How to Change YOUR Car's Coolant Fluid with a Full Coolant Flush

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ค. 2024
  • Today I’m showing how to change your car’s coolant fluid, no matter your car. I’m using a Citroen C1 engine coolant flush as the example. Also, why you need to change your cars coolant
    👉 How to clean and lubricate a car door lock: • How to Clean and Lubri...
    ☕ Support the channel here: www.buymeacoffee.com/CycloneCyd ☕
    💡 Subscribe and hit that bell 🔔 to learn more about looking after your car.
    Antifreeze/coolant
    UK 🇬🇧 2 litre: amzn.to/3NN0LZ1 5 litre: amzn.to/3OTI5Zg
    UK 🇬🇧 Deionised water: amzn.to/3bP097X
    USA 🇺🇸 1 gal ready to use best seller: amzn.to/3uqzJQz
    Cooling system flush
    UK 🇬🇧 amzn.to/3P6nlNx
    USA 🇺🇸 amzn.to/3RbBpY1
    Learn more about looking after your car:
    🎥 How to replace a CV [constant velocity] joint boot with a split kit: • Universal CV Boot Repa...
    🎥 Don’t let your fuel filter end up like this 100,000-mile old example:
    • Why Should I Change My...
    🎥 Battery & alternator care in this playlist: • Alternator and battery...
    Everyone should have a tyre pressure gauge in their glovebox:
    bit.ly/Tyre_press_guage
    bit.ly/Pressure_Gauge_2
    I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
    bit.ly/Tyre_stirrup_pump
    Are you trying to grow your own TH-cam channel? I use TubeBuddy, try it out for FREE:
    www.Tubebuddy.com/CycloneCyd
    Gear I use in filming and production:
    bit.ly/CC_Gear
    My videos are edited with Filmora X - try it for free
    bit.ly/Filmora_X_try4free
    Thank you
    00:00 How to change your car's coolant fluid
    01:47 Does coolant really need to be changed❓
    02:44 How often should you change coolant in your car❓
    03:22 What happens if you never change your coolant❓
    03:49 How to flush your engine coolant
    06:07 How to dispose of old coolant
    07:49 how to flush a car heater core
    08:29 Is coolant flush necessary?
    08:59 how to use a radiator flush
    11:30 monologue with top tips
    13:21 Proof you should flush your coolant
    14:16 Are there different types of coolant
    15:28 What happens if you mix coolant
    16:55 Refill with new coolant
    19:35 Job jobbed❗
    how to change your car’s coolant fluid, Citroen C1 engine coolant flush, coolant flush, how to change coolant in any car, why you need to change your car’s coolant, how often should you change the coolant in your vehicle, draining coolant from the engine, does coolant really need to be changed, ethylene glycol, anti corrosion package, corrosion protection package, how often should you change coolant in your car, coolant service interval, What happens if you never change your coolant, how to flush your engine coolant, is coolant flush necessary, refill with new coolant, what happens if you mix coolant, are there different types of coolant, how to use a radiator flush
  • ยานยนต์และพาหนะ

ความคิดเห็น • 76

  • @CycloneCyd
    @CycloneCyd  2 ปีที่แล้ว +5

    👉 How to clean and lubricate a car door lock: th-cam.com/video/9PKT1d1n3a0/w-d-xo.html

  • @panagiotisnikoloudakis4949
    @panagiotisnikoloudakis4949 8 หลายเดือนก่อน +4

    Taken the extra mile to explain engine cooling and coolant types. Well done!
    We want more videos 😊

  • @BeatTheD3viL
    @BeatTheD3viL 2 ปีที่แล้ว +3

    I now have a certification on passenger car coolant maintenance just by watching this video..... once.
    Thank you for the thorough details Good Sir!

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +2

      Thanks for watching!

  • @kenjithomas
    @kenjithomas ปีที่แล้ว +4

    You're a very good teacher. This is indeed a very well presented video on proper coolant replacement. However, please wear eye protection when handling chemicals. Cheers from Japan!

