Very informative video Tim. Sounds like Deere is making some good well over due improvements. I also see your pond is looking great. Thanks for the Deere update.
thanks for keeping us updated, tim! the air ride seat could be interesting. will have to check the part numbers when they are available and see if I could maybe retrofit that to a 2022 like we were able to with the updated fender with the switch cutouts.
Tim, my 1025r is a 2020 model. Perfectly happy with it. However, some things I wish I had. On the 3 pt hitch, a way to tilt the box blade hydraulically. Ive seen your video with the aftermarket kit and it looked like it could use a lot of improvement. Not smooth at all. It's to bad no one manufactureers a reverse gearbox for the post hole digger. That would be huge.
Because adding A/C is a big engineering feat, you're adding and trying to fit the following in a tiny package: Compressor pump on the engine Evaporator core in front of the radiator & hydro cooler Condenser core in the cab Dryer under the hood Valves under the hood And then routing all of the lines and wires for it through the engine bay, floorboard, and cab. Not to mention when you engage it you now have even less power going to your PTOs, with only a 25hp engine with 22hp out the PTO you lose 10%-15% of that engaging the A/C so if you want A/C while brush cutting you'll be disappointed with the mere 20hp of a NEW tractor powering the mower that goes down even more over time.
Thanks Tim pointing out the new upgrades on the 1025R hours for 2025 year models my 2013 1025 R works good the upgrades do not pull me in to upgrade to a newer tractor.when stop in at the dealer to pick up odds and ends I check out the Newer tractors like mine and they didn't upgrade them over the years when I asked the salesman he said he didn't know why but they had a good thing that's probably why they never changed much thanks again for your heads up keep up the good work
Thanks for the great video Tim! I’m interested in the air ride seat because I mow 4 acres and my BX beat me up so much with the rough ride that I purchased a zero turn also. I would like to go back to a tractor if it rode well enough to complete my mowing. One machine is easier to store and maintain as well the mowing experience is better on a tractor.
You can get a REALLY NICE suspension seat from TracSeats.com use code TTWT for 5% off. It is a "top of the line" seat. As good, or better than an air seat. I REALLY like it.
I have a 2019 2025R TLB and just paid it off. The changes they came out with are not that drastic for me to run out and trade mine in. They will be nice for a new consumer shopping for a new tractor. Now if you had said they made a factory cab with AC/heat and compatible with the backhoe. Then I would consider it. Also, a turbo on the 2025R would have been nice also. Help differentiate the 25hp engine from the others.
Great job, young man - really informative! The 64k$ question: will the air ride seat mechanism be compatible for swapping onto my '22? I will buy the parts if it fits. Thank you, sir.
On the LED displays, I am the new owner of a used 2005 Sea Ray Sundancer boat with LED gauges on the dash. These gauges were discontinued long ago, and the communication technology to the motor and other items such as the fuel level gauge or trim equipment has changed. I found a service with a stellar reputation that will rebuild my existing gauges. My guess is a volume of demand will create a LED dash repair solution.
Tim, I just bought new 2024 model. Dealer installed the 60 inch mower deck. When I engaged PTO, the driveshaft was not installed correctly and came loose beating under tractor immediately and broke off transmission oil filter as well as cast aluminum nipple. Dealer has repaired but should I be worried about future problems! Had 3 minutes on tractor
Encourage dealer to test it good. Have them show you (again…a few times) how to connect/disconnect the deck. There should be nothing to worry about. It works beautifully. I suspect something got installed improperly the first time.
The pond looks great. Have you had to add much water? It looks pretty full. Down in southern Indiana we are seeing a lot of ponds that are getting low.
Just bought a 2024 2025R model. I don't see a reason to worry about my purchase being overly hasty with these new features being introduced next year... I have enjoyed a few of the perks that came with the newer machine in general over my previous 2014 tractor, so it will be interesting to see how they continue to change things in the future! Are you guys thinking about showcasing a 2025R on the channel soon? I think it kinda gets overlooked in the Deere lineup do to being compared as a pointless upgrade to a 1025R. My opinion, but It seems to be "more" then a slight upgrade to the 1025R while being as good at handling the same tight spaces. But what do I know? Anyhow I certainly have found there to be more Pros then cons to my recent upgrade. The cost I guess would be the biggest con over the 1025R, and that certainly is a big one.
The beefier frame and larger size make it a better candidate for the hydros plus upgrades over a 1025R, says me. You can have the power and lift of the larger 2 series, in a more maneuverable package, for a bit less cost.
