How to Replace Fuel Pump 2006-2012 Ford Fusion

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.พ. 2024
  • Buy Now!
    New Electric Fuel Pump from 1AAuto.com 1aau.to/ic/1AFPU01660
    This video shows you how to install a new fuel pump from TRQ on your 2006-2012 Ford Fusion.
    This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2006 Ford Fusion
    2007 Ford Fusion
    2008 Ford Fusion
    2009 Ford Fusion
    2010 Ford Fusion
    2011 Ford Fusion
    2012 Ford Fusion
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/obBa/1AXAA00013
    • Pocket Screwdriver
    • 8mm Wrench 1aau.to/oi6/1AXAA00011
    • 7mm Socket 1aau.to/obyK/1AXAA00017
    • Pliers
    • Ratchet 1aau.to/obYB/1AXAA00016
    • Socket Extensions 1aau.to/obVv/1AXAA00015
    • Cloth Rags 1aau.to/oKK/1AXSS00035
    • Gloves 1aau.to/oaMW/1AXSS00048
    • Rust Penetrant
    • Safety Glasses
    • Brass Punch
    • Drain Pan
    • Pick 1aau.to/oXY/1AXAA00037
    • Rubber Mallet
    • Wire Brush 1aau.to/owJ/1AXAA00079
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 5

  • @TRQ
    @TRQ  5 หลายเดือนก่อน

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @tfcdprogram5175
    @tfcdprogram5175 3 หลายเดือนก่อน +1

    everything done to my fusion has been taught to me from this guy❤️

  • @gottosahani7571
    @gottosahani7571 5 หลายเดือนก่อน

    Thanks for the video ❤

  • @woozieRu
    @woozieRu หลายเดือนก่อน

    What if the car is still Turning over well it crunk but it just instantly dies again after you replaced it?

  • @David-qw2iv
    @David-qw2iv 4 หลายเดือนก่อน +1

    This is not the same for the v6 models
    I hate how this channel never specifies on specific models of cars ever