  • @johnskarvelis6936
    @johnskarvelis6936 ปีที่แล้ว +6

    Very clean and detailed presentation of all steps to be followed for proper flush and coolant replacement. Many Thanks!

    • @CycloneCyd
      @CycloneCyd  ปีที่แล้ว +4

      You'd never get such a thorough job from a garage, that's for sure.

  • @TonyG-iu4td
    @TonyG-iu4td ปีที่แล้ว +1

    Thank you for this video. It is ironic that most people probably don't realise how to do a flush correctly; Me included. You were completely thorough with your guidance. Hoping to follow this and sort my van tomorrow! 👍

  • @zahirahmed2498
    @zahirahmed2498 ปีที่แล้ว

    Glad I randomly came across your channel ...all ways good to learn the nitty gritty.

  • @liambaker7489
    @liambaker7489 ปีที่แล้ว +2

    I’m going to be trying this on the mrs car today. I’ve watched your videos before and found them very helpful. Looks like you’ve helped a lot of people. Cheers

    • @CycloneCyd
      @CycloneCyd  ปีที่แล้ว +2

      How did you get on?

  • @hmin5927
    @hmin5927 ปีที่แล้ว

    Excellent as it is very informative and detailed.

  • @BigDirtyBasterd
    @BigDirtyBasterd 2 หลายเดือนก่อน +2

    Dexcool is a OAT (Orange), you can mix OATs but not IAT (Green) coolents. When you mix OAT with IAT it turns brown and thickens up into a gel that the pump can not move. Back in the 90's GM had head gaskets blow because people mixed the IAT with the new OAT. Universal coolent (yellow) is just a OAT that can be used in all motors that use OAT, but not IAT.
    If you mixed up say, Toyota OAT (Blue) with GM OAT (Orange) nothing bad will happen, only a color change. It's like mixing gas from different stations. Gas is gas, it's only the additive package that changes. EVERY gas station gets it gas from the same spot in the area! The diffrence is when they pump it into the tanker, the driver pours in the additive package for that station, IE: Shell, Chevron, Mobil, Esso, etc...

  • @mikebolt9753
    @mikebolt9753 ปีที่แล้ว +1

    This is such a good informative video. Deserves way more views!

    • @CycloneCyd
      @CycloneCyd  ปีที่แล้ว +2

      Why, thank you sir. I would agree, but I'm too modest 🤣🤣🤣

  • @kris856
    @kris856 2 ปีที่แล้ว

    Thanks a lot for this detailed video. I am going to do the first coolant flush ever on my 12 year old honda this week and was looking for some videos on YT. Yours was the first one I found and straight it was the fantastic one. Subbed ofc :)

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว

      Many thanks. Glad you found it useful. Do let us know how you get on.

    • @LykeArgy
      @LykeArgy 5 หลายเดือนก่อน +1

      he did not let us know how he got on lol =) @@CycloneCyd

  • @josefk-g5u
    @josefk-g5u 9 หลายเดือนก่อน

    Thank you!

  • @555tg
    @555tg 2 หลายเดือนก่อน

    I Intend to do my Cooling System Shortly On My Mitsubishi Shogun . Engine Temp started Running On QTR So I Suspect the Thermostat needs Changing So good time to do this .Very well explained Video 👍..

  • @jimbo9310
    @jimbo9310 2 ปีที่แล้ว +1

    Excellent video cyd thanks 😊👍

    • @CycloneCyd
      @CycloneCyd  ปีที่แล้ว +1

      Glad you enjoyed it Jim!

  • @hughmnyks
    @hughmnyks 11 หลายเดือนก่อน

    Thank-you. Excellent video! Luckily I have a C1!

