I'm excited to see the integrated tail light for the mt-09. You guy always come out with the best lights and its worth waiting for something you know is good quality.
We have working prototypes that we are testing and still tuning some parameters. We can't commit to a launch date yet but we are closer now by a huge amount. Thank you for your patience. We actually have a lot of angry people contacting us thinking that we are dragging our heels with this project. In reality Yamaha takes about three years to design, test, and manufacture their technology....and look at the size of their workforce and enterprise. We are a tiny company out of Central Florida that typically takes a year to a year and a half to go from start to flaunch on a tail light project. So it is refreshing to read your comment and I had to throw you a thank you for your patience. Cheers!
Just a heads up, these are not plug and play outside the US. The US model has an extra power supply to feed the running lamps. If you want running lamps you have to run a seperate feed from elsewhere such as the headlight. Export bikes also have a different plug so the original plug has to be grafted onto the new indicators. Also don’t be fooled by wire colours black does not go to black, just to confuse us.
Just got done installing the TST taillights and full tuck undertail, tomorrow I’m going to finish up the front TST turn signal. also what mirrors are those CRG arrows? with rhino?
Love the video but I don’t have access to it where my bike is. Are there written instructions that I can use? I also ordered your full piece fender eliminator and the intergrated tail light. I searched your website and couldn’t find any. Thanks.
Les clignotant à LED sont-ils homologués ? Oui, pour autant : que le verre du clignotant porte l’homologation CE, donc un E avec code du pays (normes DOT ou autre non CE pas accepté); qu’il se mette à clignoter au plus tard 1 seconde après l’avoir actionné; qu’il clignote à une fréquence de 90 battements / minute (avec la tolérance, il doit s’allumer entre 120 et 60 fois par minute).
will these beauties pass safety inspection in Hawaii cause I really like them but I don’t want the hassle every time I go get safety check to swap out then swap back in a real PITA‼️😂
I'm looking for a vid on the installation of the blinkers at 13:50 but it seems there isn't one. I know the rack holes up a little higher do not go through so I was curious as to if you drilled them to pass wire through.
There is in fact a video for signal installation. Here is a link: th-cam.com/video/jbngLqSWBfM/w-d-xo.html The rear holes are blind. I did drill them out but I did not make instructions for that procedure because I can't undo damage to threads that impatient people are going to break when they attemp this. That hole is an M8. I used a drill bit that is smaller than the major diameter of the female M8 thread to punch through the inside wall there, while making sure I don't nick the threads. Then I ran the wires in. We have 3.5mm bullets on the end of those wires. I pass one through all the way and then the other so I don't have to pass bulk of two together.
Great product but a quick question is this compatible with the Australian version MT-09A website was a little confusing and would love a straight answer thanks again tst
We do not have access to International models and can only base our advertising for those models off of information shared on the internet and parts microfiches. Please check the turn signal connectors on your bike and compare them to the ones found on our product page.
Bonjour, j'aimerais savoir si votre produit correspond aux normes suisse ? ci-joint voici les normes suisses es que c'est ok ? Les clignotant à LED sont-ils homologués ? Oui, pour autant : - que le verre du clignotant porte l’homologation CE, donc un E avec code du pays (normes DOT ou autre non CE pas accepté); - qu’il se mette à clignoter au plus tard 1 seconde après l’avoir actionné; - qu’il clignote à une fréquence de 90 battements / minute (avec la tolérance, il doit s’allumer entre 120 et 60 fois par minute). Merci d'avance Smile
One kit includes the signals, connectors, and mounting hardware. That is all you need to perform the installation. You can verify what you are getting on our website by looking at "What's in the Box" photo, and also reading the "In the Box" tab. Those two sets of information describe exactly what you get by clicking "add to cart" on that page. Some of these parts also have nuances like a different connector for Europe and Americas. We have warnings for the parts that have shown to have these nuances. At that point it is up to the customer to verify theiir bike setup so that they can purchase exactly what they need. We also have customer service guys standing by to help with all this.
