REWA please help. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Why is this and how do I remove it? Thanks
I mean if we could only just take the battery out and place a new one in but no, we need a million cables and reprogramming hardware to replace a battery.
Rewa: If an iPhone 12 has battery health 80% and you replace it with a new battery, without programming and moving the BMS board, would the phone still drain fast because it does not show the health?
Hi REWA appreciate all videos, we see you made one on the qianli tool and software version of this method.. however we are having trouble with qianli tool being consistent for this repair.. do you recommend REFOX as the number one programming tool for battery work? Thanks in advance 🙏🏻
@@rewatechnology2008 have you tried to upgrade a battery this way with another battery from another iPhone that would fit in shell still and be intriguing to see if you could make adapter for the iPhone same way so that people can use any battery that they want
Hey Rewa 1. Can I remove the tag on flex after the programming and activation part? And can I use one tag on flex more than one time? 2. I have a qianli icopy plus 2.1. Can I program and activate the battery with that programmer also? 3. Does the battery without bms board comes with the plastic bracket and a new insulation tape?
hey all, unfortunately i damaged the connector from the original battery, i bout some genuine iphone 11 flex but now i am still getting uknown part, does it has to be the same cable in any case even though i bought some genuine battery cables from aliexpres and soldered them on,
great work and solution as always. Has anyone tried transplanting the major components of the original BMS board to a new original battery? I'm trying to fix a phone where I received a damaged BMS, tried jumping the damaged lines but the board doesn't work. I have no luck finding a schematic and is looking for a fix. I hope someone can suggest which chips are essential in carrying the battery info so I can try and move it to another BMS. :)
If this worked then you should be able to put the original battery back in. But when I put the original battery back in. it still gives me the same message with a 0% warning.
I bought this program but it’s doesn’t work with the flex cabel , it’s doesn’t read the battery unless I connect the ba3 directly and it’s frustrating cause ends up showing error
@@rewatechnology2008 you didnt use it for final instalation ;) cant see it on the video,you did put new battery in to the phone without tag... i wont be paying another 10$ for stupid tag every battery replacement... hopefully there will be another solution in future
After reprogramming it I plugged in the battery to the phone to see if everything works fine. The battery capacity is still the same (86% in my case) so my programmer didn't work. I tried reprogramming 3 more times. Nothing has changed. Software and programmer shows battery health 100% but after plugging into phone (iphone xr) it shows 86. Why is that? How do I fix it? I would appreciate every help.
Great, another locked part. You suck Apple !!! Great solution Rewa, I am not gonna bother with it, simply ridiculous that Apple does this. You are right @Louis Rossmann :)!
thank you for this nice video, if I don't have the original battery so not the bms, can I remove the message from the battery indicating that it has been changed? Thx
Bro can you please tell me if we have old battery and install a local or a duplicate battery and follow all your process will the message show up? Or in simple words if we install a local battery following the process ,still can we remove the battery message?
You need the original battery that was in the device in first place. If you try to install a IC board from an other original battery the massage will still show up.
why apple keep doing this, normal ppl isnt going to replace the battery themselves anyway, and any repair center will eventually get devices like this anyway, so why.
Hey i have an iPhone 13 and it's got important Battery message for no Reason, it's never get a battery replace beside it's never open before also it's only run 6 months, the only issue i think is happend is i used a another charging adapter that all, is this is an apple where if you used another charging adapter you got an battery error, then it's not a smartphone Company its a piece of trash, i would bever ever buy anything from this brand "RIP apple"
Please reset the setting of your apple device 👍it really works
You can remove the battery messages by doing diagnostic ......
What is an average Cost for iPhone ‘11 pro battery change’ & remove ‘unknown part message ‘ ??
So the Tag on Flex can be used multiple times? Sorry if that's a dumb question, I'm new to this. Thanks for the video
It’s the same question that comes to my head
REWA please help. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Why is this and how do I remove it? Thanks
Be good if we could just read and write to a new battery.
I mean if we could only just take the battery out and place a new one in but no, we need a million cables and reprogramming hardware to replace a battery.
Do you need to remove the tag o you leave it inside?
Yeah we need to wield the BMS board to the third party battery
@@rewatechnology2008 yes I did that, but the tag that we used with the Rp30 programmer. It needs to be removed or lesve it with the battery?
Rewa:
If an iPhone 12 has battery health 80% and you replace it with a new battery, without programming and moving the BMS board, would the phone still drain fast because it does not show the health?
Apple is mad annoying for letting reparability go a longggg way like this!
Which software are you using
Hi REWA appreciate all videos, we see you made one on the qianli tool and software version of this method.. however we are having trouble with qianli tool being consistent for this repair.. do you recommend REFOX as the number one programming tool for battery work? Thanks in advance 🙏🏻
Hi, you can try REFOX RP30 as it is a reliable tool tested by our professional team with quality and functionality assured.
@@rewatechnology2008 hi if u change motherboard and again u have unknown part battery can u fixed?
@@rewatechnology2008 have you tried to upgrade a battery this way with another battery from another iPhone that would fit in shell still and be intriguing to see if you could make adapter for the iPhone same way so that people can use any battery that they want
Same here. it works about 50% of the time
Can you fix this issue without the old battery?
Hey Rewa
1. Can I remove the tag on flex after the programming and activation part? And can I use one tag on flex more than one time?
