These are great for a smooth concrete floor but throw any gravel or asphalt into the mix and these bad boys just dig in and wont budge!! They should look at doing some with some supper chunky wheels that can spread the load and maybe even go over chippings or scalpings... just a thought
Good part about the sunnex being 2 piece on the cross bars is that if they gent bent you can replace those. I drive a flat bed tow truck and I've seen guys bend these up and you'd need some serious work to straighten them back out and even then they still wouldn't be as strong as they were originally. I have actual go jacks on my truck and mine were decent but I traded the guy that drives the snatcher because he had bent his up some pulling out really heavy trucks.
What a pity you didn't upload the "next video". I'm very interested in your results. Did you happen to complete it, and upload it to another platform that I can go to, to see, please?
The machining isn't the problem.the paint or powder coat is affected by gravity that's why it's tight on the top and doesn't fit in the bottom you can see the extra paint in the hole
I would go with the real go jacks one's the one's you have now you could use them for changing tires on your car so you wouldn't have struggle lifting the tire easy off easy on
These are great for a smooth concrete floor but throw any gravel or asphalt into the mix and these bad boys just dig in and wont budge!! They should look at doing some with some supper chunky wheels that can spread the load and maybe even go over chippings or scalpings... just a thought
Good part about the sunnex being 2 piece on the cross bars is that if they gent bent you can replace those.
I drive a flat bed tow truck and I've seen guys bend these up and you'd need some serious work to straighten them back out and even then they still wouldn't be as strong as they were originally.
I have actual go jacks on my truck and mine were decent but I traded the guy that drives the snatcher because he had bent his up some pulling out really heavy trucks.
What a pity you didn't upload the "next video". I'm very interested in your results. Did you happen to complete it, and upload it to another platform that I can go to, to see, please?
agree, would really like to see comparison in action.
The machining isn't the problem.the paint or powder coat is affected by gravity that's why it's tight on the top and doesn't fit in the bottom you can see the extra paint in the hole
Nice I suppose but I need off road versions
Tried the sunnex and I couldn’t move my car on an asphalt driveway. Interested in whether vevor works as sunnex was just wide enough.
Quality of the casters?
I would go with the real go jacks one's the one's you have now you could use them for changing tires on your car so you wouldn't have struggle lifting the tire easy off easy on
I stumbled across this video because a local guy is selling 4 of the vector jacks but they're the hydrolic versions.
He wants $225 for all 4.