Haldex controller MQB 0CQ Gen5 Haldex Standalone Golf 7R TTRS RS3
ฝัง
- เผยแพร่เมื่อ 31 มี.ค. 2019
- Haldex controller MQB 0CQ Gen5 Haldex running Standalone
Haldex Performance Controller to have full control of the Haldex 4Motion system. Used in Dragrace, Track race, Street race and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution.
For project cars like Golf 1 2 3 Corrado rebuild to haldex 4motion.
And for original 4motion car like Golf 4 R32 Golf 5 R32 Golf 6 R Passat R36 Audi TT Golf 7R TTRS RS3
/ haldexcontroller
www.haldexcontroller.com - ยานยนต์และพาหนะ
good job Jeroen ;) always remember how you helped me with fine-tuning on my Golf mkV R32 online in couple of days befor my roadtrip holidays. That Golf is now gone (was stolen), bud the two years and togother nearly 20k.km in Alps were fantastic also because of the strongly enhanced power split to the rear (thanks your haldex controler) I called the controler "power understeer deleter" :) It was so much surprasing how can be a haldex vehicle pushed from behind and the front wheels had significantly more grip to steer.
Thank you Marián! and sorry to hear your car has been stolen :(
Marked your controller so if it pops up somewhere i will let you know!
Jeroen vd Veer Thats perfect Jeroen, thank you
I have this unit on our rs3, I can not go more than 60/40. changed my haldex pump with a new one. Thinking its the factor control unit, no way of knowing unless i get another. Shame this unit works through the factory unit unlike Syvec does. Will keep testing.
Hello Jeroen, good video. I wish you can show us all the other modes.
May I ask 2 questions:
1. Is this Bluetooth connectivity?
2. Does the setting go back to default (PassThru mode) if the connectivity is lost?
Hi,
there will be a few more in the up comming time.
Yes it connects with Bluetooth, but connection is not needed for the controller to run it runs on its own. phone is only needed to view and change settings.
So when connection is lost it will continue what it was doing.
You can select how the controller starts, last used mode or and preset mode like the passthru.
very interesting, Im just looking around to help me reduce power understeer in my 2017 Audi rs3, and this might be it! are there plans for apple support?
Hi
Apple is already supported on the latest model.
facebook.com/haldexcontroller/
Www.haldexcontroller.com
Hi Jeroen, how does the "map" setting of the device work?
Hi jeroen,I’ve an mk3 audi TT. I’ve few doubts. Will this device be compatible with the TT ? And Will the Haldex system wear out soon in case of prolonged unsage of the tune ?Is the max hp to the rear capped or it’ll increase if I go for an ECU tune ?
Hi, Yes it is compatible with your car.
vdveer-engineering.nl/index.php/en/shop/controllers/haldex-controller-gen5-0ay-inline-plug-and-play-detail
Depending how you set the maps and use your car you could get more or less wear on the haldex.
there is no software hp limit on the haldex
Hi Jeroen.
Do you have a manual of how is this installed? You have the mobile phone, the black part that is connected and the other plate part that is not connected anywhere. What is this thing for?
Thanks for your answer.
Regards
Installation is plug and play under the rear seat.
That module is the OEM module same as the one that is on the right side of the Haldex
vdveer-engineering.nl/index.php/en/products/haldex-controller/haldex-controller-overview
Anybody compared this to the Iroz one,
Like the Bluetooth feature and believe the Syvecs one has a small hardware change that goes inside the haldex but still very similar in there set up
I think this utilizes the factory controller which might be an issue, Syvecs bypass it so it not using the factory can voltages etc..
@@MODIT it also come with a different valve spring inside the pump to facilitate better flow with the haldex fluid which theoretically should improve reaction times of the haldex...but you have to install a headline to a controller...wish they could figure out the Bluetooth
@@hunterlane3323 Correct, this can easily be added though.
Hi, is it possible to know the differences between stanaline, plug and play.....and the other versions on sale? Thank you and good day
The difference is the wiring loom, plug and play for original 4motion cars and standalone for swapped cars.