Just last week got my first JD, a 2021MY 2025R. Been dying to have a 2032R/2038R because they're just fabulous with way more features than the smaller guys but priced REALLY high in comparison. Fun fact; team Orange has 2 really affordable compacts and team Green has their smaller 3 series & 1 series priced to better compete with them which further solidifies select size JDs as better/worse deals than the rest of their line..... Anywho the 1025R on paper achieves everything I need on a mechanical+performance level but I needed slightly better ground clearance and being 6'2" I bang my knees and elbows on EVERYTHING in the ops station of the 1 series. Found a used 2025R for just $2k more than a used 1025R outfitted the same way, took it and ran! I definitely made the right choice, fits all my needs and with it sharing so much with the 1025R I have a LOT of affordable accessory options both from JD or aftermaket should I feel the need to upgrade over time - like the hydraulics are slightly better than the 1025R but I think the Hydroplus stage 2/3 pump is still going to be a near purchase, and soon add 3rd function for grapple, etc. All those improvements on the 203_Rs are big bucks on an already expensive unit 😳
I like hearing about the air ride seat. Will there be enough head clearence if you have the cab. also will they ofer air conditioning in th cab modles in the 1025R or the 2025R
Great video. I can't wait to see what's next. I would like to see you do an installation video putting either a light bar or small LEDs on the rops bar to a nice switch. The backhoe could use it. 🤔😁
Great info Tim. Sounds like some nice improvements. Looking forward to seeing how Hydros plus tackles some of those changes. Bummer that they didn't move the fuel gauge into that new cluster. Is there another 2025 model year update coming for the rest of the Deere compact tractors. As usual I am most excited to learn all I can about any changes that may be coming to the 25' mode 3R/4R machines. I do have that 25' model cab 3046R on order for my new build project, my dealer had no info on any changes when I ordered it.
One of the reasons I bought a bx23s was because it doesn't have "codes". I know this is going to eventually change with Kubota too as I saw a next gem common rail engine. But the longer it takes to get here the better.
Hi Tim just though6t if anyone might know would be you. as I watched your video on the new john Deere 1025r and mini others vary informative.so maybe you might know if or are their any changes on the 3046r open station coming for model year 2025. still waiting and hopping for changes with fuel fill location, arm rest , & more ergonomically design joy stick I know can't it all but seems like the only model they haven't made changes to. would appreciate it much. Thank You in advance cliff.
@@TractorTimewithTim thank you sir I'm sad been waiting 3 years I'm 69 years old retired need one for 10 acres. the 2 series a little small 4 series to big. wanted to start a little side hustle love the seat time i have 2 hobbies playing my piano and working outside. in 1996 bought a new john Deere 955 was a good stable tractor so was hoping for a ergonomic change in the 3046r well can't have everything Maybe wait a another year thank you again hope to meet you sometime have a blessed day.
Very neat stuff, I work at a JD dealer and am very interested to see some of these updates in the coming months! Say Tim, how is that Turbo kit holding up? How many hours are on it and what's your experience been like all these years with it? I'm looking to get a Hydroplus pump upgrade on my 2025R and might order up the turbo kit at the same time but wanted some long-term user reviews of it first. Thanks!
Do it! I have had no issues. Make sure you turn up the fuel to match. It is a nice addition. I’m getting close to 100 hours on it. Haven’t ran this tractor as much as I should.
was watching another tractor channel local(45 min) from me while i was cooking home made cheese burgers and French fries. as i was serving it this video came on. you tube must be watching i figure and know your love for a good burger
Bluetooth? Sensors? Why does it feel like John Deere is inching us toward a subcompact that can't be fixed w/o their technicians, just like the large Ag equipment?
@@TractorTimewithTim Thanks Tim. I added the turbo kit to my 1025R but i painted the exhaust with Cerakote. It turned out REALLY nice and it doesnt rust.
@@TractorTimewithTim I just got a brand new 2024MY 2025R and have watched older greasing videos where it looks like it was a hole to try to get at the front zerk. On my new 2025R that opening is part of the larger opening in that area so there’s much better access than the older design with just the hole.
Hi Tim, I've been watching all you informative videos on the 1025r. I am seriously considering one, but want to get one with both the loader and backhoe already installed. From what I gather, adding the backhoe later if not originally equipped requires power beyond installed, so my thought was why not search the used market (and some year old new) for one that has both. Would you consider doing a similar used tractor search with historic pricing, but for those with backhoe? I would appreciate what other features should be considered as well. Thanks in advance.
If you are patient, buying used 1025R with backhoe is definitely the least expensive way to buy it. backhoes depreciate faster than tractor or loader. You can typically add 3-4000 to the used prices for backhoe equipped tractors.
What hydraulic multiplier will work from power beyond? Also have you used fasse multiplier they have one that adds a joystick with several push buttons to select which outlet to control. It is a momentary switch. These also have POPPIT VALVES .they don't leak down. Own one and so much better than the summit I have Thanks.
Yep, the Fasse do not leak down. ...but they are double the price. Summit has the joystick option, and they use Poppit couplers as well. Oh, and to answer your question, the Summit rear (or front and rear) kits plug directly into the Power Beyond.
Tim, loyal viewer here. Always try to like every video. I have not seen the Kubota in some time. Not even when you were tilling last week. Do you still have it. I only own JD, had one K and didn't like it. Light weight and treadle pedal.
The Grand L is the way to go to get rid of the standard treadle peddle. Frankly, I'm surprised that Kubota didn't put the Grand L peddle on the LX series since it is also a deluxe tractor in the Kubota line up.
@@TractorTimewithTim That sounds good. I have a 2019 1025 with the factory third function. I have been told by others (summit Hydraulics) that a power beyond cannot be added. I would like to add it so that I can add more rear outlets with a summit or other kit.
Tim, thank you for this video. This video couldn’t have come at a better time as I am planning on getting a 2025r in the new year and have been trying to figure out exactly what all has changed between MY24 & MY25. As an engineer, I need to know as many details as possible in order to make a decision and this video definitely has helped solidify that I am getting a MY25 tractor. I only wish the air ride seat was compatible with the backhoe 😢
@@TractorTimewithTim nope, if you try to add the deluxe open operator station and the backhoe on Deere’s website, it shows that there is a conflict between the two.
