I love this. I spend so much time repairing cell phones that i have no more friends. Nobody to talk to. Now i can talk to my board heater. Very smart design
First off, I would like to express my gratitude for your thorough reviews on various heating devices and iPhone repairing tools. It's been extremely helpful because it saves me from wasting money on products that don't meet expectations based on how they are marketed versus their actual performance. In my experience with iPhone heaters, I have found quite similar results to what I have seen on this channel. The mechanic heaters all seem to be very slow and not the best, while the sunshine heaters also appear to be not quite as slow but still quite uncomfortable to use. Currently I am using the MiJing MS1 heater that is very similar to this i2c heater, with a few differences. Some of the differences I think are a little superior over this heater that you're reviewing is the way to clip in the plate is a little bit simpler than what is shown in this video, as well as just using the heater seems much more simple since there are only three buttons - one to set the time, one to set the temperature, and one to start the process. When using the heater, it also seems quite useful because it only runs for the set time you set it for, so if you get a phone call and walk away, forget about the board - this is not a problem since the heater reaches the set time and then turns off. I hope i2c will see your video and correct some of the issues you have raised. If they do that, it might be one of the best ones on the market. However, until those functions are ironed out a bit more, I am going to stick with my simpler heater.
Hey I buy stuff from you guys all the time. I love your website and it has helped me with alot of repairs. If i could make a request, Please update your website with information relating to the JC camera flexs no soldering and if they can be used for the iPhone 12 pro or not. They mention the iPhone 12 and the iPhone 12 pro max but not the base 12 pro model. When I have tried to replace the camera without message on a 12 pro the flex does not fit under the plate and I cannot find any information on the internet on how to deal with this problem. Please do a tutorial on this or make it clear on your website that the 12 pro is not supported for this fix.
It is available! You can buy it from here: www.diyfixtool.com/products/i2c-t20-intelligent-pcb-de-soldering-station-for-iphone-x-14-promax?ref=vccbr&variant=44070447153381
@@VCCBoardRepairs yea brother I love enjoy watch your video as well that's why I like to support your video with your awesome shirts that I like.., thank brother Jesse :)
In case someone is wondering - Pressing and holding two buttons together (left and right arrow) will turn off heat and turn on fan, so You don't have to summon Chinese Buddy :)
Which one would you choose from your experience. This one, iRepair MS1 or L2023? Need to replace my old iheater, it doesn't heat up well on 12+ boards. Also trying to avoid sandwich reball if at all possible, never had to reball X-11. Not the case with 12+ Thanks!
I love this. I spend so much time repairing cell phones that i have no more friends. Nobody to talk to. Now i can talk to my board heater. Very smart design
Agree
😃😁
I feel your pain 😅
First off, I would like to express my gratitude for your thorough reviews on various heating devices and iPhone repairing tools. It's been extremely helpful because it saves me from wasting money on products that don't meet expectations based on how they are marketed versus their actual performance. In my experience with iPhone heaters, I have found quite similar results to what I have seen on this channel.
The mechanic heaters all seem to be very slow and not the best, while the sunshine heaters also appear to be not quite as slow but still quite uncomfortable to use. Currently I am using the MiJing MS1 heater that is very similar to this i2c heater, with a few differences.
Some of the differences I think are a little superior over this heater that you're reviewing is the way to clip in the plate is a little bit simpler than what is shown in this video, as well as just using the heater seems much more simple since there are only three buttons - one to set the time, one to set the temperature, and one to start the process. When using the heater, it also seems quite useful because it only runs for the set time you set it for, so if you get a phone call and walk away, forget about the board - this is not a problem since the heater reaches the set time and then turns off.
I hope i2c will see your video and correct some of the issues you have raised. If they do that, it might be one of the best ones on the market. However, until those functions are ironed out a bit more, I am going to stick with my simpler heater.
I have that heater. I hate how tall it is lol
It's very responsive and heats up quickly, and what I like best is that it can turn on the fan by voice
Hey I buy stuff from you guys all the time. I love your website and it has helped me with alot of repairs. If i could make a request, Please update your website with information relating to the JC camera flexs no soldering and if they can be used for the iPhone 12 pro or not. They mention the iPhone 12 and the iPhone 12 pro max but not the base 12 pro model. When I have tried to replace the camera without message on a 12 pro the flex does not fit under the plate and I cannot find any information on the internet on how to deal with this problem. Please do a tutorial on this or make it clear on your website that the 12 pro is not supported for this fix.
I ordered one yesterday. Hope it works out. I got so many versions right now.
Great! Let us know how you like it in my group: www.vccboardrepairs.com/vcc-fb-group
I think two extra buttons would make more sense than to add voice commands complicating the device beyond the need.
I would love to see you upgrade an android storage and RAM. Underrated channel. Keep it up!
Thank you! I never do upgrades on Android phones.
What u think bro . Which is better XZZ L2023 or T20A I2C
??
Can't wait for it to be available in the UK
It is available! You can buy it from here: www.diyfixtool.com/products/i2c-t20-intelligent-pcb-de-soldering-station-for-iphone-x-14-promax?ref=vccbr&variant=44070447153381
I'm ready order one of your hoodie shirt today... fix sleep soldering black one... I'll keep you update today after 930am smile Jesse...
Great! You can purchase here
Https://merch.vccboardrepairs.com
@@VCCBoardRepairs just ordered
Appreciate the support! Thank you!
@@VCCBoardRepairs yea brother I love enjoy watch your video as well that's why I like to support your video with your awesome shirts that I like.., thank brother Jesse :)
Thanks for the video ❤️❤️🔥🔥🔥🔥
In case someone is wondering - Pressing and holding two buttons together (left and right arrow) will turn off heat and turn on fan, so You don't have to summon Chinese Buddy :)
Amazing! I'll give that a try next time
Do you have recommended temps for the different board models?
180C for X - 11
200C-210C for 12 - 14
@@VCCBoardRepairs Thank you!
Which one would you choose from your experience. This one, iRepair MS1 or L2023? Need to replace my old iheater, it doesn't heat up well on 12+ boards. Also trying to avoid sandwich reball if at all possible, never had to reball X-11. Not the case with 12+ Thanks!
I2c heater for sure
Whice one better xzz please?
I2c t20
Hey buddy ❤
Hi, what can I help you?
price?
I show the price within the first 2 minutes 😭
@@VCCBoardRepairs sorry and thanks!
This power plug is garbage. It becomes loose very quick.
Welcome to the world of china tools 😅
But it’s slow… or is there something I’m doing wrong?….
That's weird. I've heard a few people with that same issue. Maybe try contacting i2C for support
OK GOOGLE !!!
🤣🤣🤣 basically
i2c t20 heater is totally a garbage. This video is just promoted advertising.
It's not. I use it every day and everyone that has bought it from my recommendation has loved it too
What do you recommend?
Ridiculous heater. Simple is always better. I use XZZ L2023 and it's very nice
This is simple as well. The Voice Commands are optional