Thanks a ton weekend modder! My dad and me managed to rgh my Xbox 360 using this guide! Can’t thank you enough! Would’ve bought parts from your store but I don’t think it ships where I live. Again thanks a ton!
iv recently being trying to do this to my Trinity board console but I think I messed up the cpu_post pad as the solder wont stick anymore to it, I have all the other points soldered just this one was the issue. I tried a system boot earlier and it did boot and was working but of course im stuck at this stage
Another super guide. I glitched a 4gb trinity using your guide. Boot takes 10 secs vs my 1.2 RGH Jasper on 15 secs. Maybe the Jasper could be fine tuned more. But very happy with the result, was fun trying a slim and using another chip. Thanks again !
im not sure what you're filming with but an exposure and focus lock would be really good to help with your videos. I know on the iPhone you just tap and hold on the point you want to focus on and it will lock on that. Thanks for the guide, just picked up a Trinity.
TheWeekendModder bro get a better camera and stuff! I don’t watch you’re videos all the way because of the video quality, if it were better I’d probably watch them start to finish just for fun
@@asdalskdf I can understand the concern, especially with this type of specific job, but it had good shots where it counted, everywhere else, and I think the pacing and level of detail was balanced and ample.
Huge and Many THANKS to WeekendModder. This tutorial turns my crap Matrix Glitcher V1 ALIVE! Once i though i had bought a damaged glitcher chip from Taubou from China,and now i found that i had mistaken on it. Though CR4 Muffin RGH2 method is not the latest and fatest one, this tutorial still demostrates its great value!
Such a great channel i've ordered from him multiple times as i am a console modder myself and ALL of his products are quality or take minor modification explained before adding to cart. Thanks for the great content #TWM
For some reason I can't get a cr.bin any reason why.Both my nand dumps are the same but no cpu key when I try to read back bin file or extract the files?
I thought I had done everything correctly, the blue light is on on the glitch chip. The xbox boots up correctly but when I plug in my usb the xex menu doesn't show up in the demos folder. I made sure the file is located in the hidden content folder. I'm Lost any suggestions?
You know, I've done a handful of phats, but I have never got the "0x00000000 console not found" until trying to do a Trinity. I was looking at the thing under a microscope, tried a different programmer, resoldered 3 times, it's perfectly done... nothing. Then plugged it into a different outlet... thanks man.
I think I lifted the post pad on the back of the board. Is there an alternate point for me to solder to or a way to jump/repair that spot to continue on?
I'm read the nand, and got ready to program the Matrix V1 and got "device not found", looked down at the chip and the blue led faintly comes on for a millisecond each time I wiggle the header pins. Any advice?
Take a very close look at the matrix chip for any cold solder joints or things that look like they are disconnected or bridged/connected where they shouldn't be.
at 19:00 in the image of the matrix v1 chip you're using for illustration I can see some components where the solder paste has not fully flowed during the smd reflow process. The MLCC capacitor above Vcc and to the left of the word SLIM looks bad. The one directly above RST towards the top of the image also looks half baked. If you see this kind of thing its a good idea to add a little flux and reflow with a soldering iron. Dry joints like this will lead to anoying intermittent problems. Or worse components falling off the PCB.
my matrix v1 chip will not stay blue after connecting it to the JR Programmer. it blinks once after i connect it. I tried soldering the wires onto the chip and it didn't make a difference
Can anyone tell me where to get the timing files from? I've tried to access all of the sites recommended and they appear to be down, maybe my ISP, not sure. Had to download a load of utilities including J Runner from a google drive but cannot see the timing files in amongst them. Any help would be appreciated.
Take a look at the video on this channel titled weekend modern j runner edition and there is a pinned comment with the latest dashboard version and it has all of the timing files in that download
Great video. The music is a little distracting, though... Just finished the video. One question about these items on the store: the matrix v1 has an option to have something preprogrammed. I've watched this video, but I'm not sure what to select here. The extra buck is worth a little less effort on my part, but this isn't really explained in this video.
also for a coolrunner rev c on trinity does anything need to be changed about the chip becuase on the website it syas remove capactitor but i havent seen hat anywhere else?
Hey im thinking of getting me a xbox360 trinity model and thinking of supporting you n your site by buying the matrix glitcher v1. if i get the trinity programmmed one do i still need a programmer? also any additional things i should be looking at or have?
Hello, Friend! Can you help me please. I have 2 XB360 (Trinity and Corona 4gb). And i buy JR Programmer v.2 and matrix glitchers v.3. Can i programming this chips with J-R Programmer v.2? If yes, can you explain me Dummies, how doing this))) Please!))) Good day!
@@CurrentGenGamesWithNick you are trying to use a different shipping address from your billing address. I require the billing address and shipping address to be the same.
@@TheWeekendModder I tried three different cards it keep saying on your end declined I don't know why I just use that Dunkin it's the same as the billing address order for the x flasher and nand wires
@@CurrentGenGamesWithNick all I can say is that every attempt was triggering my shipping/billing mismatch filter. Maybe use Amazon Pay? It's free and then doesn't have that restriction. You can still use whatever card you like
I'm not that clear on what you are asking or stating. If your issue is just that on the Xbox motherboard the headers to solder the programmer for reading/writing are through-holes that is totally normal. They are through-holes on all the motherboards just often filled with solder. Use some flux and apply solder and it will fill the holes and you can build up a little pad of solder just like I do in the video.
Yes, that answers my question entirely. Thank you!! I just had so many through-holes on the right side header that it didn't seem right. After clearly watching you yolo the solder into the through-hole and it globbed over nicely I figured I could do the same. I wanted to go with the ace V3, is there any major difference between Matrix and Ace v3? This is my first RGH so I'm likely following this guide to a T either way.. Thank you again. You replied quicker than se7ensins whole freaking community -_-.
The Ace chips have had some quality control issues with the release of the brown tinted pcb "cafe" versions, but if you can get good ones where the PCB is black (I have some on my store) then the Ace install on a Trinity is just slightly better as far as boot times go, but it's just a slight advantage. The matrix v1 muffin Trinity install is a markedly easier install though. functionally to the end result, there is no difference.
So definitely going with the matrix. Ordering from you because of the pre programming option which is a nice touch. The matrix is marginally more at other stores too.. I may just grab a nand x from you as well.. It's not a jrv2 but it'll do the trick.. Will this work for wire? I know you suggest one at the store but I want more colors as to not get confused myself lol www.amazon.com/gp/aw/d/B01KQ2JNLI/ref=psdcmw_495310_t2_B008AGUAII That and I may do more of these seeing as so many people are retiring them now days. Its almost a waste of a console using it stock... Lol. Thanks again, man.