  • @carlwilkinson6861
    @carlwilkinson6861 ปีที่แล้ว

    Thank you

  • @volt8684
    @volt8684 ปีที่แล้ว +1

    Verythorough thankyou. There is no way a commercial garage would do all this. They would just drain. Refill and maybe flush. No way they would do heater matrix, which is always hardest part for me

  • @troy3456789
    @troy3456789 2 ปีที่แล้ว +1

    I wondered how to get passed that pesky coolant thermostat with cool water. Thank you, Cyd; you solved that handily. I now have no excuse not to flush the coolant in my 5 year old vehicle. You gave me plenty of incentive with all that rusty, scaly buildup that is inevitable if I don't.

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +2

      Awesome. Happy to be of help. There's no guarantee a flush and renew will stop you ever having a problem, but if you don't you can virtually guarantee you will. Stack the odds in your favour 👍

  • @MrWilliam.Stewart
    @MrWilliam.Stewart หลายเดือนก่อน

    Good information, two thumbs up.
    Your technique is better than mine.
    My technique is to drain from the radiator when cold, fill with distilled water, run the engine until thermostat opens and top off with more distilled water, replace cap, drive car. Repeat Around 5 to 6 times, over the week. When the drained fluid finally becomes clear, fill with fresh coolant of the correct type.
    Think I might watch some more of your videos now I stumbled upon this one, 👍
    Edit: only do my lazy technique when there is no chance of freezing temperatures.

  • @ThorGunnarIversen
    @ThorGunnarIversen 2 ปีที่แล้ว +3

    Very informational video! Good and understandable explanation as well. Now I’m going to change my coolant too. Thanks 😊

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +1

      Great to hear! Thanks

  • @KukLinSky
    @KukLinSky หลายเดือนก่อน

    Thanks

  • @SergioDattilorr
    @SergioDattilorr ปีที่แล้ว

    Sorry from italy numero uno top

  • @vauxaholic
    @vauxaholic 2 ปีที่แล้ว +1

    Great video as always 👍

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +3

      Glad you enjoyed it. I hope the info is useful. I tried to make it comprehensive, because there are no other videos out there that give the 'whole picture'. I don't think I've done a monologue before either, where I'm just talking to camera explaining a subject. How did you find that bit, boring? engaging? interesting?

    • @vauxaholic
      @vauxaholic 2 ปีที่แล้ว

      @@CycloneCyd I found the whole you talking to the camera part very interesting and engaging, you don’t talk a load of waffle you make your video’s straight to the point and give basic information of what and why your doing what your doing.
      Looking forward to following this information when I swap my coolant next month 👍

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +2

      @@vauxaholic awesome, thank you. I can talk the hind legs off a donkey, but that's the beauty of video as a medium - I can edit all the 'fluff' out of it, lol🤣

  • @MrOikono
    @MrOikono 2 ปีที่แล้ว +2

    Nice video as always mate thanks 🙏
    Will we get the vacuum line video for the 93?

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +3

      Yes, soon (ish)

    • @MrOikono
      @MrOikono 2 ปีที่แล้ว +1

      @@CycloneCyd thanks man

  • @martinneumann7783
    @martinneumann7783 2 ปีที่แล้ว +2

    Thanks for this video, Cyd. Have a nice summer!

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +1

      Thanks, you too!

  • @yuidfbse
    @yuidfbse 6 วันที่ผ่านมา

    Great video thanks a lot! One question, do you know where the coolant bleed valve/plug is on the Diesel CDI engine? I did a cooling flush on my 2009 ForTwo CDI but could not find the bleed point location that I know should be near the cylinder head to bleed the air out of the tubing. Now the car is overheating with the water not circulating and I guess full of air pockets everywhere. I've searched all over the Internet and the all the information available is only for the gasoline engine not the diesel. Thank you very much😊😊😊

  • @FlyingSpaghettiMonster2000
    @FlyingSpaghettiMonster2000 ปีที่แล้ว

    Which ramps do you use for the c1?