Question on the fasteners on the inside of the shroud that utilize a phillips head. On my bike they are not unscrewing, how do I remove these fasteners? I've tried to wedge a small flat head screwdriver behind but there is no room to get in there. I'm worried about damaging something by forcing it. Any ideas? Thanks in advance.
Typically what works best is getting your hand around to the backside and applying a squeeze around the barrel of that fastener as you are turning inner screw. But it sounds like you don't have space for that. Another option is to use tiny flathead and to pry up on the head of the screw fastener to ratchet it past the barrel threads. There is a likelihood of damaging the plastic fastener with this method if you aren't careful.
@@TSTindustries Thanks for responding. I did the small flat head screw driver trick and it worked but I did damage one fastener so I'll have to find a replacement. Turn signals are awesome and really fit the styling of the front of the bike. Looks way better then stock. Thanks again and keep up the great designs!
You're welcome. Sorry to hear about that fastener. Body shop and paint supply stores often have these in stock in different sizes and styles. Could be an option if Yamaha is expensive and with long lead time.
Hello. Somebody can help me please? Where is the Flasher unit (The relay) on the MT09 2021? I have to bypass it because my new sequentiel turn signals have the relay integrated. Thanks You!
@@TSTindustries :( I didn't know about the different between US model and International one. I received the order and turnout the OEM was 2 heads while the one I got 3-3 :(. I brought it to a workshop and they used the electric from the headlight so that the demi light can function properly.
Man, Yamaha really made a mess for us in the aftermarket industry with moving around connector models and what circuit is available at the connector for the front signals. The Americas bike is different than the European version. Currently we are getting around the issue using our 2-2 converters for that connector type (CVY02), along with a running light connection kit. We made a special product page for this on our website here: tstindustries.com/tst-mech-gtr-front-led-turn-signals-select-internation-yamaha-mt-models.html By the sound of things you already have the parts in your possession. In this case you probably don't want to shell out additional money for parts and shipping. There is a way to do a bit of wiring, reusing the wire and connector from your OEM signals, and then running a separate wire from a swithced and fused 12v supply to the remaining blue wire on our signals. This requires a bit more skill and understanding that the plug and play version, but we could continue the dialog with you to guide you through that if you want. This would have to take place in the customer service portal on our website though.
@@norbertkiraly85 If you're unsure of which kit to purchase, please email our Support Team with photos of your OEM turn signal connectors and they can try to point you in the right direction.
@@jimjones6106 OK, everyone can have an opinion. This video is an installation guide, so the thesis is inherrently based in the how. As a manufacturer of components we have chosen to provide instructions via video. I will leave the answering of "why" to our customers. There are plenty of videos posted by end users answering that question. -BR
I'm excited to see the integrated tail light for the mt-09. You guy always come out with the best lights and its worth waiting for something you know is good quality.
We have working prototypes that we are testing and still tuning some parameters. We can't commit to a launch date yet but we are closer now by a huge amount. Thank you for your patience. We actually have a lot of angry people contacting us thinking that we are dragging our heels with this project. In reality Yamaha takes about three years to design, test, and manufacture their technology....and look at the size of their workforce and enterprise. We are a tiny company out of Central Florida that typically takes a year to a year and a half to go from start to flaunch on a tail light project. So it is refreshing to read your comment and I had to throw you a thank you for your patience. Cheers!
Great product works just fine on the 2024 MT09 SP as well
Just a heads up, these are not plug and play outside the US. The US model has an extra power supply to feed the running lamps. If you want running lamps you have to run a seperate feed from elsewhere such as the headlight. Export bikes also have a different plug so the original plug has to be grafted onto the new indicators. Also don’t be fooled by wire colours black does not go to black, just to confuse us.
Just found out the hard way !
Just got done installing the TST taillights and full tuck undertail, tomorrow I’m going to finish up the front TST turn signal. also what mirrors are those CRG arrows? with rhino?