The Nand-X is a better device than a JRPv2, so deffo go with that. The only advantage the JRPV2 has is the "rater" functionality which only works with CR4 chips and RJTAG chips which no one has or uses these days.
I’m new at this, I ordered a matrix v3, I read in the comment that you should disable the crystal oscillators for a Trinity console, how do I do this and are there any other changes have to make? Are the timing files the same?
On the matrix product pages on my website there are images that show the resistor to remove to disable the crystal. The timing file is the one suggested in the video appropriate for your motherboard.
Hi there. I'm just about to start a Trinity 2010 mod using your above video. I have a J runnner V1 programmer and just found a brand new Coolrunner Rev C in my parts box. Following the above tutorial and swapping the A,B,C points on the coolrunner is that all I need to change? Are the timing files the same on a Rev C as the Matrix V1 you are using? Many thanks and great work.
Thank you very much for all the info! I already rgh my Falcon xbox with the Matrix V1 with your help. One question please. Does the technique on this video work with a Trinity console with the 17559 dashboard. Thanks again!
Windows 10(64 Bit) doesn't recognize my JR Programmer. I disabled driver signature enforcement but it is not recognized. I installed the drivers that came with JRnner 0.5 but no luck. Any tips on how to get it to work? it worked before, though. Thanks in advance.
After installing windows 7 i got the JRP to work. I then learned that it was stuck in bootloader mode. Reflashibg its firmware solved that. Next, i tried to follow your tutorial on your page (the pictures) for a muffin install on my trinity console with a CR Rev c. But the referencek images and explanations for the muffin method especially with the coolrunner are confusing as far as the wiring and soldering points for the coolrunner are concerned. Is there any addition infos on this?
Never have I seen such a detailed tutorial. If you aren't a teacher, you should be. *raises hand* question: I'm getting a white 4GB Slim model and I hear they're most often Corona, besides doing NAND differently at the beginning, are there any other steps I must take to for a good outcome? (Assuming IT IS in fact a Corona & I'd be using all of the same chips)
Great tutorial the best I seen ever, I got a question, I have a Matrix V3 do you have a diagram?, because I soldered but it does not turn on, I only hear a beep when I try to turn it on but it does not turn on the lights, I looked for diagrams for this glitcher but none of them has worked so far, thanks for your help.
I got a trinity dashboard 13146 and I have installed matrix v3 using your tutorial, but it doesn't boot xell. I have tried all the muffin files and nothing happens. I wondering if my dashboard is the problem, should I update my dashboard to 17511?? What do you think?
@@TheWeekendModder hi there. I can't update my xbox, I have tried the dashboard 17511, 17526 and I got message "update failed status code 335A 4467 1600 0700 C000 000E" I restored the original nand.
You could search for the "weekend modder Jrunner edition" video and download the whole set, or if you go to my store and look at my matrix glitcher listing I have a link right on there to the muffin timing pack you can download them.
I have got an XBox 360 with Dash 13599 i want to RGH 1 it. But i can´t find an Diagram for the Matrix an RGH 1. Do you have one ? And what Timing file i should use ? Thanks :)
I wouldn't bother with RGH1. RGH 1.2 gives you the same boot times and you don't have the freezing fussyness of RGH1. So update to current dash and then do RGH 1.2
hey buddy, would you be able to direct me to a store that sells the viper dual nand chips and will ship to aus? i cant seem to find any via a google search, any help is appreciated thanks
TheWeekendModder they only have you listed as a reseller o their site haha, I’ve contacted them as well, just waiting for a reply! but would you know when you’d have them back in stock Thanks
Hey man i recieved my stuff today, I made a mistake in not noting down the dashversion before installing the nand x, install shows it worked in j runner, do i need to desolder all the points again to boot the xbox to take note of the dash version? thanks alot
Once you read the nand you can tell the dash version from the CB values in JRunner. also - you can just disconnect the nandx from the wires and boot normally - the wires being in won't stop it from booting.
TheWeekendModder I went ahead not long after and read the nand. All up and running on my first go. Trinity boots between 10-45 seconds. Over the moon. All thanks to your videos bud. Tomorrow I'm doing a Jasper and I ordered a cool runner from eBay to do a falcon. Thanks alot man
Probably. Modshop (the creator of the Viper) is doing a development cycle right now so if and when he has more to sell I'll deffo consider carrying them, but for now I'm out.
Ace V3 is technically "S-RGH" as released by 15432 and uses typical RGH2 style wiring. The "muffin" technique timings were also released by 15432 but they emulate the TX CR4 style wiring which uses the DB2G3 point and doesn't make use of E or F. Given the quality control issues that Ace V3's have had lately I'm leaning heavily toward the muffin installs using Matrix chips.
I have a matrix glitcher chip left without oscillator and a corona. I'd like to buy one but I don't know which I have to pick up. They look all the same for me!
TheWeekendModder yes, I know. I asked where can I buy Only the crystal because I have a spare chip without it and, I need it in order to install the chip on a Corona
Ah, k. It's a standard 48mhz crystal. Never tried buying them solo so not sure where to send you for it. Mouser, digikey I guess? Usually they're spec'd by size - so you'll have to measure the pads on the chip to figure out what physical size you need.
I hear that you say you've been getting faulty ace v3 chips from recent manufacturing, would you say it is safe to buy the 2015 model as advertised on ebay or will they throw in the recently made ones as well?
In my experience, anything that is the newer "cafe" color (kinda brown tint to the PCBs) is sketchy. But photos on eBay are showing black, but then sending cafe color. So frankly- I don't have a good recommendation about where to buy good ones. I managed to talk my supplier into specifically finding old stock for me, and I bought all 200 of them they had. They'll be up on my site for sale in another week or two when they come in.
No, the CPU key must be known in order to build a new nand image. If you don't know the CPU key of a console, you can generally write the appropriate ECC file to it, boot Xell and get your CPU Key that way.
Thank you for the answer. The problem is that the console does not want to boot. I already got it RGH. I know what happened to it. The green LED lights up and nothing else. So I wanted to enter the original NAND to check the error code, because with the entered XELL show.
There will be something on the power box attached to the cord that will say either 12V---10,83A or 12V---9,86A. The 10,83A is the trinity and the 9,86A is the corona.
That's a good indicator, but I've found LOTS of mislabeled consoles. 10.83 labeled that turn out to be Coronas and lots of 9.86 labeled that turn out to be Trinity.