I just purchased a 2024 MY 1025r. I've purchased the turbo+ and performance+ kits (haven't had time to install yet). I'm wanting to get the JD 3rd func. This kit is a bit of a mess. I don't need the 3rd right away, so I am wanting to see the 2025 MY 3rd kit (stackable valve). I have the hoe/PB, so sorting out all of this before I pull the trigger is desirable. I have the 4port single point. I have the 6 point kit ordered. I'm trying to minimize the amount of wasted hardlines and hoses (not an easy task). I'll make whatever lines/hoses I need, but I need to see the parts diagrams to start to design what I need. So far, I don't see anything for the 2025s.
Why JD not put power beyond or a 3rd function on every tractor? Why not boost the factory hydro pressure for improved 3pt and loader lift? The most expensive tractor brand should come with capability the others don't.
Biggest complaint I heard was the dash screen and not having the fuel gauge there. I'm scared to see the pricing for the TLB configuration! They went up about 10k now! Tim looked close to the edge of the pond. I was waiting for the ending to see him fall in....lol
So, are tractors like vehicles in the sense that often times people say to avoid the first year, while bugs are worked out? (In general, not specifically talking about the 1025R)
When we were looking to buy a new tractor, we went to John Deere first. We had moved from central Illinois and after a few years in Florida we moved to more property. I was looking at the 3 series with the loader because in my thoughts is you can always take it off but if you don't have it, buying it could cause an issue. After asking a few questions the salesman walked away. Okay he doesn't care if we buy a tractor. On to Kubota, not sure what was going on there but we ended up walking away. So we would be out driving and we came across LS tractor and, Okay never ever heard of them. We stopped and talked to the dealer, his name is Matt Miller and we became good friends. He also ran a landscape business and also hauled rock. Bought an LS and it came with many options that others don't offer. I've had this tractor for 10 years and only ever had a small issue which we fixed. Only thing now is I wished I would have bought one a little bigger with more horsepower.
Pretty sure the air ride seat is not compatible with the backhoe. It's bigger than the standard seat, as a result there isn't room for the backhoe seat.
@@TractorTimewithTim I'm not sure the air ride seat folds forward. If it does fold forward, the frame or seat itself is so large that the backhoe seat will not fold down flat like it is supposed to. I haven't actually seen it in person, I have just seen the ordering system which will not allow you to equip a TLB with the air ride seat. On a related note, is there any progress on getting 6 port single point connector for tractors that have the factory hard lines to the single point location? It seems that Deere is really missing an opportunity here, with the 2025 relocated 3rd function value, to have 3rd function hard lines run to the same point as the existing 4 hard lines and use a 6 port SP connector.
Great information. I for one don't feel the need to run out and buy the new 2025 version of the 1025R for only a couple of changes. After market suppliers continue to offer all the options that I am interested in. And I'm sure the finance committee would never hear my case...😂
I can’t say I’ve ever even considered going out to buy a new model tractor simply due to updates, with the exception of the recent LX Kubotas that fixed the hydrostatic “whine.” I considered it, but only very briefly. Hard to justify trading in on a tractor, which typically lasts a lifetime.
Thanks for this video Tim. I'm looking to get a sub compact soon and I've went from being sold on a bx23s to now plan on going with a 1025r tlb thanks to all your videos. Love how easily implements change on the 1025r
You won’t be disappointed! I’ve got a few kubotas but found the comparisons that Tim did a few years ago and changed my mind as well. Went with a 1025R TLB over the kubota and love it!
I'll always say that if its not money or size constraints and you plan on doing a lot of work with the tractor..consider looking into the 20 (38r) series :) you would get loads more tractor. Tim even has a video about it
@nekoroms ive kicked the idea around going bigger but I dont want a second machine for mowing the lawn area of the property and had troubles with a kubota l3800 tearing up grass in the past. Would a bigger tractor get stuff done quickly and more efficient, absolutely but I think I'm ok taking things slower with a sub compact since I do have the luxury of being retired so I got time to mess around lol
@@zacrussell8873 its not always about time...if you do loads of medium loader work a bigger tractor wont tip over immediately there is a small rock under a tire... or the 3 point arms lift way more or higher off the ground. All tractors do tear up ground to a degree and you cant mow right next to a object with a mid mower
I would own a 1025 if my local dealers did not suck (agpro). I have a piece of John Deere equipment and they do a horrible job keeping it running. I miss my independent John Deere dealer.
Pond looks good. With all that is going on with the economy a buyers market has to be incoming. The people who were buying these tractors in mass are all broke. The used market is going to be flooded soon. I would like to see what the JD repo market looks like.
Funny that they’re updating the 1 series and 2025r, which came out in early 2010’s and has been updated some a few times…when the 3R has basically been the same since around 2006 😂
Volumes. Even small coat reductions on the subcompacts make for huge savings…which in turn creates even more sales, even higher volumes, which allows even more optimization.