Awesome video! This helped me tremendously when I installed these yesterday on the SP. Keep it coming!
Great to hear!
Will these work on the rear? I want something different until you finalize the integrated tail light....
No
@@ThatCleanMT I don’t see why not? Besides the running light feature not working
Can you just change the front indicators and will it work fine with the OEM relay? Thanks.
It works no problem
Excellent video - as usual.
Thanks again!
Would this work with the XSR900?
dommage que les frais de port pour la france soit aussi cher que le produit.
Love the video but I don’t have access to it where my bike is. Are there written instructions that I can use? I also ordered your full piece fender eliminator and the intergrated tail light. I searched your website and couldn’t find any. Thanks.
We no longer provide written instrustions. We switched over to video instructions several years ago
Les clignotant à LED sont-ils homologués ?
Oui, pour autant :
que le verre du clignotant porte l’homologation CE, donc un E avec code du pays (normes DOT ou autre non CE pas accepté); qu’il se mette à clignoter au plus tard 1 seconde après l’avoir actionné; qu’il clignote à une fréquence de 90 battements / minute (avec la tolérance, il doit s’allumer entre 120 et 60 fois par minute).
Are any more designs comming out with the led ring? But longer
will these beauties pass safety inspection in Hawaii cause I really like them but I don’t want the hassle every time I go get safety check to swap out then swap back in a real PITA‼️😂
I'm looking for a vid on the installation of the blinkers at 13:50 but it seems there isn't one.
I know the rack holes up a little higher do not go through so I was curious as to if you drilled them to pass wire through.
There is in fact a video for signal installation. Here is a link: th-cam.com/video/jbngLqSWBfM/w-d-xo.html
The rear holes are blind. I did drill them out but I did not make instructions for that procedure because I can't undo damage to threads that impatient people are going to break when they attemp this. That hole is an M8. I used a drill bit that is smaller than the major diameter of the female M8 thread to punch through the inside wall there, while making sure I don't nick the threads. Then I ran the wires in. We have 3.5mm bullets on the end of those wires. I pass one through all the way and then the other so I don't have to pass bulk of two together.
Why you don’t put the signal on the mirrors both side
Great product but a quick question is this compatible with the Australian version MT-09A website was a little confusing and would love a straight answer thanks again tst
We do not have access to International models and can only base our advertising for those models off of information shared on the internet and parts microfiches. Please check the turn signal connectors on your bike and compare them to the ones found on our product page.
I had a problem with i purchased.. i'm from philippines. Cant contact your office
How to solve the problem of hole mismatch? The hole position on the motorcycle is 2.
Is this in regards to the connector?
Do you have any pointers or vids for installation on the mt03? I just purchased them but I only see instructional vids for the SP model.
th-cam.com/video/lJQuhF3RKLQ/w-d-xo.htmlsi=Bcq2geFDSqYEGldo
Is the harness converter included?
Bonjour, j'aimerais savoir si votre produit correspond aux normes suisse ? ci-joint voici les normes suisses es que c'est ok ?
Les clignotant à LED sont-ils homologués ?
Oui, pour autant :
- que le verre du clignotant porte l’homologation CE, donc un E avec code du pays (normes DOT ou autre non CE pas accepté);
- qu’il se mette à clignoter au plus tard 1 seconde après l’avoir actionné;
- qu’il clignote à une fréquence de 90 battements / minute (avec la tolérance, il doit s’allumer entre 120 et 60 fois par minute).
Merci d'avance Smile
Did I understand correctly that everything you installed is included in the kit? Or are any of the parts add ons?
One kit includes the signals, connectors, and mounting hardware. That is all you need to perform the installation. You can verify what you are getting on our website by looking at "What's in the Box" photo, and also reading the "In the Box" tab. Those two sets of information describe exactly what you get by clicking "add to cart" on that page. Some of these parts also have nuances like a different connector for Europe and Americas. We have warnings for the parts that have shown to have these nuances. At that point it is up to the customer to verify theiir bike setup so that they can purchase exactly what they need. We also have customer service guys standing by to help with all this.