Hi, Ive successfully done my first RGH1.2 on my old Jasper Yesterday by using a coolrunner and jr programmer however I also had a trinity console and matrix glitcher so i attempted to rgh it today using your guide and after following all your steps, my problem is when i go to power the console on to get into XELL for the first time with the glitcher i plug it in and i just see the blue led light up on the matrix before even powering on the console and when i did, the blue led just continued staying lit and didnt blink at all on the matrix so my xbox wont glitch could you help me with any tips that i could try to fix this problem ? Thanks!
10 -12 years ago I modded 17 trinity consoles watch ur videos. Today as i was going through my storage, I came across my modding t. Ive got a few Ace v3 chips left. Im gonna sit back and make a list of whatll I need. Is ur store still open????
oh for some reason i saw out of stock, but now it says add to cart, will buy one, also, should i get the JRP or have you pre-program the matrix glitcher since this is my first time ever sautering and modding the xbox?
TheWeekendModder oh and sorry to bug you again but if i get the nand-x chip will it be the same process for installing and writing the nand as you do with the JRP
Hi weekendmodder, is there a way to remove hacked firmware off a flashed DVD drive? Recently I un-jtagged my Jasper 256mb, it was originally on the blades and it is now, I already knew I wasn't able to use the DVD drive once I reflashed the original nand, but is there a way to remove the firmware? I un-jtagged it because I wanted it on the blades, yes I know I can't use any jtag programs or play newer games, but I have other consoles so I'm okay, I just want this jtaggable to be clean like it came out of the factory. Thank you. Oh and I get e69 when the DVD drive is plugged in.
The e69 tells me the DVD key in the drive probably doesn't match the motherboard. It is possible to re-write a drive's FW with retail. Do you know the DVD key for the console? Are you sure the drive matches?
TheWeekendModder actually yes, i bought this system brand new in the box from a seller on se7ensins and got it jtagged, I'm positive this is the matching drive
I have a trinity Xbox 360 i wanting to put a mod chip in and im wanting to know can you run it without the disk drive installed? Im wanting to put all my games on an external hdd and hard wire it to the 360's usb and install it where the disk drive normally is.
My XBOX Trinity 4G is halt after XELL booted few seconds but I still have time to get CPU key and then follow the last step to write NAND. After I re-plug everything together, my xbox booted and showed logo normally just few seconds and it's halt again. I bought everything from your store in the description and following step by step in this video. Now, my xbox looks like halt forever after can boot 3 times but I can still read/write NAND and write Matrix V1 Chip. Can I un RGH to origin XBOX? or Please suggest some solutions for me.
You can always disconnect the glitch chip's power, and write back the original nanddump1.bin file to the nand and the console should behave as a normal retail. When you say "halt" you're saying it freezes? Did you follow the wire routing suggestions?
Yes, "halt" is mean freezes. The power button showed red light, the fan is stopped and it has sound beep every time when I touch the power button. If I want to write the original nanddump1.bin back, the Retail should be selected right and CPU key has to be blank or put in it? If you have time, please post the guideline how to turn RGH XBOX to the original. By the way thank you very much for responding.
Just load "nanddump1.bin" in the source box, the CPU key area can be blank - that's fine. Then click "write nand" and write it back to the console and disable the power to your glitch chip. Your console will be retail again then.
After I bought new Soldering Welding Iron(amzn.to/2wZAk08) and Magnifying Glass(amzn.to/2kdBKuS) to repeat your video guidelines. My XBOX is working now. I do not recommend who doesn't have good eyes and tools to do RGH because you will destroy xbox circuit board. By the way thank you very much #TheWeekendModder
It's hard to produce quality tutorial videos during a live stream. If I ignore chat to just mod and explain I get flamed, but then if I engage with chat I catch heat for not "staying on topic". Frankly it's just easier to record and then I can edit. So... IDK, I like the live stream idea but haven't quite figured out how to get it "right". Maybe I should just do a weekly Q&A while playing some game.
I’m really curious can you use a 4gb read write kit in a 16mb corona I’m not hoping for it but I really just want to know because it would be kind of funny to use the 4gb read write on a 16mb
@@TheWeekendModder thank You, with the tutorials that You made i was able to mod a fat jasper last week and now o bought a 4gb trinity mate black just for the kinect sensor with like 10$ it was only the console and the sensor and no power brick so i managed to power IT up with a PC powersupply and the console works great and the kinect also, so i will rgh this trinity to :)
So hope you reply as I'm stumped on this one...been making rgh for a long time and normally can solve issues myself but.... Got a x360 ace v3 café legit version so no fake. Running on a corona v3 with post fix adaptor. When she's not in the case she boots really fast and I mean instant. But when I put her in the case she won't boot at all. I cannot for the life of me find a reason. Nothing touching metal case and shorting. She glitches the way she should and she's in a low interference part of the xbox. Now I did spend a good 5 hours Trying different timing files as the original was so unreliable when booting.
I'd check really, REALLY carefully around all my wires that route from topside to underside of the board. I've found that if a wire's insulation is going to fail that it normally happens there. Beyond that - it'd just be a guessing game mate. :-0
very good tutorial. thank you! I want to mod my first 360 next month and need to order the equipment. Can you tell which programmer is better and why - XNAND or JR? Also, I've seen MrMario do a Dual-NAND install, but I wonder if that is worth it for me - I don't intend to pay for XBox Live anyway, and I assume you can't play online without paying either xbox live or some fishy 3rd party "service", so a dual-NAND install would probably not have any benefit to me or? I assume you can't even access your HDD-ripped games library when you run on the official Firmware, right? So only with physical disks, or can it access HDD games also? (sorry, never did anything with X360 before).
Hey i had ordered a matrix chip and a nandx. I need help I had connected my nand wires correctly but everytime i try to read my nand with the matrix chip installed i get a 0x00000 config and i checked my soldering and it's decent not too bad but i had desoldered and resoldered multiple times. I had desoldered the vcc and gnd cables and all of a sudden my nand x is able to read my nand again
"Yet to receive a response" makes it seem like I ignored you and that is NOT the case at all. You sent an email at 11pm my time last night and I answered it at like 8am... you need to chill out!
Le Mars When turn it on, it will show to xbox logo for a split second, then shut off and try to glitch the cpu again. After that, it will attempt to turn on, but my screen will stay black.
Update? Or do you mean wire? If you need to know the wiring layout just download Jrunner and go to Images -> Nand-X Slim -> Nand-X Corona Install the wiring layout for the JRP and Nandx is exactly the same.