  • @alexe5461
    @alexe5461 7 หลายเดือนก่อน

    where did you get your car ramps cyd and how much did they cost? could you leave a link for them? cheers

  • @jdejong341
    @jdejong341 2 ปีที่แล้ว +1

    Hi Cylone cyd,
    Thanks for your clear explanation.
    The copper washer around the coolant drain plug is the same size as the oil ring?
    So it seems and that is also socket wrench size 14.
    How many Nm should the ring be tightened?
    And the pipes you took out of the block, for the heating matrix, are those the two narrower ones on the block at the group of four pipes on the C1, 107 and the Aygo?
    Thanks in advance

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +1

      Not certain of the exact spec, but at least 30Nm. I did mine F tight!
      The hoses are easily visible, follow them back from the heater to the block, but I think so, yes.

  • @garrynutter860
    @garrynutter860 2 ปีที่แล้ว +1

    Cyd great video, Thanks. Does unused coolant have a shelf life. Bye Heck coudnt get that drain undone, Next to the water pump. Thanks.

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +1

      As long as it remains sealed and stored in a 'cool' place and out of the sun, I think most makers quote a 5 year shelf life. I've used coolant well over 10 years old before with no apparent ill effects, but in this instance I would add a bottle of water wetter to the coolant mix to bolster the anti-corrosion package. amzn.to/3IIbAe6

  • @ryanlike2162
    @ryanlike2162 ปีที่แล้ว

    Did you take the H4 projector headlights out of this car? No good?

  • @rem9xird426
    @rem9xird426 9 หลายเดือนก่อน

    Hello, which pipe Do i have to Disconnect for the Radiator to clean it With Water? 😅 7:50

  • @jonathanbell7752
    @jonathanbell7752 ปีที่แล้ว

    Just had mine done it garage. Guy did everything. Just recommended checking levels tomorrow morning and just top with Dwater. Failed to ask expectation tank or radiator

    • @CycloneCyd
      @CycloneCyd  ปีที่แล้ว +2

      I'd be very surprised if any garage did as thorough a job as I show here. Virtually no-one would be prepared to pay the labour for such a job AND garages operate on throughput - doing jobs in less than "book time" while charging by the book❗ Methinks you're too trusting!

  • @matraz10
    @matraz10 ปีที่แล้ว

    Good video. Gave it a thumbs up. Although your belief of the three types of coolant is wrong. There's IAT (inorganic acid technology) the green old school stuff. OAT "Dex-Cool" (organic acid technology) all kinds of colors and the normal stuff now-a-days. Then there's HOAT (hybrid organic acid technology) in some newer vehicles, yellow or orange. Dex-Cool is an OAT coolant and the first OAT coolant. The only difference between Dex-Cool and all other OAT coolants is a copywrite name. The biggest issue with OAT coolants is getting air into the system, so all of your warnings about Dex-cool coolant applies to your engine, air and heat plus OAT coolant can cause fast corrosion of metals inside the engine and a thick mucky residue. So it's best to pull a vacuum on OAT coolant systems when filling them with a venturi device and an air compressor. Only way to be sure there's no air pockets in the system after refilling. Because all the troubles of Dexcool are troubles with all OAT coolants, mainly being air in the system. Gaskets and o-rings aren't really an issue any longer, as long as the right kind are used.
    This might've been mentioned elsewhere in the comments, I didn't read them all.

  • @philipbarham3499
    @philipbarham3499 ปีที่แล้ว

    Silly question but where can I get a replacement washer from for the drain plug. I looked online everywhere.
    Thanks in advance

    • @volt8684
      @volt8684 5 หลายเดือนก่อน

      Use a copper crush one off e bay or motor factor

  • @mikesaul8711
    @mikesaul8711 2 ปีที่แล้ว +1

    Hi,cyd,Any help with driver's door, citreon c1,metal (arm) makes clunky sound ,when you open and close door,have oiled it,but when you close door, you can here clunky sound, any Help, kind regards Mike. Norfolk 👍

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +1

      If you mean the check arm: lubricate the arm using silicone grease when the door is fully open and swing the door back and forth. Repeat a few times.
      Also check this th-cam.com/video/k-svdNfST2E/w-d-xo.html

    • @mikesaul8711
      @mikesaul8711 2 ปีที่แล้ว +1

      @@CycloneCyd many thanks cyd,always helpful 👍 Mike

  • @vBDKv
    @vBDKv 8 หลายเดือนก่อน

    Back in the day I just dropped a liter of filtered water in my car :) Probably a bad idea haha.

