ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2022
- Mazda Mx5 Miata , Eunos , the ultimate little budget two seater convertible sports car . In this episode we carry out the rust repair work and fabrication of new panels on the Mazda Mx5 Miata . Check out this video to find out what it is and to see it being brought back to life and transformed back to its former glory.
UPbuild Revivals is a new series. The object of this series is to take a car that is in need of some love or that would usually be headed to the scrap yard and to breathe life back into it, to get it back out there on the road for ourselves and others to enjoy again.
UPbuild Revivals is a series where we will be sharing all aspects of the car restoration and revival processes involved. Mechanics, welding, fabrication, interior, bodywork, painting, general maintenance and more. Doing the best quality of work on a modest budget, sharing the tips and tricks to get the job done.
So let’s crack on, we hope you enjoy the episode.
This post may contain affiliate links. If you click one of them, we may receive a small commission at no extra cost to you.
-----------TOOLS & MATERIALS -----------
-Starrett 18C Automatic Centre Punch with Adjustable Stroke: amzn.to/3WiFVpq
-Shrinker & stretcher tools: amzn.to/3UG1uPc
-Spray Can Trigger Grip Handle: amzn.to/3HOsfyp
-Simoniz tough black paint: amzn.to/3PmjltI
-Air Angle Die Grinder amzn.to/3G90qiK
-2inch Rust/Paint Removal Discs Fantastic! amzn.to/3v4SiK3
-2inch Ginder Discs amzn.to/3BRxAAY
-Rust Treatment: amzn.to/3YwqTOv
Huge thank you for watching.
Support The Channel:
If you would like to help support us you can do this by becoming a Patron at: / upbuild
UPbuild Merch Shop :
If you would like to support me and my dad with our Classic Mini Mk1 project or would like to take a look at our UPbuild products, please visit our shop and check out our great selection of merch here:
USA SHOP:
shop.spreadshirt.com/upbuild/all
Uk & European SHOP:
shop.spreadshirt.co.uk/upbuil...
Please Like, Comment and Subscribe.
Thank you very much for everyone that already have, my Dad and I greatly appreciate it.
Follow us on Instagram at: upbuildgarage
Contact us via email at: petrlhead@hotmail.co.uk
#mazdamx5 #carrestoration #projectcars - ยานยนต์และพาหนะ
The best time of the day sitting back checking out the work with a cold Beer in one hand talking to your dad. My dad past away some years ago I miss that special time with him. I feel this is not just a project but perfect time to spend with your dad.
I think that little car is very lucky to have avoided the wreckers. Great work lads.
Just like the British Sports cars of the 60's and 70's the MX5 was designed to emulate, MX5's do love to rust for fun!
Dad and lad , what a team , well done
Wow. You smashed that out! It would be great to see a caption every now and then to give an idea of time in hours or days. In my case it would be in years!
Wow. That was well on it's way to not passing inspection and ending up in the scrap yard! Great work. These are neat little cars.
I think I got as far as 16 minutes in and then checked how long the video was. Because I wanted it to go on for at least another half hour!
Really enjoyed this and looking forward to the next instalment.
Lot of work with fantastic results 👍🏻 Dads looking good especially with a beer 🤣
man what a lot of rust repair you and your dad are great keep it up Bill USA
What a fabricator and the welding good as well
Just started to watch your 3 posts on the red 2 seater. Your welding skills are fantastic
Amazing sheet metal work.
Absolutely astonishing..
Fantastic work guys, I still wish I had my MX5. It makes me really happy to see you working with your Dad, I wish mine was still around. 👍
Really looking forward to this build! Thank you both for taking the time to film, edit & post
Let me wish you, the legend and your whole family a very happy Christmas and a prosperous New Year. Looking forward to the next installment
You are an absolute wizard when it comes to sheet metal work. Amazing, simply amazing.
Mark - hugely impressive fabrication work. Very skilful and I really appreciate you sharing the skills and techniques. Looks a lot better!