I dont think it is the soldering theres no bridges and I've done quite a nice job I will check with a multimeter and compare voltage online, thankyou for the help
Hi; I have a problem with my xbox 360 slim. I opened it to clean it and change the thermal paste; when I closed it, the console does not want to turn on. I put a video here: th-cam.com/video/QwNinToVElI/w-d-xo.html just so you can tell me the reason for this failure. xecuter coolrunner's green light flashes Awaiting your response thank u
Sorry - no way for me to tell the cause based on that... If all you did was open and clean it I would double check all the wire connections thoroughly.
TheWeekendModder perfect! But I just bought an 2013 e model with a Corona board.. I was planing to use an ace v5, do you have any experience with the v5 ace x360? Should I buy the v3 or stick with the v5?
Flash Config: 0x00000000 Can not Continue Can not continue Checking Console.. Version: 10 Flash Config: 0x00000000 Can not Continue Can not continue Checking Console.. Version: 10 Flash Config: 0x00000000 Can not Continue Can not continue Checking Console.. Version: 10 everything is soldered correctly and i have standby power whats wrong?? please help me.
The Weekend Modder aka _The RGH Guru_ in action, best rgh tutorials on TH-cam. Excellent.
Thanks a ton weekend modder! My dad and me managed to rgh my Xbox 360 using this guide! Can’t thank you enough! Would’ve bought parts from your store but I don’t think it ships where I live. Again thanks a ton!
TWM : done Muffin on my Trinity tomorrow using CR rev.C and it's great :) 20s boot to Aurora and working great. Thank you for your guide once again!!!
You're very welcome!
iv recently being trying to do this to my Trinity board console but I think I messed up the cpu_post pad as the solder wont stick anymore to it, I have all the other points soldered just this one was the issue. I tried a system boot earlier and it did boot and was working but of course im stuck at this stage
Another super guide. I glitched a 4gb trinity using your guide. Boot takes 10 secs vs my 1.2 RGH Jasper on 15 secs. Maybe the Jasper could be fine tuned more. But very happy with the result, was fun trying a slim and using another chip.
Thanks again !
My falcon boots straight away why does it take so long for you?
im not sure what you're filming with but an exposure and focus lock would be really good to help with your videos. I know on the iPhone you just tap and hold on the point you want to focus on and it will lock on that. Thanks for the guide, just picked up a Trinity.
I'm using OBS and some 1080p Microsoft LIfecam webcams. Thanks for the tips I'll see about incorporating those suggestions.
TheWeekendModder bro get a better camera and stuff! I don’t watch you’re videos all the way because of the video quality, if it were better I’d probably watch them start to finish just for fun
@@asdalskdf I can understand the concern, especially with this type of specific job, but it had good shots where it counted, everywhere else, and I think the pacing and level of detail was balanced and ample.
Pysis that’s not the point of my comment lol read it again and see what I’m saying
Huge and Many THANKS to WeekendModder. This tutorial turns my crap Matrix Glitcher V1 ALIVE! Once i though i had bought a damaged glitcher chip from Taubou from China,and now i found that i had mistaken on it. Though CR4 Muffin RGH2 method is not the latest and fatest one, this tutorial still demostrates its great value!
Such a great channel i've ordered from him multiple times as i am a console modder myself and ALL of his products are quality or take minor modification explained before adding to cart. Thanks for the great content #TWM
Xbox 360 has a new update
Followed this to a T last night on my first successful 360 hack!! Thanks so much!!
Followed your video in real time and achieved near-instant boot. Thank you so much!
Xbox 360 has a new update
randall wilson what does this affect ?
You deserve more subs.
For some reason I can't get a cr.bin any reason why.Both my nand dumps are the same but no cpu key when I try to read back bin file or extract the files?
I thought I had done everything correctly, the blue light is on on the glitch chip. The xbox boots up correctly but when I plug in my usb the xex menu doesn't show up in the demos folder. I made sure the file is located in the hidden content folder. I'm Lost any suggestions?
You know, I've done a handful of phats, but I have never got the "0x00000000 console not found" until trying to do a Trinity. I was looking at the thing under a microscope, tried a different programmer, resoldered 3 times, it's perfectly done... nothing.
Then plugged it into a different outlet... thanks man.
how to fix wrong header pls. help : Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
What are the limitations on hard drive storage?
this is only single boot method correct? the viper is required for dual nand?
Ok before i do this
Do i have to be on a certain firmware of dash it doesnt matter?
I think I lifted the post pad on the back of the board. Is there an alternate point for me to solder to or a way to jump/repair that spot to continue on?
I'm read the nand, and got ready to program the Matrix V1 and got "device not found", looked down at the chip and the blue led faintly comes on for a millisecond each time I wiggle the header pins. Any advice?
Take a very close look at the matrix chip for any cold solder joints or things that look like they are disconnected or bridged/connected where they shouldn't be.
at 19:00 in the image of the matrix v1 chip you're using for illustration I can see some components where the solder paste has not fully flowed during the smd reflow process. The MLCC capacitor above Vcc and to the left of the word SLIM looks bad. The one directly above RST towards the top of the image also looks half baked.
If you see this kind of thing its a good idea to add a little flux and reflow with a soldering iron. Dry joints like this will lead to anoying intermittent problems. Or worse components falling off the PCB.
good tips!
my matrix v1 chip will not stay blue after connecting it to the JR Programmer. it blinks once after i connect it. I tried soldering the wires onto the chip and it didn't make a difference
Can anyone tell me where to get the timing files from? I've tried to access all of the sites recommended and they appear to be down, maybe my ISP, not sure. Had to download a load of utilities including J Runner from a google drive but cannot see the timing files in amongst them. Any help would be appreciated.
Take a look at the video on this channel titled weekend modern j runner edition and there is a pinned comment with the latest dashboard version and it has all of the timing files in that download
Thank you, you’re a life saver, looking forward to working through this tutorial tomorrow. Thanks for the content
Great video. The music is a little distracting, though...
Just finished the video. One question about these items on the store: the matrix v1 has an option to have something preprogrammed. I've watched this video, but I'm not sure what to select here. The extra buck is worth a little less effort on my part, but this isn't really explained in this video.
Please do a video on how to get the jrunner driver installed. Having The hardest time with that right now
It's not all that complicated, if you google it you'll find the process.
What's a DIY home alternative to a scratch pen?
what cable is used to connect jr progarmmer plz?
also for a coolrunner rev c on trinity does anything need to be changed about the chip becuase on the website it syas remove capactitor but i havent seen hat anywhere else?
