I just watched it and I'm willing to give it a try. My van set up would be the one at the second part of the video, through the nav screen. Where do you suggest the camera and module be purchased from?
@@jeffreyruck552 Thanks! I'll reach out. Quick question tho - In the video, it looks like you are showing two different applications for the monitor. One on the rear view mirror and one integrated in the nav screen. With the mirror application there is the module packed into the cavity under the A pillar. But with integrated system, there is not that module, right? Or is the integrated system a continuation of the wiring set up? I have a 2014 MB Sprinter with the Nav screen and I'd like to utilize that. Thanks in advance.
Not all Mercedes Sprinter vans are created the same my fuse box is under the driver's seat. The reversing lamp power wire is blue with a white stripe which runs in the van loom. I took a tap off the blue and white striped wire to power the relay. Hence the camera and monitor is only active when the van is in reverse.
im not sure what camera system you are using but, the blue reverse trigger wire is only used for turning the camera image on and off. if you connect the blue wire to a constant 12v source the camera image will always display when the system is turned on. if the Fakra cable is not connected to the green plug in the back of the radio you will not see an image.
The MB dealer let us know our radio is camera ready. Who's kit are you installing in the TH-cam video? I prefer not buying NAV-TV kits as they are lots $$.
We use our own kit that we have built, based off of the Nav tv part# NTV-KIT477. If you are located in the NY metro area, we would be glad to sell and install our kit.
Hi just wondering if u know which fuse its for side mirrors for a 07 dodge sprinter 2500 , i cant make it work any of the side mirrors , i replace them, also i did replace the switch in the door and still doesn’t work i checked all the fuses and all of them are good , also if im right fuse 13 its for mirros and its good , any thoughts would help , thanks
Sorry i have never worked with the mirrors on the sprinters, so i dont know much about them. If you have put new mirrors on the vehicle and they are an electronically related item, you might have to take the vehicle to the car dealer to program the PCM to recognize the mirrors
Can this camera be connected to the factory non-NAV head unit? I'd like to view the camera on my factory screen if possible. It seems I would need a new 18 pin Molex harness and "facor" cable? Where can I get those? Once all that is done it would have to be programmed? Thanks in advance.
If the vehicle doesn't have the large factory LCD screen you will not be able to install the camera unless you upgrade the radio. i would suggest just going with the 7" aux monitor and camera system.
This wiring harness comes with the camera kit. Contact these guys if you need to buy parts Advantage Outfitters (866) 925-4844 www.advantageoutfitters.com
the ones we use are Rear View Safety www.rearviewsafety.com/rvs-916619-backup-camera-system-sprinter-backup-camera-system.html the one using the factory screen is a kit sold through www.commercialvanshelving.com/
How do I get ahold of you? Can you provide the kit #, the kit content, the specs and the cost so I can review it? We'd install it as ourselves as we are in Michigan.
You can call our main line at (866)925-4844 or email us at sales@advantageoutfitters.com for more info. You can reach me at (866)925-4844 ext.113 for any technical support questions.
Guy's I just watched that whole video to learn how to pick up the feed frome the white wire blue stripe and you just held them together and said they get joined! Lol! BUT HOW DO YOU JOIN THEM! LOL!
Paul Roe- sorry for not showing that part, as it is a bit tricky to do in the tight space there.... I butt spliced them together, using the same tools and methods that i used for connecting the ring terminals and add a line fuse holder. You should be able to find videos for Butt splicing wires with a Butt connector in more detail somewhere....
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
Big help. Thanks!
You are very welcome!
Thanks so much. Do you know the buttons to push to get into the engineering mode of the radio?
Sorry, I do not. Anything regarding programming the radio itself will need to be done by the dealer
thank you
2012 viano programming would be the same please?
factory sat nav unit
Sorry, I dont know...
where yuo connected the blue cable ,how yuo program the camera ?
that part is not clear at all .the kit dont can with that blue cable .
there should be a blue wire labeled input2 that needs to connect to a 12v power source temporarily while you program the camera...
I just watched it and I'm willing to give it a try. My van set up would be the one at the second part of the video, through the nav screen. Where do you suggest the camera and module be purchased from?
Email brendan.ruck@advantageoutfitters.com he should be able to hook you up with the extra parts needed for install. Thanks for watching!
