You know how us tool Addicts are brother. We have to have it 😆. Seriously, we all know XGT was aimed at the contractor needing high demand battery powered tools. Huge cut off saws, breakers, SDS rotary’s and things off that nature run way more efficient on higher voltage. To keep everything on one battery platform they had to incorporate impacts and drills along with XGT instead of having to use LXT batteries as well. Makes sense but us smaller construction businesses like 40volt too lol. Thanks for the in depth review Taylor. Really enjoyed it as always brother ✊
@@TinkerWithTools you are the authority on the subject Mikita XGT. So dude is the XGT Planer the best is the world? I won't ask SoAlz because his Ridgid rose glasses make him an idiot to Mikita.
I can see your right with the power settings limiting them. The platform does seem to be oriented towards the higher draw cut tools, circular, reciprocating, etc. Will be interesting to see in their twin pack 40’s if they’ve let it draw more from the batteries.
And just think. I have a couple of M12 Milwaukee impact driver/wrenches that will hang right beside these 36(aka40) volt Makitas. It is all marketing hype. Fall for it if you want to but I just buy good tools period. Makita 18volt, Bosch cordless miter saws and so on. Just bought all three 36 volt Metabo Hpt saws and their 36 volt hammer drill to try. Impressed so far. The reason I bought the Bosch 10 inch 18volt miter saw is the weight. 39 pounds in a dual bevel slide 10 in saw is pretty hard to beat and I have found their saws to be accurate enough for high end Mahogany trim work.
On the impact drivers I would say you are correct. In fact while I love my XGT impact driver the LXT performs better. The hammer drill is a different story though. On a tool like that you won’t see an 18x2 drill and the XGT model has numerous improvements. I have the LXT and XGT saws and the performance is pretty similar but only having one battery changes the ergonomics for the better IMO. To each their own though. They aren’t for everyone and I get that. With any tool company there will be a fair amount of marketing. As long as you like the tool then I say go with that.
I think XGT is about answering that the worst things to be underpowered in are the big things where you can’t or don’t want to move what you’re working with. Drills and impacts are just about personal preference at this point.
I am glad they didn’t. I get the appeal of having a battery that can serve both types of tools and I have both Flexvolt and MultiVolt tools that do this but I have heard many people complain of both battery and tool failures when you have it switching voltages. It sucks to have to buy multiple sets of batteries but I do think it’s the better solution long term.
The XGT tax on top of the LXT equivalent (or any 18V/20V option for that matter) isn't worth it unless you get power hungry tools like circ saws, sawzalls, SDS rotary hammers and angle grinders. But I think I'd be better served by going 2 platforms and keeping both the hammer drill and impact driver as 18V
Item for discussion: if I’m not off-base here increasing the voltage won’t do much aside from exchange volts for amps at a set equation and run significantly cooler. I think the ceiling for the amount of volts+amps is raised significantly making that jump but I’m not sure it’s worth much until they’ve added higher voltage + super high output batteries
I am by no means an expert when it comes to the science/math behinds amps and volts, but what I will tell you is this. XGT isn't about the small tools like an impact driver for example. But the even the drill is a noticeably different tool on XGT than on LXT even though the specs like torque are similar. But the real long game for Makita is going to be higher demand tools like you are starting to see coming out and with that the bigger batteries.
@@TinkerWithTools you’re absolutely correct that seems to be the idea behind all the higher volt lines mx fuel etc! But a lot of folks seem to have the idea that their smaller demand tools will be greatly increased in power. Which I imagine makita, Milwaukee, etc etc have no interest in correcting that error in thought process lol!
The XGT drill is absolutely more powerful than the predecessor. In fact, it’s almost too powerful and that’s why I think it comes with anti-kick back technology to not break anyone’s wrist out there. Probably one of the most powerful hammer drill drivers on the market today. The impact driver is okay, but what I really think stands out most about it most is the 40v platform which allows you to do more work for a longer period of time (more voltage equals less discharge on the battery). Overall, the XGT line is pretty impressive but the price point scares a lot of people off. And people like Team Red because they’re trendy tools.
In my opinion the biggest draw of XGT is the potential for bigger more powerful stuff. Impact drivers are just there so it can be your one your one platform.
Except for the fact that it isn't 40 volts. It is 36 volts. Says so on back of the battery. All makita did was move to a single battery platform for their 36 volt tools. Where they screwed their current 18volt users is they didn't make the batteries multivolt like Dewalt and Metabo HPT. huge mistake in my opinion.
makita lxt drill had issues with broken drills in overload, even the bruschless. we have alot broken drills i think over 20 in a year i think. the protection on xgt is nice to keep the wear on drill and it has more then enough power for proffesional use. no one need so much torque on home use and on jobside in my opinion.