Hey im thinking of getting me a xbox360 trinity model and thinking of supporting you n your site by buying the matrix glitcher v1. if i get the trinity programmmed one do i still need a programmer? also any additional things i should be looking at or have?
what do i do if the xbox doesn't turn on after i copy your video should i reprogrammed the matrix and do everything all over again
Hey everytime I try to write the to viper nand I get a error 202 writing block 49 what's it mean? How can I fix it?
Hello, Friend! Can you help me please. I have 2 XB360 (Trinity and Corona 4gb). And i buy JR Programmer v.2 and matrix glitchers v.3. Can i programming this chips with J-R Programmer v.2? If yes, can you explain me Dummies, how doing this))) Please!))) Good day!
JR Programmer: v2 with come with wires for dumping nade for falcon ?
Yes
@@TheWeekendModder I'm trying to buy the Jr programmer from you and USB but it keeps saying every time putting in card decline from ur end
@@CurrentGenGamesWithNick you are trying to use a different shipping address from your billing address. I require the billing address and shipping address to be the same.
@@TheWeekendModder I tried three different cards it keep saying on your end declined I don't know why I just use that Dunkin it's the same as the billing address order for the x flasher and nand wires
@@CurrentGenGamesWithNick all I can say is that every attempt was triggering my shipping/billing mismatch filter. Maybe use Amazon Pay? It's free and then doesn't have that restriction. You can still use whatever card you like
I have holes where all but 2 pads should be for the nand read and glitch chip.. the glitch chip side has no pads to solder to at all! what can I do?
I'm not that clear on what you are asking or stating. If your issue is just that on the Xbox motherboard the headers to solder the programmer for reading/writing are through-holes that is totally normal. They are through-holes on all the motherboards just often filled with solder. Use some flux and apply solder and it will fill the holes and you can build up a little pad of solder just like I do in the video.
Yes, that answers my question entirely. Thank you!! I just had so many through-holes on the right side header that it didn't seem right. After clearly watching you yolo the solder into the through-hole and it globbed over nicely I figured I could do the same. I wanted to go with the ace V3, is there any major difference between Matrix and Ace v3? This is my first RGH so I'm likely following this guide to a T either way.. Thank you again. You replied quicker than se7ensins whole freaking community -_-.
The Ace chips have had some quality control issues with the release of the brown tinted pcb "cafe" versions, but if you can get good ones where the PCB is black (I have some on my store) then the Ace install on a Trinity is just slightly better as far as boot times go, but it's just a slight advantage. The matrix v1 muffin Trinity install is a markedly easier install though.
functionally to the end result, there is no difference.
So definitely going with the matrix. Ordering from you because of the pre programming option which is a nice touch. The matrix is marginally more at other stores too.. I may just grab a nand x from you as well.. It's not a jrv2 but it'll do the trick.. Will this work for wire? I know you suggest one at the store but I want more colors as to not get confused myself lol www.amazon.com/gp/aw/d/B01KQ2JNLI/ref=psdcmw_495310_t2_B008AGUAII
That and I may do more of these seeing as so many people are retiring them now days. Its almost a waste of a console using it stock... Lol. Thanks again, man.
The Nand-X is a better device than a JRPv2, so deffo go with that. The only advantage the JRPV2 has is the "rater" functionality which only works with CR4 chips and RJTAG chips which no one has or uses these days.
I’m new at this, I ordered a matrix v3, I read in the comment that you should disable the crystal oscillators for a Trinity console, how do I do this and are there any other changes have to make? Are the timing files the same?
On the matrix product pages on my website there are images that show the resistor to remove to disable the crystal. The timing file is the one suggested in the video appropriate for your motherboard.
TheWeekendModder thank you so much
Hi there. I'm just about to start a Trinity 2010 mod using your above video. I have a J runnner V1 programmer and just found a brand new Coolrunner Rev C in my parts box. Following the above tutorial and swapping the A,B,C points on the coolrunner is that all I need to change? Are the timing files the same on a Rev C as the Matrix V1 you are using? Many thanks and great work.
Yes, just the point differences. Timing file is the same.
@@TheWeekendModder Many thanks. Is there any disadvantage in using the coolrunner over a any of the other current chips?
Is Post signal Important because is Removed on me during make a new thermal paste
Yes, post signal is required. Sounds like you need a postfix adapter.
@TheWeekendModder what kind of solder should I use must be iron inside ? Just need to repair the post part.the Whole cable is Remove
@TheWeekendModder only the B port is Empty Also on the backside
@@Kurdischerjapaner 60/40 tin/lead is what I use. Rosin core is fine.
@@TheWeekendModder in Germany they only sell Iron free but with Flux.Can i still Use it ?
Is this better than Ace V3?
It is an easier install, better for n00bs but not necessarily better performance.
Thank you very much for all the info! I already rgh my Falcon xbox with the Matrix V1 with your help. One question please. Does the technique on this video work with a Trinity console with the 17559 dashboard. Thanks again!
@Mahdi Sakr Thanx! I already tried it. Success!
i cant buy from your store it doesnt show the big "Amazon Pay" button.... can you please help?
Send screenshots to weekendmodder@gmail.com and we'll get you sorted out.
TheWeekendModder will send some tonight
I ordered from him about a week ago and already got what i ordered. Great service.
Windows 10(64 Bit) doesn't recognize my JR Programmer. I disabled driver signature enforcement but it is not recognized. I installed the drivers that came with JRnner 0.5 but no luck. Any tips on how to get it to work? it worked before, though. Thanks in advance.
After installing windows 7 i got the JRP to work. I then learned that it was stuck in bootloader mode. Reflashibg its firmware solved that. Next, i tried to follow your tutorial on your page (the pictures) for a muffin install on my trinity console with a CR Rev c. But the referencek images and explanations for the muffin method especially with the coolrunner are confusing as far as the wiring and soldering points for the coolrunner are concerned. Is there any addition infos on this?
There's a full written tutorial at weekendmodder.com/RGH-falconjasper.html
My console takes around 10 minutes to boot, is the timing file you used THE timing file for this setup or does it very between device?
I sometimes flex the timing file up or down one, but rarely. For boot tuning I'd suggest that you try varying the length of your RST wire.
Quick Question. When I receive my Nand-X does it come with Glitch Chip programmer wire for Coolrunner rev c or Ace v3?
If you bought a NandX from me it comes with the "nandx to CR programming cable" that will let you use it to program any glitch chip.