Excellent fabrication and repair work ! True skills on show 👍
You deserve a medal mate!! A lot would of called it a teabag and binned it! Well done 👍
wow youre a true wizz with the metal work. love the down to earth shed content but also amazing standard.
Top notch for the fabrication work,weldone🙏🙏🙏🇬🇧🇬🇧🍺🍺
That’s some serious amount of work youv just achieved 😂 fair play to you
Very interesting.Great channel 👍😎
A job well done
Please, next time add a little music and voiceover while editing! Beautiful work by the way👍👍
Wow, that was a lot of work. I loved watching you make patch panels out of flat sheet steel. Nice job.
It my well have taken minutes, with hours of preparation, if I need a body shop i'm bringing my car to you. Some smashin work here. p.s. the hat is great in this cold part of Britain (Bolton)
what a cracking job , very impressed
The level of craftsmanship is insane massive props to yourselfs well done
Wow it’s a good job your handy with a welder, some skill shown right there
Cracking fab work lads. You make it look so easy. But i know it takes years of practice.
Really looking forward to the next video, where there might be less timelapse and more detail as to the tips & tricks you've used to make and fit the repair panels.
Great work - must be great having your Dad there assisting you and doing the camera work.
It would be good to know how much time you've put into the different stages of of your Revival Projects. Fantastic idea doing the UPbuild Revivals. 👍👍
Excellent work ,you’re bringing back from the dead. Love it.
what an effort. Well done
Ok - I'm hooked.
When I saw that rust I thought, this one is a bit more challenging, but it turned out really nice. Big 👍
Always nice to see you two at it once again!😄😄
Cracking bit of fab work lads.!
Fair play to ya’s even taking it on, I’ve scrapped cars with way less rust than that.!
Great high standards of fabrication I also watch a channel call yorkshire restoration and they focus on mazda mk models keep up the good work lads
A talented team, great video
Those corners and rear arches and jacking points seem common I watch Yorkshire car restoration amount they have done baffles me
Great work as always Japanese rust bucket dun great job 👍👍
you're really showing off your skills now brilliant seeing you both again
That looked intense 😳 😬. You smashed it out of the park though 👏🏻. Loved how you brushed the epoxy on 👍🏻, about 20yrs ago we started to use a roller for highbuild, just never got into it. The brush looks easier. Great job. I'll be sharing this with my daughter to show her how much work goes into the rear qtr alone.
Amazing!! Felt like I was watching Fitzee work on Crusty... a serious amount of work on this thing... and it's not like you are a fully equipped body shop, you know? Thanks for sharing... it is inspiring to see it done without a half a million dollars worth of equipment. Determination and elbow grease does it again.
Great work lads. I’ll bet you had a good drink after doing all that work. Great bit of welding Mark . Keep the video’s coming lads. 👍👌
Fantastic work, I appreciate the skill and time needed to clear out and replace the rusty metal, the time lapse doesn't do the work justice. Great work by you and your dad, always enjoy watching you work together, its a great team. I remember spending many hours in the UK repairing rusty panels for MOT's, but now living in Australia rust isn't generally such a major issue. Looking forward to the next episode.
Good work.
Nice job Mark, I've seen professional jobs that are not as good as that. Particularly the plug welds, very neat and consistent. Well done.
You are one of the best fabricators in the motor industry and the only one to watch, but watching you content without sound is greatting please some light music?
Good work
great work guys, wow your brave taking on that amount of welding, watching reminds me of doing/restoring things with dad he be supervising from his chair
Not shown, but what did you use as seam sealant, before you sprayed the Gravitex type underbody coat. I slowed the playback to 50%, to get a better understanding, but great job and I always enjoy your posts, even though I will never get to do this type of repair. Hi to Dad and great to see your "Team" at work.
Very skillful metalworking 👍
Great work and a great video thanks for sharing it with us.
Great video as ever guys that lower quarter repair reminds me of what I had to do to mine. It’s a common area apparently. You have absolutely smashed through those repairs
Great job on the fabrication & welding, Welding upwards lying on your back is a hard difficult task.
Epic task ahead gents..