@@TractorTimewithTimI get it, but, I mean…c’mon, John Deere…update at least the 3R operator station…same tractor for 20 years (oh wait…LED lights now 🤦♂️) yet still crazy price hikes 🤷♂️
Its always good to improve the machine for the better and also lots of competition to help get these improvements. Ive been down my own rabbit hole since i bought a new john deere Z760r this past April. The factory blades (UC14208) for that mower are not that great. But to the point, I've researched blades (TCU15881) for a z950m that are, in fact, hi-lift more robust blades and fit my z760r. Which are also a listed option for the 1025r mowers. Also upgraded the MCS bags to those from the z9 (AM135816) series as well.Went from 6.5 bushel to about 10 bushel. I know your channel is about the tractors, but I just felt compelled to tell you. Maybe this is useful info to someone. Anyway yall be blessed and have a great day.
John Deere really knows how to efff the American people !!! These options costs are totally ridiculous!!! I was gonna buy a John Deere and it was going to be my first tractor . After all of this crap going on with them now I won’t , and will have to look at another brand . This is so wrong what they are doing to us . Best of luck who owns a Deere .
No need usb waist of money higher quality accessories like remote hydraulic switches The hydraulic safety valve under seat bad when dealers says we selll ten of those a week .
I was thinking of getting a deere, now that they are moving some of their manufacturing to Mexico acting very unamerican has changed my mind... Bye Bye Deere......
There is absolutely no way i would buy a john deere anything these days. Its just sad. On top of going woke they are the least capable tractors on the market. JOHN DEERE YOU NEED TO DO SOMETHING. WE AMERICANS ARE DONE WITH YOUR NONSENSE!
@Will-tm5bj good for you. Go ahead and get another booster and don't forget your mask. You should be wearing that mask everywhere you go. You are correct all Americans are not the same. How do you identify? You do realize after you buy the deere you will have overpayed for the weakest most overated tractor on the market.
I have no idea why anyone would ever buy Johndeere anything. Less capable for vastly more money. That's before all the years of Johndeere activity screwing over customers. I refuse to own anything johndeere green made after the 70s. There are much better options available at a better price point out there.
Don't much care about the changes in the deer people shouldn't be buying them anymore considering they are on the woke movement buy a deer and you stand with the wolf movement which is wrong scripturally and I stand with my Lord and Savior Jesus Christ
Tim, you cohost today did a spectacular job. We need to see more of them.
Very informative video Tim. Sounds like Deere is making some good well over due improvements. I also see your pond is looking great. Thanks for the Deere update.
Thanks!
Did they finally make a digital fuel gauge for the dash?
No quite yet :-)
@@TractorTimewithTim They need to...
4:07 “The 2025 model does not come with the cat” LOL, I nearly fell off my chair laughing. 🤣
If your looking for a cat, then check your local caterpillar dealer.
Well if you're looking for a cat, then check your local caterpillar dealer
Actually one of local JD dealers has a cat that walks around the store. I think he has been there for years. LOL
thanks for keeping us updated, tim! the air ride seat could be interesting. will have to check the part numbers when they are available and see if I could maybe retrofit that to a 2022 like we were able to with the updated fender with the switch cutouts.
Tim, my 1025r is a 2020 model. Perfectly happy with it. However, some things I wish I had. On the 3 pt hitch, a way to tilt the box blade hydraulically. Ive seen your video with the aftermarket kit and it looked like it could use a lot of improvement. Not smooth at all. It's to bad no one manufactureers a reverse gearbox for the post hole digger. That would be huge.
Pond looks amaZing! Great video.,.
Informative update Tim. If I were in the market I would surely go for the air ride seat. I’m spoiled. Blessings.
TIM why is it that deere cannot seem to ad ac option to their 1or 2 series cabs ? Kioti has offered it on thier subcompacts for awhile.
Ventrac has the same issue. I wish they would work hard like Ferris did on their large Zero Turn and made it happen with the help of a third party.
Because adding A/C is a big engineering feat, you're adding and trying to fit the following in a tiny package:
Compressor pump on the engine
Evaporator core in front of the radiator & hydro cooler
Condenser core in the cab
Dryer under the hood
Valves under the hood
And then routing all of the lines and wires for it through the engine bay, floorboard, and cab.
Not to mention when you engage it you now have even less power going to your PTOs, with only a 25hp engine with 22hp out the PTO you lose 10%-15% of that engaging the A/C so if you want A/C while brush cutting you'll be disappointed with the mere 20hp of a NEW tractor powering the mower that goes down even more over time.
Apparently kioti is just smarter than deere when it comes to engineering
Thanks Tim pointing out the new upgrades on the 1025R hours for 2025 year models my 2013 1025 R works good the upgrades do not pull me in to upgrade to a newer tractor.when stop in at the dealer to pick up odds and ends I check out the Newer tractors like mine and they didn't upgrade them over the years when I asked the salesman he said he didn't know why but they had a good thing that's probably why they never changed much thanks again for your heads up keep up the good work
Yep. The 1025R is still the best subcompact tractor. No need for major changes.
Thanks for the great video Tim! I’m interested in the air ride seat because I mow 4 acres and my BX beat me up so much with the rough ride that I purchased a zero turn also. I would like to go back to a tractor if it rode well enough to complete my mowing. One machine is easier to store and maintain as well the mowing experience is better on a tractor.
You can get a REALLY NICE suspension seat from TracSeats.com use code TTWT for 5% off. It is a "top of the line" seat. As good, or better than an air seat. I REALLY like it.
@@TractorTimewithTim Thanks a lot! I may give it a try.
I have a 2019 2025R TLB and just paid it off. The changes they came out with are not that drastic for me to run out and trade mine in. They will be nice for a new consumer shopping for a new tractor.