TheWeekendModder could you JTAG my 2011 Xbox 360 slim and how much would you charge
WatchOutBro that would cost 40-80 from a decent modder as long as you don't want any extras
Mr Behexed thanks So how long would it take to jailbreak it
WatchOutBro I can't say for sure, an experienced modder would most likely be able to do it in a day
Never have I seen such a detailed tutorial. If you aren't a teacher, you should be.
*raises hand* question: I'm getting a white 4GB Slim model and I hear they're most often Corona, besides doing NAND differently at the beginning, are there any other steps I must take to for a good outcome? (Assuming IT IS in fact a Corona & I'd be using all of the same chips)
Great tutorial the best I seen ever, I got a question, I have a Matrix V3 do you have a diagram?, because I soldered but it does not turn on, I only hear a beep when I try to turn it on but it does not turn on the lights, I looked for diagrams for this glitcher but none of them has worked so far, thanks for your help.
Never worked with the Matrix V3 - assume it'd be the same as the V1
I'm going to get some of you're stuff but why does a trinity need 10 rolo lights
2 per quadrant and two in the center
@@TheWeekendModder oh ok do you only take Amazon pay because I did not see bank card
You have to go all the way to the last step in checkout and it will prompt for direct credit card checkout.
I got a trinity dashboard 13146 and I have installed matrix v3 using your tutorial, but it doesn't boot xell. I have tried all the muffin files and nothing happens. I wondering if my dashboard is the problem, should I update my dashboard to 17511?? What do you think?
Yup. Update to current dash then restart your mod.
@@TheWeekendModder Thanks bro. I will do it tonight.
@@TheWeekendModder hi there. I can't update my xbox, I have tried the dashboard 17511, 17526 and I got message "update failed status code 335A 4467 1600 0700 C000 000E" I restored the original nand.
Where can I get the muffin folder to program the chip?
You could search for the "weekend modder Jrunner edition" video and download the whole set, or if you go to my store and look at my matrix glitcher listing I have a link right on there to the muffin timing pack you can download them.
I have got an XBox 360 with Dash 13599 i want to RGH 1 it.
But i can´t find an Diagram for the Matrix an RGH 1. Do you have one ? And what Timing file i should use ? Thanks :)
I wouldn't bother with RGH1. RGH 1.2 gives you the same boot times and you don't have the freezing fussyness of RGH1. So update to current dash and then do RGH 1.2
TheWeekendModder ok thanks.
hey buddy, would you be able to direct me to a store that sells the viper dual nand chips and will ship to aus? i cant seem to find any via a google search, any help is appreciated thanks
Sorry, themodshop.co might have a list of other vendors - but I'm all sold out.
TheWeekendModder they only have you listed as a reseller o their site haha, I’ve contacted them as well, just waiting for a reply! but would you know when you’d have them back in stock
Thanks
It's going to be a few weeks at the earliest.
TheWeekendModder no worries appreciate your help :)
Possibly going to do srgh for a viper dual nand . But for future reference can you do Muffin with ace or should I do the Cr4 speed up method or srgh?
No muffin method using Ace exists that I'm aware of. If you're going to do a viper you need the Ace v3 and that would be an SRGH install.
Hey man i recieved my stuff today, I made a mistake in not noting down the dashversion before installing the nand x, install shows it worked in j runner, do i need to desolder all the points again to boot the xbox to take note of the dash version? thanks alot
Once you read the nand you can tell the dash version from the CB values in JRunner. also - you can just disconnect the nandx from the wires and boot normally - the wires being in won't stop it from booting.
TheWeekendModder I went ahead not long after and read the nand. All up and running on my first go. Trinity boots between 10-45 seconds. Over the moon. All thanks to your videos bud. Tomorrow I'm doing a Jasper and I ordered a cool runner from eBay to do a falcon. Thanks alot man
im trying to get into the rgh selling business. are these all the items i need?
No you need some more items like wires
Plus it’s 2020 nobody wants a rgh anymore
@@ChapoGuzman896 2 late
What kind of solder is he using
60/40 tin lead with rosin core. Kester brand. .3 diameter
Quick Question. Will you ever sell the viper dual nand chip again as I noticed that it was removed from your store? Thanks
Probably. Modshop (the creator of the Viper) is doing a development cycle right now so if and when he has more to sell I'll deffo consider carrying them, but for now I'm out.
TheWeekendModder oh ok I will keep an eye on your website for it
What's the diffrence between rgh 2.0 ace v3 installs and muffin installs theweekendmodder
Ace V3 is technically "S-RGH" as released by 15432 and uses typical RGH2 style wiring. The "muffin" technique timings were also released by 15432 but they emulate the TX CR4 style wiring which uses the DB2G3 point and doesn't make use of E or F. Given the quality control issues that Ace V3's have had lately I'm leaning heavily toward the muffin installs using Matrix chips.
I'm kinda not liking the ace v3 installs aswell I always have problems with timing files
It's the quality of the recently mfr'd Ace chips. The older ones were the bomb-diggity and worked great!
TheWeekendModder do you recommend me to move towards the muffin installs then or still do ace v3
when i go to buy a matrix v1 it says its for corona boards
A matrix can be used to do either a Corona or a trinity.
I have a matrix glitcher chip left without oscillator and a corona. I'd like to buy one but I don't know which I have to pick up. They look all the same for me!
salvo puglisi i think you can buy the crystal on theweekendmodders website
You need to read it literally says which one is for which console
With Crystal = for Coronas. Without crystal = for Phats and Trinities.
TheWeekendModder yes, I know. I asked where can I buy Only the crystal because I have a spare chip without it and, I need it in order to install the chip on a Corona
Ah, k. It's a standard 48mhz crystal. Never tried buying them solo so not sure where to send you for it. Mouser, digikey I guess? Usually they're spec'd by size - so you'll have to measure the pads on the chip to figure out what physical size you need.
I hear that you say you've been getting faulty ace v3 chips from recent manufacturing, would you say it is safe to buy the 2015 model as advertised on ebay or will they throw in the recently made ones as well?
In my experience, anything that is the newer "cafe" color (kinda brown tint to the PCBs) is sketchy. But photos on eBay are showing black, but then sending cafe color. So frankly- I don't have a good recommendation about where to buy good ones. I managed to talk my supplier into specifically finding old stock for me, and I bought all 200 of them they had. They'll be up on my site for sale in another week or two when they come in.
Hello. I have a question, is it possible to build nand without having CPU_KEY? Trinity motherboard.Thanks in advance for answer
No, the CPU key must be known in order to build a new nand image. If you don't know the CPU key of a console, you can generally write the appropriate ECC file to it, boot Xell and get your CPU Key that way.