It is compatible with seat leon cupra 300 4drive Dez 2018 and shiping to Germany.
Yes its compatible with your Seat Leon.
Can ship worldwide.
Amazing controller, just bought mine for my mk6 R, seems that the pump takes quite a beating for fixed option, do you know if it's ok to set it up at 50/50 for long periods of time at track?
Gen5 works with different pump type and is not as stong as the older models. Gen4 normally runs most of the time but setting it 50/50 fulltime will give more wear to the clutch pack than normal.
@@jeroenr36 makes sense, i'll try 70/30 to test at track and see how it goes.
great stuff to know gen4 haldex is stronger than gen5.
keep up the good work :)
Hi Quim, how long is the warranty period for the controller? The controller must have a Bluetooth connection built-in, is that correct?
@@khvidtube1617 I don't remember how long the warranty is up, you may ask Jeroen who is the developer, great guy and gives good post-sale support.
The controller has a bluetooth connection built in as you say, you only need to fire up the car and open the app and it will find the controller ;)
@@vitaltrina
Thank you for your reply. I will ask him. For your experience, what is the default torque distribution when you put your car mode into Dynamic & transmission in sport mode? I guess you can see the distribution reading in Passthru mode.
If do and awd conversion to my mk7 gti can use this to make the awd work with the ecu
Yes that's possible.
Hi do you think it would be possible to convert the Haldex Jen 2 stand alone to work on a kuga awd as I have converted my focus rs mk2 and put the kuga running gear on it thanks mark
Yes you can run any VAG Haldex standalone in your Focus with the Haldex Controller
Hi Jeroen, I got 2008 Audi s3 8p... is it competible with my car ? and how can I get it :)
Hi,
Yes it is compatible with your car! You can order on my website or contact on FB
vdveer-engineering.nl/index.php/en/shop/haldex-controller
facebook.com/haldexcontroller/
Will this work on my 2019 TTRS? I’m Looking for better traction off the line.
Yes its compatible with your 19 TTRS
vdveer-engineering.nl/index.php/en/shop/controllers/haldex-controller-gen5-0cq-mqb-inline-plug-and-play-detail
Interesting product, if you don't mind I have several questions:
1. Can you log data with this system?
2. Do you have map data that shows how the stock systems operate so we have some frame of reference for making adjustments building our own map?
3. Any demonstration of how this helps performance?
4. Any recommended settings and how they vary from stock?
5. I would imagine we would want different settings for different racing (road course, autocross, drag), and for street use. Doe the app let you save and change map settings? Is that what the optional switch is intended for?
Any videos showing the difference launching, cornering under various conditions would be great. Seems like the perfect device for folks that like to experiment, I would imagine someone has data and maybe some video showing what is possible with this device no?
Yes it can log some data from engine abs and haldex.
Do not have map data but the app show how the haldex responses in stock mode.
Save and load is on the todo list, have it partially working but its not finished yet.
The switch is for switching between the different modes, 12 positions that can be programmed.
I do not have any cars or getting any cars here to make video's still waiting on some from customers and testers.
@@jeroenr36 Thanks for the reply, some performance data would be huge for your sales. I think most folks will not spend that kind of money without some sort of clear evidence of performance gains.
I would love to test and play with one of these, but with no performance data the price is a bit steep, at $500-$600 I think would sell a lot more of them.
Is there any way to install a oil cooler for the rear diff/haldex to combat any over heating issues of their is any ?
There is no external connection available for the oil. maybe you can connect lines to the drain and fill holes and pump the oil thru there.
@@jeroenr36 ok thanks for that piece of information just trying to figure out if their was or would be any issues of overheating from the use of the haldex thanks.
@@omarreyes8722 I think the only way to overheat it is that the clutch is slipping a lot and creating friction heat.
Still it would not damage the haldex as it has a temperature protection at 100gr it will turn off above.
@@jeroenr36 ok awesome thanks for the feed back on the haldex and how your product works definitely will be buying one for my r32 in the states 🙌🏼🙌🏼🙌🏼
nice but too expensive...