@@harlanborders943 I'm don't know if in your country the xdt19 have appeared but if you want td172 just wait to buy xdt19 that will be the next generation of Makita 18v impact driver after td171/xdt16
It will go through it. This was when the tool was brand new and I think sometimes they just need a little breaking in. But I have had testing sessions where it goes through just about everything I throw at it.
This is correct. They refer to the max voltage when they say 40 volt. It’s just like DEWALT calling their tools 20v max instead of 18v like everyone else.
While I haven’t yet done a head to head comparison of the the two (I only have the XDT16) the 40v impact driver didn’t feel substantially stronger than the 18v. Unless you are going to get the higher power draw tools like saws and such I think the XDT19 would be a great choice too. You can’t go wrong with either.
Do I want too? Yes. Did I immediately shit myself seeing a drill, impact and 2 batteries for something like 450 CAD plus 15% tax? Also yes. Definitely sticking with my brushless ryobi lmao
Depending on the tool model. For example, I bought the XDT19 impact driver for about 105 recently. The drill have never looked into tool only but I am sure it's out there on other sites for a decent price.
You know how us tool Addicts are brother. We have to have it 😆. Seriously, we all know XGT was aimed at the contractor needing high demand battery powered tools. Huge cut off saws, breakers, SDS rotary’s and things off that nature run way more efficient on higher voltage. To keep everything on one battery platform they had to incorporate impacts and drills along with XGT instead of having to use LXT batteries as well. Makes sense but us smaller construction businesses like 40volt too lol. Thanks for the in depth review Taylor. Really enjoyed it as always brother ✊
The stuff is premium and the drill is an upgrade. The impact is nice just not significantly nicer than the LXT. Thanks for the support man!
@@TinkerWithTools of course buddy
@@TinkerWithTools I just downloaded Epidemic sound like you use. Way better music than my editor offers. Thanks for the introduction on that man✊
@@IMPACT-NATION it’s worked well for me. I am trying to use it more and more
@@TinkerWithTools you are the authority on the subject Mikita XGT. So dude is the XGT Planer the best is the world? I won't ask SoAlz because his Ridgid rose glasses make him an idiot to Mikita.
I can see your right with the power settings limiting them. The platform does seem to be oriented towards the higher draw cut tools, circular, reciprocating, etc.
Will be interesting to see in their twin pack 40’s if they’ve let it draw more from the batteries.
And just think. I have a couple of M12 Milwaukee impact driver/wrenches that will hang right beside these 36(aka40) volt Makitas. It is all marketing hype. Fall for it if you want to but I just buy good tools period. Makita 18volt, Bosch cordless miter saws and so on. Just bought all three 36 volt Metabo Hpt saws and their 36 volt hammer drill to try. Impressed so far. The reason I bought the Bosch 10 inch 18volt miter saw is the weight. 39 pounds in a dual bevel slide 10 in saw is pretty hard to beat and I have found their saws to be accurate enough for high end Mahogany trim work.
On the impact drivers I would say you are correct. In fact while I love my XGT impact driver the LXT performs better. The hammer drill is a different story though. On a tool like that you won’t see an 18x2 drill and the XGT model has numerous improvements. I have the LXT and XGT saws and the performance is pretty similar but only having one battery changes the ergonomics for the better IMO. To each their own though. They aren’t for everyone and I get that.
With any tool company there will be a fair amount of marketing. As long as you like the tool then I say go with that.
I think XGT is about answering that the worst things to be underpowered in are the big things where you can’t or don’t want to move what you’re working with. Drills and impacts are just about personal preference at this point.
Well said. The drill is more powerful and faster than the 18v the but impact is more of the same.
Imo they should have made the batteries backwards compatible to the 18 volt range ,this iscwhy I chose Dewalt and love their XR/FLEXVOLT TOOLS
I am glad they didn’t. I get the appeal of having a battery that can serve both types of tools and I have both Flexvolt and MultiVolt tools that do this but I have heard many people complain of both battery and tool failures when you have it switching voltages. It sucks to have to buy multiple sets of batteries but I do think it’s the better solution long term.
Yes it is but hard to explain to most people. Let's just say XGT has alot of room to be stuffed with innovations and the LXT room is pretty full
Never heard it put that way. Thanks!
The XGT tax on top of the LXT equivalent (or any 18V/20V option for that matter) isn't worth it unless you get power hungry tools like circ saws, sawzalls, SDS rotary hammers and angle grinders.
But I think I'd be better served by going 2 platforms and keeping both the hammer drill and impact driver as 18V
I can agree with that. I will say though that the more testing I do on the hammer drill the more it’s becoming my favorite. It’s simply awesome!
I like the rainbow loom bracelet!
for some reason I like the Makita Hammer drill 40v But my favorites impact driver from makita is 172 18v not 40v
Yeah I just don’t think they impact benefits from the 40v.