Thank you for the answer. The problem is that the console does not want to boot. I already got it RGH. I know what happened to it. The green LED lights up and nothing else. So I wanted to enter the original NAND to check the error code, because with the entered XELL show.
How do you know if an Xbox s is a trinity or corona , the mfd is 2010-12-01 and the amps are 10,83
There will be something on the power box attached to the cord that will say either 12V---10,83A or 12V---9,86A. The 10,83A is the trinity and the 9,86A is the corona.
That's a good indicator, but I've found LOTS of mislabeled consoles. 10.83 labeled that turn out to be Coronas and lots of 9.86 labeled that turn out to be Trinity.
TheWeekendModder Ok thankyou
Hi, Ive successfully done my first RGH1.2 on my old Jasper Yesterday by using a coolrunner and jr programmer
however I also had a trinity console and matrix glitcher so i attempted to rgh it today using your guide and after following all your steps,
my problem is when i go to power the console on to get into XELL for the first time with the glitcher
i plug it in and i just see the blue led light up on the matrix before even powering on the console and when i did, the blue led just continued staying lit and didnt blink at all on the matrix so my xbox wont glitch
could you help me with any tips that i could try to fix this problem ?
Thanks!
same problem here , idk whats wrong
Why are there so many xbox 360 models anyway? What are the huge differences besides HDMI .
HDMI was added early in the launch phat model, so HDMI really isn't even a differentiator.
Can you use a J-R Programmer V2 with the x360 Ace v3?
Yes, absolutely
@@TheWeekendModder Thanks for the reply, I just ordered the matrix v1 just incase and some 6 pin headers from your site :)
Thanks a lot weekend modder you are amazing
im on dash 2.0.17526 JR shows 17511 can i still write ecc file and proceed
No if you got to the his jr programmer download page it says in the description how to update it
10 -12 years ago I modded 17 trinity consoles watch ur videos. Today as i was going through my storage, I came across my modding t. Ive got a few Ace v3 chips left. Im gonna sit back and make a list of whatll I need. Is ur store still open????
@@garciajr4413 yes
Good tutorial.. But doesnt it ruin your southbridge?
Muchas gracias por la traducción , le quedó excelente
i want to rgh my xbox slim Trinity following this tut but the jr progammer is not on your store any more, know where i can find one?
I've got nand-x's as a substitute (they're better devices) and the JRP will be back in stock in about a week to ten days.
TheWeekendModder what about the matrix glitchers?
Still plenty of those in stock on the site.
oh for some reason i saw out of stock, but now it says add to cart, will buy one, also, should i get the JRP or have you pre-program the matrix glitcher since this is my first time ever sautering and modding the xbox?
TheWeekendModder oh and sorry to bug you again but if i get the nand-x chip will it be the same process for installing and writing the nand as you do with the JRP
Hi weekendmodder, is there a way to remove hacked firmware off a flashed DVD drive? Recently I un-jtagged my Jasper 256mb, it was originally on the blades and it is now, I already knew I wasn't able to use the DVD drive once I reflashed the original nand, but is there a way to remove the firmware? I un-jtagged it because I wanted it on the blades, yes I know I can't use any jtag programs or play newer games, but I have other consoles so I'm okay, I just want this jtaggable to be clean like it came out of the factory. Thank you. Oh and I get e69 when the DVD drive is plugged in.
The e69 tells me the DVD key in the drive probably doesn't match the motherboard. It is possible to re-write a drive's FW with retail. Do you know the DVD key for the console? Are you sure the drive matches?
TheWeekendModder actually yes, i bought this system brand new in the box from a seller on se7ensins and got it jtagged, I'm positive this is the matching drive
But the problem is I don't have any of the flashing tools, it's a dg-16d2s
I have a trinity Xbox 360 i wanting to put a mod chip in and im wanting to know can you run it without the disk drive installed? Im wanting to put all my games on an external hdd and hard wire it to the 360's usb and install it where the disk drive normally is.
Yes, you absolutely could run a modded 360 without a disc drive and play all the games from HDD.
Okay one more question, how big of a external hdd can i install?
2TB is the max size the 360 will recognize
Per usb or total?
Per device
Is the flux paste absolutely necessary?
Yes
@@TheWeekendModder ok thanks
My XBOX Trinity 4G is halt after XELL booted few seconds but I still have time to get CPU key and then follow the last step to write NAND. After I re-plug everything together, my xbox booted and showed logo normally just few seconds and it's halt again.
I bought everything from your store in the description and following step by step in this video.
Now, my xbox looks like halt forever after can boot 3 times but I can still read/write NAND and write Matrix V1 Chip. Can I un RGH to origin XBOX? or Please suggest some
solutions for me.
You can always disconnect the glitch chip's power, and write back the original nanddump1.bin file to the nand and the console should behave as a normal retail. When you say "halt" you're saying it freezes? Did you follow the wire routing suggestions?
Yes, "halt" is mean freezes. The power button showed red light, the fan is stopped and it has sound beep every time when I touch the power button. If I want to write the original nanddump1.bin back, the Retail should be selected right and CPU key has to be blank or put in it? If you have time, please post the guideline how to turn RGH XBOX to the original. By the way thank you very much for responding.
Just load "nanddump1.bin" in the source box, the CPU key area can be blank - that's fine. Then click "write nand" and write it back to the console and disable the power to your glitch chip. Your console will be retail again then.
After I bought new Soldering Welding Iron(amzn.to/2wZAk08) and Magnifying Glass(amzn.to/2kdBKuS) to repeat your video guidelines. My XBOX is working now. I do not recommend who doesn't have good eyes and tools to do RGH because you will destroy xbox circuit board. By the way thank you very much #TheWeekendModder
how to buy item.ship to srilanka
Another easy way to verify it's a Trinity is power supply voltage on back of console no? Trinity is 10.83a
That’s a somewhat good indicator but it’s not 100% I have seen quite a few miss labeled coronas
Should I get ace V3 or should I use this one
The muffin install is easier for a noobie.
@@TheWeekendModder well I am a noob of course I never did this before
will this work on any trinity, im just making shure before I buy the chip thing
Yes - any Trinity.
thank you very much for your tutos, a question, would the solder points be the same with a matrix v3 whit cristal oscilator?
Ivan Garcia yes but you need to disable the oscillator by removing the resistor he pointed out if you have a trinity
Great tutorial, any livestream planned for the future? Really loved those..
It's hard to produce quality tutorial videos during a live stream. If I ignore chat to just mod and explain I get flamed, but then if I engage with chat I catch heat for not "staying on topic". Frankly it's just easier to record and then I can edit. So... IDK, I like the live stream idea but haven't quite figured out how to get it "right". Maybe I should just do a weekly Q&A while playing some game.