@@jeffreyruck552 Thanks! I'll reach out. Quick question tho - In the video, it looks like you are showing two different applications for the monitor. One on the rear view mirror and one integrated in the nav screen. With the mirror application there is the module packed into the cavity under the A pillar. But with integrated system, there is not that module, right? Or is the integrated system a continuation of the wiring set up? I have a 2014 MB Sprinter with the Nav screen and I'd like to utilize that. Thanks in advance.
With the OEM navigation you will need to buy a module but it is only for programming purposes.
Not all Mercedes Sprinter vans are created the same my fuse box is under the driver's seat. The reversing lamp power wire is blue with a white stripe which runs in the van loom.
I took a tap off the blue and white striped wire to power the relay. Hence the camera and monitor is only active when the van is in reverse.
What year sprinter is this for?
@@jeffreyruck552 2012
Thanks
blue cable can be the antenna Fakra with the blue cable connectec to 12 v ?
im not sure what camera system you are using but, the blue reverse trigger wire is only used for turning the camera image on and off. if you connect the blue wire to a constant 12v source the camera image will always display when the system is turned on.
if the Fakra cable is not connected to the green plug in the back of the radio you will not see an image.
Buen vídeo, gracias.
Hi
The MB dealer let us know our radio is camera ready. Who's kit are you installing in the TH-cam video? I prefer not buying NAV-TV kits as they are lots $$.
We use our own kit that we have built, based off of the Nav tv part# NTV-KIT477.
If you are located in the NY metro area, we would be glad to sell and install our kit.
Rear View Safety
Hi just wondering if u know which fuse its for side mirrors for a 07 dodge sprinter 2500 , i cant make it work any of the side mirrors , i replace them, also i did replace the switch in the door and still doesn’t work i checked all the fuses and all of them are good , also if im right fuse 13 its for mirros and its good , any thoughts would help , thanks
Sorry i have never worked with the mirrors on the sprinters, so i dont know much about them. If you have put new mirrors on the vehicle and they are an electronically related item, you might have to take the vehicle to the car dealer to program the PCM to recognize the mirrors
Can this camera be connected to the factory non-NAV head unit? I'd like to view the camera on my factory screen if possible. It seems I would need a new 18 pin Molex harness and "facor" cable? Where can I get those? Once all that is done it would have to be programmed? Thanks in advance.
If the vehicle doesn't have the large factory LCD screen you will not be able to install the camera unless you upgrade the radio. i would suggest just going with the 7" aux monitor and camera system.
thank you
no problem, sorry for the delay in replying
no problem, sorry for the delay in replying
Where do you get the 18pin harness and the other adapters you referred to?
This wiring harness comes with the camera kit. Contact these guys if you need to buy parts Advantage Outfitters (866) 925-4844 www.advantageoutfitters.com
Where can I get the 18 PIN Molex wire harness adapter?
Call Advantage Outfitters at 8669254844 and ask for Brendan
Simple as that 😮
what camera manufacter the yuo used ? I has the factory screem
the ones we use are Rear View Safety
www.rearviewsafety.com/rvs-916619-backup-camera-system-sprinter-backup-camera-system.html
the one using the factory screen is a kit sold through www.commercialvanshelving.com/
All I see is on this website is shelving products... where would i find the 18 pin molex? thank you!
You can call our main line at (866)925-4844 or email us at sales@advantageoutfitters.com for more info.
How do I get ahold of you? Can you provide the kit #, the kit content, the specs and the cost so I can review it? We'd install it as ourselves as we are in Michigan.
You can call our main line at (866)925-4844 or email us at sales@advantageoutfitters.com for more info.
You can reach me at (866)925-4844 ext.113 for any technical support questions.
What do the parts cost to buy?
Contact these guys and they can help you out. Advantage Outfitters (866) 925-4844 www.advantageoutfitters.com
Guy's I just watched that whole video to learn how to pick up the feed frome the white wire blue stripe and you just held them together and said they get joined! Lol! BUT HOW DO YOU JOIN THEM! LOL!
Paul Roe- sorry for not showing that part, as it is a bit tricky to do in the tight space there.... I butt spliced them together, using the same tools and methods that i used for connecting the ring terminals and add a line fuse holder. You should be able to find videos for Butt splicing wires with a Butt connector in more detail somewhere....
Where is your address ?
00.23 Убил бы за такое
Thanks
No problem! lmk if I can provide any more assistance.