Good evening. I know Im late very.. Late in the game. I have installed same exact SD tool v1.1, but Im not able to get it to pop in screen with format question?. I have ran it with 4 different SD card readers with no success. On some card readers, yellow LED blinks and others dont. I have reflowed solder several times and even tested continuity with multi meter and all points checks out. The only variable that is different from your video to mines is that this application was more than 6years ago while Im here in 2021 trying my luck. Could it that it does not run on windows 10 thus not detecting SD card?. Please advise, any suggestion is greatly appreciated.
Not sure what you mean, there is only one default driver for the card reader and that is installed automatically when you plug it in. Also make sure you don't format when it asks you to.
Are you running j-runner as administrator? Use a multimeter to check for any bridges etc. Also make sure your power brick it plugged into the xbox (Do not turn on xbox). Would also help if you can send me a clear picture of the soldering.
TH-cam Algorithm thinks that this video about corona virus =D
Good evening. I know Im late very.. Late in the game. I have installed same exact SD tool v1.1, but Im not able to get it to pop in screen with format question?. I have ran it with 4 different SD card readers with no success. On some card readers, yellow LED blinks and others dont. I have reflowed solder several times and even tested continuity with multi meter and all points checks out. The only variable that is different from your video to mines is that this application was more than 6years ago while Im here in 2021 trying my luck. Could it that it does not run on windows 10 thus not detecting SD card?. Please advise, any suggestion is greatly appreciated.
Did U get it fix?
Ezy tutorial, what is the JMP pins on the QSB do and like yer
***** It disables the crystal.
Yes i going to check with multimeter but the solder sees good you have to install diferent drives for the card reader
Not sure what you mean, there is only one default driver for the card reader and that is installed automatically when you plug it in. Also make sure you don't format when it asks you to.
Kiddoflows on June that what he talking about it ask on computer
Are you running j-runner as administrator? Use a multimeter to check for any bridges etc. Also make sure your power brick it plugged into the xbox (Do not turn on xbox). Would also help if you can send me a clear picture of the soldering.
Do you happen to use the maximus 360nandflasher?
Jared Jared Never used one sorry.
Anyone have the part number or description of the pin header used for this tool? It looks like a flush mount 2.54mm pitch but want to verify.
www.digikey.com/products/en?lang=en&site=us&keywords=S9013E-08-ND&x=11&y=9
Did you use flux? You lift pads?
Did you get it working?
I used this but my physical drive is in 0 mb I have corona v2 4gb what is wrong?
do i need rgh?
I will once I get a console in that needs the DGX to be used.
how can i check if the usb is damaged?
can you link jrunner download please
Where i can download SD Tool software? link not work
Never ask me to format de sd card
Send me a picture of your install.
Just upload the picture to a photo hosting site and send me the link.
No the motherboard is damage