The Q&A is not a bad idea! Btw I think in this one the music is a bit too loud, it's kinda distracting.
I thought it was quieter than even the last video, but I'll take note to check it more thoroughly next time.
I’m really curious can you use a 4gb read write kit in a 16mb corona I’m not hoping for it but I really just want to know because it would be kind of funny to use the 4gb read write on a 16mb
No, you cannot.
So if I send in my Xbox 360 do I have to pay for all of these things or just the shipping fee
My send in service includes everything for the mod, even return shipping for just $75. Full details at www.sendin.weekendmodder.com
Do I need a certain amount of storage for my 360 if so would a flash drive with 100gb be fine
Is there a problem if the Matrix is v2 ???
Nope, should work the same
@@TheWeekendModder thank You, with the tutorials that You made i was able to mod a fat jasper last week and now o bought a 4gb trinity mate black just for the kinect sensor with like 10$ it was only the console and the sensor and no power brick so i managed to power IT up with a PC powersupply and the console works great and the kinect also, so i will rgh this trinity to :)
So hope you reply as I'm stumped on this one...been making rgh for a long time and normally can solve issues myself but....
Got a x360 ace v3 café legit version so no fake. Running on a corona v3 with post fix adaptor. When she's not in the case she boots really fast and I mean instant. But when I put her in the case she won't boot at all. I cannot for the life of me find a reason. Nothing touching metal case and shorting. She glitches the way she should and she's in a low interference part of the xbox. Now I did spend a good 5 hours Trying different timing files as the original was so unreliable when booting.
I'd check really, REALLY carefully around all my wires that route from topside to underside of the board. I've found that if a wire's insulation is going to fail that it normally happens there. Beyond that - it'd just be a guessing game mate. :-0
I'm going to try some more timing files while she has all the parts in as I can then find a good file that works with the pulse
what is your lifestream equipment? with programms and all
What happens if you write the ecc file twice
Nothing that's fine.
TheWeekendModder okay thank you!
TheWeekendModder hey I just bought the matrix v1 without the oscillator
i'm using matrix v3. When I put the vcc wire i cant to start the console...just bip
You've probably forgotten to disable the onboard crystal oscillator. You can't have both a crystal and connect the CLK point.
@@TheWeekendModder Thanks brother! It's was my mistake!
very good tutorial. thank you!
I want to mod my first 360 next month and need to order the equipment.
Can you tell which programmer is better and why - XNAND or JR?
Also, I've seen MrMario do a Dual-NAND install, but I wonder if that is worth it for me - I don't intend to pay for XBox Live anyway, and I assume you can't play online without paying either xbox live or some fishy 3rd party "service", so a dual-NAND install would probably not have any benefit to me or?
I assume you can't even access your HDD-ripped games library when you run on the official Firmware, right? So only with physical disks, or can it access HDD games also? (sorry, never did anything with X360 before).
Thanks for the guides really helpful and well made , I just have one question , can I use matrix spi instead of Jr/nandx ?
you can for nand reading and writing - however a matrix spi nand flasher generally can't program timing files to glitch chips.
TheWeekendModder alright thanks!
Hey i had ordered a matrix chip and a nandx. I need help I had connected my nand wires correctly but everytime i try to read my nand with the matrix chip installed i get a 0x00000 config and i checked my soldering and it's decent not too bad but i had desoldered and resoldered multiple times. I had desoldered the vcc and gnd cables and all of a sudden my nand x is able to read my nand again
I even tried booting it and i seen the chip won't even flash the blue light
I've sent you pictures on email yet I still have yet to receive a response
"Yet to receive a response" makes it seem like I ignored you and that is NOT the case at all. You sent an email at 11pm my time last night and I answered it at like 8am... you need to chill out!
TheWeekendModder truly sorry my fault for not checking my apologies man
Xell crashes on boot, any suggestions, i followed this tut
I think you texted me? FIgured out it worked with an AV cable, right?
I bought a RGH from you a while a ago. I cannot get it to boot. I looked it up my problem on youtube, but no one their solutions worked.
Kkhalifa bypass plugins
What do you mean it cannot boot that’s a very vague thing to say
Le Mars When turn it on, it will show to xbox logo for a split second, then shut off and try to glitch the cpu again. After that, it will attempt to turn on, but my screen will stay black.
Kkhalifa take the harddrive put see if that fixes it
Joshua Hutton Tried that, didnt work.
thank you after you email me to redo everything it work your work is amazing thank you for everything
Xbox 360 has a new update
song 14:40 ???
These are all YT's freely licensable built-in music.
Can you show how to update the jr programmer for corona 16mb?
Update? Or do you mean wire? If you need to know the wiring layout just download Jrunner and go to Images -> Nand-X Slim -> Nand-X Corona Install the wiring layout for the JRP and Nandx is exactly the same.
TheWeekendModder no I dont know what driver I have to download for it.
JR programmer drivers are on the JR programmer page on my store. Inside the download are instructions.
TheWeekendModder ok thanks!
I dont think it is the soldering theres no bridges and I've done quite a nice job I will check with a multimeter and compare voltage online, thankyou for the help
When I try to boot up the console I get a flashing light
U failed
Hi; I have a problem with my xbox 360 slim. I opened it to clean it and change the thermal paste; when I closed it, the console does not want to turn on. I put a video here: th-cam.com/video/QwNinToVElI/w-d-xo.html
just so you can tell me the reason for this failure.
xecuter coolrunner's green light flashes
Awaiting your response thank u
Sorry - no way for me to tell the cause based on that... If all you did was open and clean it I would double check all the wire connections thoroughly.
Ok thanks
Still good for 2019 trinitys?
Yup!
TheWeekendModder perfect!
But I just bought an 2013 e model with a Corona board..
I was planing to use an ace v5, do you have any experience with the v5 ace x360?
Should I buy the v3 or stick with the v5?
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
everything is soldered correctly and i have standby power whats wrong?? please help me.
"everything is soldered correctly" are famous last words. Post pics?
TWM thank You for yours guides. A week ago I've done Jasper RGH with Matrix V1 and now I've Trinity to do. Can I use CR ver.C instead of Matrix?
store.weekendmodder.com/image/catalog/Trinity_Rev_C_Muffin_Install.jpg
TheWeekendModder Thank you. I've found this bit earlier :) What is the real boot time with this Muffin mod?
Sub 30 seconds for sure.
thank you indeed TWM. Will do rgh this weekend and we see :)