I replaced my old cones with MS EVO's a couple of months ago and thought they held up really well. The compression tool comes with two interchangeable threaded ends, metric and imperial. The EVO's are coarse metric thread. The imperial thread is much finer. Could you have used the wrong thread maybe?
I found there was a lot of excess rubber that gummed up the thread too so it helped to run the tool through them a few times on the bench. Copper-eze on the thread helps too.
I still have nightmares about that upper arm pin removal and reinstall. Not a fun job!
This must have been the root of my thread stripping issue. My Compressor was bought secondhand and only came with the SAE threaded rod. I have done the upper pin job on a few cars probably a dozen or so times and it genuinely never gets any easier/more fun. Hahaha
I was thinking exactly the same thing. So stripped the thread essentially, nothing wrong with the part itself, just the wrong compressing tool used for the new cones. Minispares Tool PN: 660330 is what you need, as it comes with both thread rods. The other tool they sell is Metric only. So I guess the one @classicminidiy had was imperial only - not seen one of those myself - OG maybe?
On my car had new standard cones and subframe overhaul but when car is on ground it’s hitting bump stops or just about touching
Shocks where only thing not replaced is that what’s causing it to not sit high enough ?
HELP
Off topic na mini owners what size batteries do you run
Did you have the right thread on the cone compressor?
This ended up being the culprit. The new evo cones moved to metric. Old ones were SAE
what are the differences between the hi-los available on the market? Or any issues picking up used?
The biggest difference I am aware of is the difference in knuckle joint post size. Minisport and specifically the smootharide hi-los use a non-standard size knuckle joint. So if you go that route, you have to always purchase replacement knuckles from them. Otherwise all the cone hi-los are essentially the same, just made with different materials.
Beautiful car! Are the wipers on backwards or did it not matter in the UK?
I believe they are backwards but in my opinion this orientation works better for RHD cars. Even though it’s technically incorrect. Lol
question i have red dot cones and protech shock with hilos. when you ran the protech shocks what settings did you use on the front and back that gave you the best ride?
Its been a bit since my initial setup but I think these are the settings I used. Both of these are how many clicks from the softest setting.
* Road - 6 clicks front / 4 clicks back
* Track - 8 clicks front / 6 clicks back
@@classicminidiy thanks. i had just like your road setting but with the red dots and short shocks it felt like it was riding on the cones only. i think now i have 9F and 7R rides a lot better but they just seamed high so i was trying to find out what others have set theres to.
@@troypowell1671 I think he's been on springs only since the protech shocks.
Coil springs are liable to snap if hitting speed bumps, or pot holes in any car. Its not so much an installation problem.
Us guys.......us guys......us guys......us guys.......us guys.......bye bye guys