  • @arthunterns
    @arthunterns 2 ปีที่แล้ว +1

    Do I need coolant which Toyota approved? I have heard that it could cause water pump failure, if you use coolant which is not Toyota approved.

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว +7

      They would say that, they want to sell you "their"* coolant at inflated prices. Buy a reputable brand and flush thoroughly and you'll have no problems.
      * - OEMs don't make their own coolant, nor oils. They buy from the large refiners and package it as their own. And then put the scarers on you with stories of failures because you didn't use their brand.

    • @arthunterns
      @arthunterns ปีที่แล้ว +2

      @@CycloneCyd I put Motul coolant in the end. So far so good :)

  • @gumpfx
    @gumpfx 9 หลายเดือนก่อน +1

    Great video Cid, many thanks. Apologies if you've already covered this, but as the C1s do not come with a temperature gauge, do you think it's necessary to fit an aftermarket one? Many thanks Harry

    • @CycloneCyd
      @CycloneCyd  9 หลายเดือนก่อน +2

      The STOP light comes on if it gets too hot

    • @gumpfx
      @gumpfx 9 หลายเดือนก่อน +1

      @@CycloneCyd thanks Cyd, feel slightly embarrassed that I didn't know that!

    • @CycloneCyd
      @CycloneCyd  9 หลายเดือนก่อน +1

      @@gumpfx no one knows everything

    • @jsaunders8965
      @jsaunders8965 21 วันที่ผ่านมา

      Dex-Cool will mix just fine with regular OAT coolant imo, Dex-Cool is just the GM brand of OAT coolant, it even comes in the colour red these days I believe.

  • @paddrivers
    @paddrivers 2 ปีที่แล้ว +3

    Sadly most people haven't got a clue about preventive maintenance and have to go to Halfrauds to change a wiper blade so flushing a cooling system would be like brain surgery!

    • @volt8684
      @volt8684 2 ปีที่แล้ว

      Rubbish, many people use these type of vlogs to help themselves… me included and I maintain 4 vehicles, always slightly different. Ever grateful to guys like Cyd

    • @paddrivers
      @paddrivers 2 ปีที่แล้ว

      @@volt8684 Your a member of a relatively small church .
      Just look on ebay at the amount of cars sent to an early grave with neglected oil / fluid changes people just drive cars into the ground .
      Ive been in the motor trade most of my working life!

    • @CycloneCyd
      @CycloneCyd  2 ปีที่แล้ว

      lol

    • @paddrivers
      @paddrivers 2 ปีที่แล้ว

      @@CycloneCyd Very comprehensive and informative video as always Cyd👍.

    • @volt8684
      @volt8684 2 ปีที่แล้ว +3

      @@paddrivers they should teach it in schools. Basic maintenance is very doable but these vlogs give confidence. Still don’t agree with your opinion so we have to agree to disagree. Its motor trader costs that prob deter people servicing their cars. I am 64 I have never changed my brake fluid on any cars or motorcycles. Never had a problem. Lots of maintenance is overkill. Each to their own and I drive to Spain twice a year in my old banger.

  • @rodneythekingcobra
    @rodneythekingcobra 2 หลายเดือนก่อน

    We cant see what your doing.

  • @kevstamc3676
    @kevstamc3676 13 วันที่ผ่านมา

    Mate why are your reservoirs full to the brim! That's bad! Don't ever do that