How to change a locker cam lock

Lockertek TV video on how to change a standard locker cam lock.
check us out at lockertek.co.uk

[@rustledjammies8769]

Thanks for this video. It's a nightmare trying to get that horseshoe thing out, and even more of a nightmare trying to find out information on it. At least now I have a name and a method of removal.

[@brendafash2094]

Really good video, very clear and easy. thanks

[@healingpalmsca]

Thank you so much! It was really helpful!

[@110guided9]

Thanks for video

[@shella9558]

Wicked! Thanx mate👍

[@victoriaparker2255]

Thank you a lot!

[@triciap36]

THANK YOU SO MUCH

[@TexasGreed]

I have a lock like this but it doesn't have a screw holding on the tail. The tail is set inside and it just slides side to side when you rotate the key. Problem is I can't figure out how to install it because the locking nut can't fit over either end. The tail is too big to slip the nut over and so is the face.
I think I have to remove the tail somehow but I can't figure it out. Ever seen any like this?

[@HdhskgamingYT]

Thank you

[@lorettabyrd1492]

Thank you🙂💗

[@lockertektv8376]

You're welcome Loretta! Glad it could help you.

[@B3stclipzz]

Very useful

[@duartepaintinghandymanservices]

thanks!

[@lockertektv8376]

Amazing thanks for watching

[@pixelcrafttutorials7181]

Did you just thank yourself 💀

[@thunderchild2237]

Fitted cam lock on locker but key won't come out when in locked position but will come out when lever is up and locker unlocked
Advice?

[@moonsail0r23]

that type of locker stops you from opening the door towards the outside, but is there a way to stop people from punching the door towards the inside and stealing the things inside it?

[@CUNDUNDO]

Yes there is , first you measure the inside of the locker from the back to the edge of the door , find a piece of strong wood or cut it to measure even better would be a metal bar place it inside the locker across touching the back of the locker and the edge of the door, two on each side would make it even stronger.

[@AliceInTheWonderland]

Do i hv to remove it , each time i want to change the numbers?

[@nope24601]

And scratch the locker a good bit too.

[@IbzJaay19]

Is that a 16mm lock or a 20mm lock used in the video?

[@verityandjennysiaba6738]

Hi EJ, that’s a 20mm can lock

[@adl2005]

Ye but it's an instructional vid aimed at showing joe bloggs how to change something,if i showed my apprentices how to change a piece of glass with a sledge hammer they would think it correct and do it.
By the way the nylon hammers are cheaper at toolstation.

[@adl2005]

if you had used a nylon hammer you would not of shagged the paintwork on the door LMAO

[@lockertektv8376]

Thanks for your feedback, I'll ask my engineers to go to Screwfix and buy a nylon hammer. To be clear this video was for demonstration only and no customers lockers were harmed during it's production.

[@garzonlaperle9403]

Enjoy woodprix woodworking instructions.

[@steliosgkaz2690]

Dx

[@davidk3277]

I hate your intro music. Definitely won't subscribe.