Now if you had said they made a factory cab with AC/heat and compatible with the backhoe. Then I would consider it. Also, a turbo on the 2025R would have been nice also. Help differentiate the 25hp engine from the others.
You always do a great job on these reviews. Thanks👮🏻♂️👍Chip
Great job, young man - really informative! The 64k$ question: will the air ride seat mechanism be compatible for swapping onto my '22? I will buy the parts if it fits.
Thank you, sir.
On the LED displays, I am the new owner of a used 2005 Sea Ray Sundancer boat with LED gauges on the dash. These gauges were discontinued long ago, and the communication technology to the motor and other items such as the fuel level gauge or trim equipment has changed. I found a service with a stellar reputation that will rebuild my existing gauges.
My guess is a volume of demand will create a LED dash repair solution.
Tim, I just bought new 2024 model. Dealer installed the 60 inch mower deck. When I engaged PTO, the driveshaft was not installed correctly and came loose beating under tractor immediately and broke off transmission oil filter as well as cast aluminum nipple. Dealer has repaired but should I be worried about future problems! Had 3 minutes on tractor
Encourage dealer to test it good.
Have them show you (again…a few times) how to connect/disconnect the deck.
There should be nothing to worry about. It works beautifully. I suspect something got installed improperly the first time.
The pond looks great. Have you had to add much water? It looks pretty full. Down in southern Indiana we are seeing a lot of ponds that are getting low.
Maybe 1 inch per week.
Just bought a 2024 2025R model. I don't see a reason to worry about my purchase being overly hasty with these new features being introduced next year... I have enjoyed a few of the perks that came with the newer machine in general over my previous 2014 tractor, so it will be interesting to see how they continue to change things in the future!
Are you guys thinking about showcasing a 2025R on the channel soon? I think it kinda gets overlooked in the Deere lineup do to being compared as a pointless upgrade to a 1025R. My opinion, but It seems to be "more" then a slight upgrade to the 1025R while being as good at handling the same tight spaces. But what do I know? Anyhow I certainly have found there to be more Pros then cons to my recent upgrade. The cost I guess would be the biggest con over the 1025R, and that certainly is a big one.
The beefier frame and larger size make it a better candidate for the hydros plus upgrades over a 1025R, says me.
You can have the power and lift of the larger 2 series, in a more maneuverable package, for a bit less cost.
Just last week got my first JD, a 2021MY 2025R. Been dying to have a 2032R/2038R because they're just fabulous with way more features than the smaller guys but priced REALLY high in comparison. Fun fact; team Orange has 2 really affordable compacts and team Green has their smaller 3 series & 1 series priced to better compete with them which further solidifies select size JDs as better/worse deals than the rest of their line.....
Anywho the 1025R on paper achieves everything I need on a mechanical+performance level but I needed slightly better ground clearance and being 6'2" I bang my knees and elbows on EVERYTHING in the ops station of the 1 series. Found a used 2025R for just $2k more than a used 1025R outfitted the same way, took it and ran! I definitely made the right choice, fits all my needs and with it sharing so much with the 1025R I have a LOT of affordable accessory options both from JD or aftermaket should I feel the need to upgrade over time - like the hydraulics are slightly better than the 1025R but I think the Hydroplus stage 2/3 pump is still going to be a near purchase, and soon add 3rd function for grapple, etc. All those improvements on the 203_Rs are big bucks on an already expensive unit 😳
I like hearing about the air ride seat. Will there be enough head clearence if you have the cab. also will they ofer air conditioning in th cab modles in the 1025R or the 2025R
No a/c
Great video. I can't wait to see what's next. I would like to see you do an installation video putting either a light bar or small LEDs on the rops bar to a nice switch. The backhoe could use it. 🤔😁
There is a switched connector at the base of the rops. So you don’t even need to add a switch. Just use the right sized bullet connectors.
@@TractorTimewithTim I'll check that out. Thanks
When an updated 3R comes out I’ll be buying one. I want some good old air conditioning for mowing all my grass
Great video, very informative! The pond looks great!
I had an air ride seat on my 1025r and it was a 2021 or 22 I believe. Sold it a year ago but it was great! Thanks for sharing...
Great info Tim. Sounds like some nice improvements.
Looking forward to seeing how Hydros plus tackles some of those changes.
Bummer that they didn't move the fuel gauge into that new cluster.
Is there another 2025 model year update coming for the rest of the Deere compact tractors.
As usual I am most excited to learn all I can about any changes that may be coming to the 25' mode 3R/4R machines.
I do have that 25' model cab 3046R on order for my new build project, my dealer had no info on any changes when I ordered it.
One of the reasons I bought a bx23s was because it doesn't have "codes". I know this is going to eventually change with Kubota too as I saw a next gem common rail engine. But the longer it takes to get here the better.
Hi Tim just though6t if anyone might know would be you. as I watched your video on the new john Deere 1025r and mini others vary informative.so maybe you might know if or are their any changes on the 3046r open station coming for model year 2025. still waiting and hopping for changes with fuel fill location, arm rest , & more ergonomically design joy stick I know can't it all but seems like the only model they haven't made changes to. would appreciate it much. Thank You in advance cliff.
Only addition is ‘Bluetooth connectivity’.