Have you taken any tips from the Dad and son team over at Yorkshire Restorations? Those boys are brave...!!
Brilliant, too bad I'm on the wrong side of the pond or I'd be keen to purchase that when y'all are done.
I was looking forward to this, You certainly don’t do things by halves, incredible fabrication & a very lucky MX5 that lives again
Rust is a problem driving on U. K. roads,just don't see a rusty MX5 here in Australia. Great work, someone should make zincanneal repair panels for more common areas!
Good job. 👍👍
Hi Mark - just wanted to wish you and Dad (and wider family of course!) a very happy Christmas and a great New Year. I have loved watching your videos and also picking up tips for my own car refurbishment works. Thank you both!
Must admit, once you started uncovering the full extent of the rust, i'd have give up! Fair play to your fabrication skills and tools for the job, looking forward to next video.
When is the mini getting its next stage? I miss it.
Very good work, please activate the subtitles, greetings.
New subscriber an absolute fantastic video mate can't wait for the next
Fantastic work fellas 👏👏👏👏 great to see another car being saved
That’s a power of work gone into the mx5 but great metalwork and looks good
Fantastic work lads love this channel
Top job done well done be worth it in the end keep it up
Absolutely brilliant, guys!
Well done nice job.
Cracking job fella's. Keep up the good work. Only wish I could do that 👍
Flippin' brilliant! You worked really hard and did a great job too. Well done!
Looking good fellas, can't wait to see the next episode, great stuff.
Great vid guys well done 🎉
Great fabrication work. Can’t wait to see the other side in the next video. Keep it up guys. 👍
Great work keeping another one on the road 👌🏻
I thought the boys at Binky were excellent fabricators,but watching your progress through the Mk1 mini project up until now ,I have to say you are second to none.Well done.One question though,what was the time frame for the side just completed?Looking forward to the next post.
I absolutely love your videos. Keep up the fantastic work guys.
Very much enjoyed the video but found alot of the time lapse difficult to follow sadly. If ever there was a film to put someone off MX5’s - this is it !
Keep up the good work & thanks 👍
Hi! Cheers 👍. Yeah there was a bit of rot. Watch out for the next weeks episode, it’ll be a good bit longer but we’ll have loads more detail in that one.
Regards
Mark.
@@upbuild4397 always a good watch Mark - Merry Christmas to you both 👍
awesome
Very impresive work. Big well done 👍
Great vlog and a good watch 👍.
Seems like a lot of work, it looked a bit of a scraper to me!!
Skillz.
Hi. amazing work guys ,well done. Many thanks.
I'm loving this concept of video, the time lapse and getting through the entire project in a few videos instead of a few years.... Think you two have found a niche!! Keep at it. I watch Binky, Soup, Retropower, Super Fast Mat, and you! I reckon you'll be getting more followers soon!
Fantastic!
Amazing you lads are brilliant thanks ❤😊👍
Good work lads, well done. I think the Fiesta is going to look like easy money compared to this one.
Wow some great bodywork there, is that your trade?
The colour scheme is reminiscent of a 1960s Lotus Elan.
Hi. I’m pleased you liked the video 😁👍, thanks for commenting. My work has nothing to do with cars but my whole family have always loved and worked on cars so I have just picked things up over the years mostly for my Dad.
Regards
Mark
nice, really good video too! i needed this to help me fix imne! ill try uploading something on my channel too!
Fair play lads, real nice job of those repairs!! I’m fairly new (few months) what’s your background work wise, you’ve clearly got a talent here and take great pride in your work!
top dogs!
I have never seen anyone use a piecost like that before.
Hi.
Where have you gone? Been waiting for update video on the channel.
I hope everything is ok & you are both well.
We miss your videos!
👍👍👍👍👍👍👍👍👍👍
I am very disappointed with this vid. There was absolutely no pizza box CAD work! hehe
Joking aside, your fabrication work is absolutely top notch. There are many "professionals" out there that are incapable of the workmanship that you do.
Well done indeed! 😃
That was a neat repair and enjoyed the clip heaps. How long did the whole right side repair take..??