@@TSTindustries got it thanks. Also, have you had any reports from customer of the lights falling out like the OEM ones? They’re an absolute nightmare
@@DG.2030 what you describe is not a symptom I have seen reports of.
Question on the fasteners on the inside of the shroud that utilize a phillips head. On my bike they are not unscrewing, how do I remove these fasteners? I've tried to wedge a small flat head screwdriver behind but there is no room to get in there. I'm worried about damaging something by forcing it. Any ideas? Thanks in advance.
Typically what works best is getting your hand around to the backside and applying a squeeze around the barrel of that fastener as you are turning inner screw. But it sounds like you don't have space for that. Another option is to use tiny flathead and to pry up on the head of the screw fastener to ratchet it past the barrel threads. There is a likelihood of damaging the plastic fastener with this method if you aren't careful.
@@TSTindustries Thanks for responding. I did the small flat head screw driver trick and it worked but I did damage one fastener so I'll have to find a replacement. Turn signals are awesome and really fit the styling of the front of the bike. Looks way better then stock. Thanks again and keep up the great designs!
You're welcome. Sorry to hear about that fastener. Body shop and paint supply stores often have these in stock in different sizes and styles. Could be an option if Yamaha is expensive and with long lead time.
Hello. Somebody can help me please? Where is the Flasher unit (The relay) on the MT09 2021? I have to bypass it because my new sequentiel turn signals have the relay integrated. Thanks You!
The relay is not a separate unit like on previous models. The flash controller is integrated into other electronics
why dont you put the instruction for the international kit!? still waiting for it
We do not have an international bike available to make the instructions with
@@TSTindustries :( I didn't know about the different between US model and International one. I received the order and turnout the OEM was 2 heads while the one I got 3-3 :(. I brought it to a workshop and they used the electric from the headlight so that the demi light can function properly.
Any help with how to install UK model?
Man, Yamaha really made a mess for us in the aftermarket industry with moving around connector models and what circuit is available at the connector for the front signals. The Americas bike is different than the European version. Currently we are getting around the issue using our 2-2 converters for that connector type (CVY02), along with a running light connection kit. We made a special product page for this on our website here: tstindustries.com/tst-mech-gtr-front-led-turn-signals-select-internation-yamaha-mt-models.html
By the sound of things you already have the parts in your possession. In this case you probably don't want to shell out additional money for parts and shipping. There is a way to do a bit of wiring, reusing the wire and connector from your OEM signals, and then running a separate wire from a swithced and fused 12v supply to the remaining blue wire on our signals. This requires a bit more skill and understanding that the plug and play version, but we could continue the dialog with you to guide you through that if you want. This would have to take place in the customer service portal on our website though.
I live in Germany, which one should I order? I can get 2 drivers...
Does your bike have running light function Infront signal lamps, or do they illuminate only during signal blinking?
@@TSTindustries It has a running light, I bought the bike 1 week ago, it has a plain turn signal
@@norbertkiraly85 If you're unsure of which kit to purchase, please email our Support Team with photos of your OEM turn signal connectors and they can try to point you in the right direction.
@@TSTindustries Thank you for your help
where can u get that windscreen?
Looks like an aluminum windscreen. Look it up on eBay or something
my question is why not how😂
I don't understand your comment.
-BR
@@TSTindustries the bike has perfectly good functioning led indicators from the factory 🤷🏿♂️
@@jimjones6106 OK, everyone can have an opinion. This video is an installation guide, so the thesis is inherrently based in the how. As a manufacturer of components we have chosen to provide instructions via video. I will leave the answering of "why" to our customers. There are plenty of videos posted by end users answering that question.
-BR
The Stock turn signal pop off quite often, especially When I need to put on rain cover everyday
Bad a$$