@@TractorTimewithTim thank you sir I'm sad been waiting 3 years I'm 69 years old retired need one for 10 acres. the 2 series a little small 4 series to big. wanted to start a little side hustle love the seat time i have 2 hobbies playing my piano and working outside. in 1996 bought a new john Deere 955 was a good stable tractor so was hoping for a ergonomic change in the 3046r well can't have everything Maybe wait a another year thank you again hope to meet you sometime have a blessed day.
Very neat stuff, I work at a JD dealer and am very interested to see some of these updates in the coming months!
Say Tim, how is that Turbo kit holding up? How many hours are on it and what's your experience been like all these years with it?
I'm looking to get a Hydroplus pump upgrade on my 2025R and might order up the turbo kit at the same time but wanted some long-term user reviews of it first. Thanks!
Do it! I have had no issues.
Make sure you turn up the fuel to match.
It is a nice addition. I’m getting close to 100 hours on it. Haven’t ran this tractor as much as I should.
was watching another tractor channel local(45 min) from me while i was cooking home made cheese burgers and French fries. as i was serving it this video came on. you tube must be watching i figure and know your love for a good burger
Tim this was a great video. Appreciate you for the content
Bluetooth? Sensors? Why does it feel like John Deere is inching us toward a subcompact that can't be fixed w/o their technicians, just like the large Ag equipment?
Tim, Will the turbo kit and all of the hydraulic upgrades fit the 2025 model?
Turbo, yes. Hydraulic upgrades…TBD.
@@TractorTimewithTim Thanks Tim. I added the turbo kit to my 1025R but i painted the exhaust with Cerakote. It turned out REALLY nice and it doesnt rust.
One question if you please Tim. Did they enlarge the access hole to grease the zerk that "cannot be greased" under the tractor?
No idea, but I suspect that entire situation is changed.
@@TractorTimewithTim I just got a brand new 2024MY 2025R and have watched older greasing videos where it looks like it was a hole to try to get at the front zerk. On my new 2025R that opening is part of the larger opening in that area so there’s much better access than the older design with just the hole.
Hi Tim, I've been watching all you informative videos on the 1025r. I am seriously considering one, but want to get one with both the loader and backhoe already installed. From what I gather, adding the backhoe later if not originally equipped requires power beyond installed, so my thought was why not search the used market (and some year old new) for one that has both. Would you consider doing a similar used tractor search with historic pricing, but for those with backhoe? I would appreciate what other features should be considered as well. Thanks in advance.
If you are patient, buying used 1025R with backhoe is definitely the least expensive way to buy it. backhoes depreciate faster than tractor or loader.
You can typically add 3-4000 to the used prices for backhoe equipped tractors.
@@TractorTimewithTim Thanks! Blessings
Have you seen any update timeline for the 2025r? Thanks in advance
Apparently arriving at dealers in Jan 25
@@TractorTimewithTim Same changes to 2025r that you spoke about for the 1025r one would assume?
@@jd1029yes.
Wonder if we can get some jb weld and get that new pump set up on an older 1025r
What hydraulic multiplier will work from power beyond?
Also have you used fasse multiplier they have one that adds a joystick with several push buttons to select which outlet to control. It is a momentary switch.
These also have POPPIT VALVES .they don't leak down.
Own one and so much better than the summit I have Thanks.
Yep, the Fasse do not leak down. ...but they are double the price. Summit has the joystick option, and they use Poppit couplers as well.
Oh, and to answer your question, the Summit rear (or front and rear) kits plug directly into the Power Beyond.
Henry Ford used the same dash display for years on a model T ... (None!) Tim the pond looks nice , catch any fish yet?
Thanks Tim. Wish you lived next door. Consider giving us a list of your recommended options on a new 1025r.
What about back up lights and an electric in dash fuel gauge
Very nice I wonder if anything will change on the 3r or 4r
When is a realistic time line to see the new model year at dealers?
Tim, loyal viewer here. Always try to like every video. I have not seen the Kubota in some time. Not even when you were tilling last week. Do you still have it. I only own JD, had one K and didn't like it. Light weight and treadle pedal.
Still got it...just don't use it. No one wants to drive it.
The Grand L is the way to go to get rid of the standard treadle peddle. Frankly, I'm surprised that Kubota didn't put the Grand L peddle on the LX series since it is also a deluxe tractor in the Kubota line up.
@@TractorTimewithTim I wonder if the LX4020 would be any better.
Will you be able to have the power beyond and a factory third function at the same time?
Yes. You can now as well. (not rear hydraulics, but front 3rd).
@@TractorTimewithTim That sounds good. I have a 2019 1025 with the factory third function. I have been told by others (summit Hydraulics) that a power beyond cannot be added. I would like to add it so that I can add more rear outlets with a summit or other kit.
@@PaulGoplenis your third function in front? If so, PB can be added.
Tim, thank you for this video. This video couldn’t have come at a better time as I am planning on getting a 2025r in the new year and have been trying to figure out exactly what all has changed between MY24 & MY25. As an engineer, I need to know as many details as possible in order to make a decision and this video definitely has helped solidify that I am getting a MY25 tractor. I only wish the air ride seat was compatible with the backhoe 😢
It isn’t??
@@TractorTimewithTim nope, if you try to add the deluxe open operator station and the backhoe on Deere’s website, it shows that there is a conflict between the two.
thanks for the info. Pond looks great.