Item for discussion: if I’m not off-base here increasing the voltage won’t do much aside from exchange volts for amps at a set equation and run significantly cooler. I think the ceiling for the amount of volts+amps is raised significantly making that jump but I’m not sure it’s worth much until they’ve added higher voltage + super high output batteries
I am by no means an expert when it comes to the science/math behinds amps and volts, but what I will tell you is this. XGT isn't about the small tools like an impact driver for example. But the even the drill is a noticeably different tool on XGT than on LXT even though the specs like torque are similar. But the real long game for Makita is going to be higher demand tools like you are starting to see coming out and with that the bigger batteries.
@@TinkerWithTools you’re absolutely correct that seems to be the idea behind all the higher volt lines mx fuel etc! But a lot of folks seem to have the idea that their smaller demand tools will be greatly increased in power. Which I imagine makita, Milwaukee, etc etc have no interest in correcting that error in thought process lol!
Havent watched the first 30 seconds, but yes, Makita XGT tools are well worth the money!
Out of all the tools so far, my favorite is their dust blower.
I’ve been looking at it. I hate buying into a new platform but then once you do it opens so many doors!
@@TinkerWithTools if I had a choice, I would stick with XGT and Metabo HPT
The XGT drill is absolutely more powerful than the predecessor. In fact, it’s almost too powerful and that’s why I think it comes with anti-kick back technology to not break anyone’s wrist out there. Probably one of the most powerful hammer drill drivers on the market today.
The impact driver is okay, but what I really think stands out most about it most is the 40v platform which allows you to do more work for a longer period of time (more voltage equals less discharge on the battery).
Overall, the XGT line is pretty impressive but the price point scares a lot of people off. And people like Team Red because they’re trendy tools.
In my opinion the biggest draw of XGT is the potential for bigger more powerful stuff. Impact drivers are just there so it can be your one your one platform.
I haven’t used their 10 1/4 saw but I bet it’s a beast.
Except for the fact that it isn't 40 volts. It is 36 volts. Says so on back of the battery. All makita did was move to a single battery platform for their 36 volt tools. Where they screwed their current 18volt users is they didn't make the batteries multivolt like Dewalt and Metabo HPT. huge mistake in my opinion.
makita lxt drill had issues with broken drills in overload, even the bruschless. we have alot broken drills i think over 20 in a year i think. the protection on xgt is nice to keep the wear on drill and it has more then enough power for proffesional use. no one need so much torque on home use and on jobside in my opinion.
I had a clutch problem on my LXT but it was handled quickly by the warranty. Other than that, no other issues on the LXT or the XGT lineup.
i like xgt.
40 v makita's, drills tools are very best tools ...all the best ,.....like it , very much ...
I want one of the 172 impact drivers from Japan . That’s what I wish would come to the U.S. it seems as strong or stronger than the 40 volt system .
U can buy the Makita td172 at Us is xdt19 the difference between them just the collect
Makitas impact drivers all feel very similar. They are very nice! Just not the class leading performance.
@@QuockhanhPham20 no sir that’s the 171 it’s the 16 xdt
You were on the money dam Home Depot’s don’t have them but found them at tool nut thanks for the info
@@harlanborders943 I'm don't know if in your country the xdt19 have appeared but if you want td172 just wait to buy xdt19 that will be the next generation of Makita 18v impact driver after td171/xdt16
Wow I couldn't believe it cut out on the 1 1/4" speedbore my dcd 805 blitzes that .
It will go through it. This was when the tool was brand new and I think sometimes they just need a little breaking in. But I have had testing sessions where it goes through just about everything I throw at it.
Great channel!
I appreciate that. Big fan of your channel!
If not for the XGT dust blower, I would not be on the XGT platform.
I’ve heard it’s great. For me it’s the drill though!
These are 36 volt tools. It is printed all over the drill and the battery.
This is correct. They refer to the max voltage when they say 40 volt. It’s just like DEWALT calling their tools 20v max instead of 18v like everyone else.
Should I go with Makita GDT01D or Makita XDT19T? Thank you!
While I haven’t yet done a head to head comparison of the the two (I only have the XDT16) the 40v impact driver didn’t feel substantially stronger than the 18v. Unless you are going to get the higher power draw tools like saws and such I think the XDT19 would be a great choice too. You can’t go wrong with either.
Ill stick with the Hercules!
#Makita® XGT 👍
Do I want too? Yes. Did I immediately shit myself seeing a drill, impact and 2 batteries for something like 450 CAD plus 15% tax? Also yes.
Definitely sticking with my brushless ryobi lmao
in norway just the impact with 2 batteries and charger is like 750 dollars
Can get a lxt tool only 100 bucks, is that a deal?
Depending on the tool model. For example, I bought the XDT19 impact driver for about 105 recently. The drill have never looked into tool only but I am sure it's out there on other sites for a decent price.
Brushless 1/2 hammer drill
That's cheaper than you will get through most places like Home Depot where I live. Ebay looks to be high 90s so it seems reasonably good.
Nothing can beat the Milwaukee. It is simple the best and most powerful
Nope