I just purchased a 2024 MY 1025r. I've purchased the turbo+ and performance+ kits (haven't had time to install yet). I'm wanting to get the JD 3rd func. This kit is a bit of a mess. I don't need the 3rd right away, so I am wanting to see the 2025 MY 3rd kit (stackable valve). I have the hoe/PB, so sorting out all of this before I pull the trigger is desirable. I have the 4port single point. I have the 6 point kit ordered. I'm trying to minimize the amount of wasted hardlines and hoses (not an easy task). I'll make whatever lines/hoses I need, but I need to see the parts diagrams to start to design what I need. So far, I don't see anything for the 2025s.
I would recommend simply going with summit-hydraulics.com/ttwt power beyond connected front and rear hydraulic kit. Use code ttwt for 5% discount.
Nice overview, thank you
LOL at how your Cat always has to get into the shot! 🙂
Why JD not put power beyond or a 3rd function on every tractor? Why not boost the factory hydro pressure for improved 3pt and loader lift? The most expensive tractor brand should come with capability the others don't.
I tend to agree. PB on every tractor couldn’t cost much.
Between being the weakest tractors on the market plus going woke john deere doesn't even get considered when many of us are looking to buy a tractor.
I think the 3rd function add on will be the biggest plus. Way easier to add and Maybe more standard on the tractors when people purchase one
Tim, anything on the large 2R or 3R yet?
Only built in Bluetooth.
Are they changing the body style?
Biggest complaint I heard was the dash screen and not having the fuel gauge there. I'm scared to see the pricing for the TLB configuration! They went up about 10k now! Tim looked close to the edge of the pond. I was waiting for the ending to see him fall in....lol
Thank you for the info
So, are tractors like vehicles in the sense that often times people say to avoid the first year, while bugs are worked out? (In general, not specifically talking about the 1025R)
I suppose a bit...but there really isn't much risk with these changes. Relatively small, and they are refinements on a long term existing design.
Will they have a 1RE styled hood???
Oh and will there be a 1RE-025 released?
I am guessing the 1RE will be introduced next year.
Model Year 25??
@@bethmotgomery2662do not know .
I guess there’s still no fuel shut off on the fuel tank and a better fuel filter and placement than the one under the floor ??
I dunno. ...won't know those kinds of details unless/until we get one.
Do you know anything about the 2032r recall
Uhoh! No. What is the issue?
@@TractorTimewithTim Not what the issue is, I talked to someone at JD Dealership and they said they didn't have parts.
great info
Is lift capacity really that bad?😊
GREAT Video... 😮😊
When we were looking to buy a new tractor, we went to John Deere first. We had moved from central Illinois and after a few years in Florida we moved to more property. I was looking at the 3 series with the loader because in my thoughts is you can always take it off but if you don't have it, buying it could cause an issue. After asking a few questions the salesman walked away. Okay he doesn't care if we buy a tractor. On to Kubota, not sure what was going on there but we ended up walking away. So we would be out driving and we came across LS tractor and, Okay never ever heard of them. We stopped and talked to the dealer, his name is Matt Miller and we became good friends. He also ran a landscape business and also hauled rock. Bought an LS and it came with many options that others don't offer. I've had this tractor for 10 years and only ever had a small issue which we fixed. Only thing now is I wished I would have bought one a little bigger with more horsepower.
Pretty sure the air ride seat is not compatible with the backhoe. It's bigger than the standard seat, as a result there isn't room for the backhoe seat.
Does it fold up? Have you seen it?
@@TractorTimewithTim I'm not sure the air ride seat folds forward. If it does fold forward, the frame or seat itself is so large that the backhoe seat will not fold down flat like it is supposed to. I haven't actually seen it in person, I have just seen the ordering system which will not allow you to equip a TLB with the air ride seat.
On a related note, is there any progress on getting 6 port single point connector for tractors that have the factory hard lines to the single point location? It seems that Deere is really missing an opportunity here, with the 2025 relocated 3rd function value, to have 3rd function hard lines run to the same point as the existing 4 hard lines and use a 6 port SP connector.
@@wadeturner2665please contact me via email Tim at tractortimewithtim dot com to discuss.
More pond updates please. How are your fish doing?
Fish disappeared this week. ...and it has been fairly warm, at least during the day. I guess they went to the bottom so to speak.
Great information. I for one don't feel the need to run out and buy the new 2025 version of the 1025R for only a couple of changes. After market suppliers continue to offer all the options that I am interested in. And I'm sure the finance committee would never hear my case...😂
I can’t say I’ve ever even considered going out to buy a new model tractor simply due to updates, with the exception of the recent LX Kubotas that fixed the hydrostatic “whine.” I considered it, but only very briefly. Hard to justify trading in on a tractor, which typically lasts a lifetime.
Sounds like they’re getting ready for 2027 emissions engines
Who did the trick or trick on your little tractor ??
th-cam.com/video/fxb3DTIMMa8/w-d-xo.html
Wish they would fix the brake issue. Anyone get that squared away yet?
How about a fuel Guage on the display screen 😒
Apparently not this year….but maybe later.
I don't know why they wouldn't provide a 6-port front function. Using grapples are a common application.
I have been offering one for a year now:
DiscountHydraulicHose.com/ttwt use code ttwt for 5% off.
How about a fuel gauge that actually works?!?!
Thanks for this video Tim. I'm looking to get a sub compact soon and I've went from being sold on a bx23s to now plan on going with a 1025r tlb thanks to all your videos. Love how easily implements change on the 1025r
You won’t be disappointed! I’ve got a few kubotas but found the comparisons that Tim did a few years ago and changed my mind as well. Went with a 1025R TLB over the kubota and love it!
I'll always say that if its not money or size constraints and you plan on doing a lot of work with the tractor..consider looking into the 20 (38r) series :) you would get loads more tractor. Tim even has a video about it
Love my 23s, it's been bulletproof for 5 years. No issues.
@nekoroms ive kicked the idea around going bigger but I dont want a second machine for mowing the lawn area of the property and had troubles with a kubota l3800 tearing up grass in the past. Would a bigger tractor get stuff done quickly and more efficient, absolutely but I think I'm ok taking things slower with a sub compact since I do have the luxury of being retired so I got time to mess around lol
@@zacrussell8873 its not always about time...if you do loads of medium loader work a bigger tractor wont tip over immediately there is a small rock under a tire... or the 3 point arms lift way more or higher off the ground. All tractors do tear up ground to a degree and you cant mow right next to a object with a mid mower
I would own a 1025 if my local dealers did not suck (agpro). I have a piece of John Deere equipment and they do a horrible job keeping it running. I miss my independent John Deere dealer.
Pond looks good. With all that is going on with the economy a buyers market has to be incoming. The people who were buying these tractors in mass are all broke. The used market is going to be flooded soon. I would like to see what the JD repo market looks like.
.... so .... your kit to make older decks work on the new frame ... is this going to be like the reversible operator kit? .. haha 92 conmmentor!
ha! Maybe! My understanding is that it takes 30 seconds with an angle grinder :-)
Funny that they’re updating the 1 series and 2025r, which came out in early 2010’s and has been updated some a few times…when the 3R has basically been the same since around 2006 😂
Volumes. Even small coat reductions on the subcompacts make for huge savings…which in turn creates even more sales, even higher volumes, which allows even more optimization.
@@TractorTimewithTimI get it, but, I mean…c’mon, John Deere…update at least the 3R operator station…same tractor for 20 years (oh wait…LED lights now 🤦♂️) yet still crazy price hikes 🤷♂️
@@tfunkhou88 yep. I agree!
Its always good to improve the machine for the better and also lots of competition to help get these improvements.
Ive been down my own rabbit hole since i bought a new john deere Z760r this past April. The factory blades (UC14208) for that mower are not that great. But to the point, I've researched blades (TCU15881) for a z950m that are, in fact, hi-lift more robust blades and fit my z760r. Which are also a listed option for the 1025r mowers.
Also upgraded the MCS bags to those from the z9 (AM135816) series as well.Went from 6.5 bushel to about 10 bushel.
I know your channel is about the tractors, but I just felt compelled to tell you. Maybe this is useful info to someone.
Anyway yall be blessed and have a great day.
Hopefully a new body design
Is the finance department going to let you get a new one 🤔.
Nothing runs like a house cat.
And since there is no lemon law for tractors it would be a nightmare if they have to many problems
Oh good grief.
Hydro-plus model from the factory 😅
👍🏻👍🏻
If the increase in HP isn't a big deal on the 2025 1025R then why use capital letters to announce it, and why refer to it as the biggest news?
Because it IS the biggest news.
John Deere really knows how to efff the American people !!! These options costs are totally ridiculous!!! I was gonna buy a John Deere and it was going to be my first tractor . After all of this crap going on with them now I won’t , and will have to look at another brand . This is so wrong what they are doing to us . Best of luck who owns a Deere .
No need usb waist of money higher quality accessories like remote hydraulic switches The hydraulic safety valve under seat bad when dealers says we selll ten of those a week .
I was thinking of getting a deere, now that they are moving some of their manufacturing to Mexico acting very unamerican has changed my mind... Bye Bye Deere......
🇨🇦👍
I wouldn’t want a 2025 because there the tests cases
Where did the Bible verses go
Still there (unless the upload somehow messed up!
Gotta keep watching…usually will see a funny clip at the end too.
There is absolutely no way i would buy a john deere anything these days. Its just sad. On top of going woke they are the least capable tractors on the market. JOHN DEERE YOU NEED TO DO SOMETHING. WE AMERICANS ARE DONE WITH YOUR NONSENSE!
Define woke
I'm an American and I like my john deere. Maybe I'll go buy a new one just because it pisses you off
@Will-tm5bj good for you. Go ahead and get another booster and don't forget your mask. You should be wearing that mask everywhere you go.
You are correct all Americans are not the same.
How do you identify?
You do realize after you buy the deere you will have overpayed for the weakest most overated tractor on the market.
Your talking about America and a Japan tractor
@ralphfarmer7621 john deere is looking to move production to Mexico. So Japanese vs Mexican.
I have no idea why anyone would ever buy Johndeere anything. Less capable for vastly more money. That's before all the years of Johndeere activity screwing over customers. I refuse to own anything johndeere green made after the 70s. There are much better options available at a better price point out there.
Don't much care about the changes in the deer people shouldn't be buying them anymore considering they are on the woke movement buy a deer and you stand with the wolf movement which is wrong scripturally and I stand with my Lord and Savior Jesus Christ
Yep not buying anything John Deere
I agree nothing earth shattering here that's a Generational change just a couple creature comforts. 🦾