2. I have a qianli icopy plus 2.1. Can I program and activate the battery with that programmer also?
3. Does the battery without bms board comes with the plastic bracket and a new insulation tape?
you guys are as good as ifixit or even better
And please tell any way to know how to see the original battery health and battery cycle. As nowadays the batteries are boosted
if you remove tag on battery,does phone read original capacity without tag flex
hey all, unfortunately i damaged the connector from the original battery, i bout some genuine iphone 11 flex but now i am still getting uknown part, does it has to be the same cable in any case even though i bought some genuine battery cables from aliexpres and soldered them on,
This is a measure of battery capacity relative to when it was new. Lower capacity may result in fewer hours of usage between charges.
Very helpful thank you for sharing 🙏🏾🤗
is this cash on delivery? and how to order?
great work and solution as always. Has anyone tried transplanting the major components of the original BMS board to a new original battery? I'm trying to fix a phone where I received a damaged BMS, tried jumping the damaged lines but the board doesn't work. I have no luck finding a schematic and is looking for a fix. I hope someone can suggest which chips are essential in carrying the battery info so I can try and move it to another BMS. :)
It don’t bug me that much to do all thst
If this worked then you should be able to put the original battery back in. But when I put the original battery back in. it still gives me the same message with a 0% warning.
why my iphone 12 pro didn't have NFC option like on this video? i'm confused
I bought this program but it’s doesn’t work with the flex cabel , it’s doesn’t read the battery unless I connect the ba3 directly and it’s frustrating cause ends up showing error
Is the tag necessary only for reprogramming or even for final installation?
Some batteries are locked so you need it to change cycle count and change it back to 100%
Both
@@rewatechnology2008 you didnt use it for final instalation ;) cant see it on the video,you did put new battery in to the phone without tag... i wont be paying another 10$ for stupid tag every battery replacement... hopefully there will be another solution in future
@@dathremar1 if you look closely @3:18 the tag on flex is there between the battery and motherboard
Great work. Thanks for sharing
Is it possible to clear iPhone 15promax cycle count to 0 ?
Yeah JC programmer can customize battery health and cycle data
Does tag on flex need to stay on forever
It needs to stay on.
No
After reprogramming it I plugged in the battery to the phone to see if everything works fine. The battery capacity is still the same (86% in my case) so my programmer didn't work. I tried reprogramming 3 more times. Nothing has changed. Software and programmer shows battery health 100% but after plugging into phone (iphone xr) it shows 86. Why is that? How do I fix it? I would appreciate every help.
U need an another battery to pop up the message
Is it series 13 or 14?
did you ever fix this?? i am getting the same problem on iphone 12 pro max
Hi, when will you be shipping the batteries to Australia? Also, why is the spotwelding fixture not available? I can't add it to my cart.
Hi, please forward your requests to service@rewa.tech and our team will get back to you ASAP.
What is the battery called and where to buy it?
shop.rewa.tech/detail/apple-iphone-battery-cell-replacement-s-grade.html
It’s $90 at apple to get the battery replaced fyi
and after 3 months 80 percent of battery swollen or explode..
I love you channel
any solution if don't have old original battery?
The original battery is needed.
Will this work on iPhone 13
Yes, it works on iPhone 13
hello dear friend i need your help i need tools for iphone battery activation devices all what belongs to buy can you please help and inform me
shop.rewa.tech/detail/jcid-bt01-battery-fast-charging-board.html
Do i need to activate the iPhone with a power supply? Is there an easiier solution?
You can use another battery to activate the phone.
@@rewatechnology2008 is it neccesary to activate the phone ? Cant we just remove old and install New modified battery ?
Is there a solution to the unknown part warning for the camera?
Very nice !
what kind of tool is it for prepare of spot welding 1:33 ? Thanks
It is a grinding pen.
Martin can you please send me your email please
I change my battery in a local shop. Now battery health is not showing?
What i can do?
Which model?
@@rewatechnology2008 XR 64gb
Use a MacBook and a software called “coconut battery” you can se the battery health and cycle count that way . Tank me later .
@@ciprianbeniuga5042 i sold my phone,btw thanks for information
Does Rewa sell the tag on the website? I don't see it.
Please check the link for details. shop.rewa.tech/detail/refox-rp30-multifunctional-restore-programmer-for-iphone.html
i want bacome a reseller of this product in Indian market... would you sr
Please contact agent@refoxteam.com
@@rewatechnology2008 how can purchase the product
Very nice
i dont get the part at 2:55 why do u need to connect this wire and for what it needs to and where it come from ? from the multitool?
It connects to the motherboard which is for determining if the battery is faulty or the motherboard is
Great, another locked part. You suck Apple !!! Great solution Rewa, I am not gonna bother with it, simply ridiculous that Apple does this. You are right @Louis Rossmann :)!
thank you for this nice video, if I don't have the original battery so not the bms, can I remove the message from the battery indicating that it has been changed?
Thx
No, you can't.
My phone genuine bms board has no voltage also not working😫😫😫 wht can i do i have no option
Not working for iphone 13 / 13p max / 13 pro
But this is a way for scammers to sell batteries with less power to customers as 100% batteries.
How can they do that?
@@FRIGYES10 insert a dead or dying battery (scrap). and then reprogram the board to say it's at 100%.
easy scam
@@aroberts3213 then find reliable technician and ask for additional service warranty
@@aroberts3213 Yeaah business is business
@@aroberts3213 maybe if you live in a shitty country😂 what man has time for that. Waste of time and money
Bro can you please tell me if we have old battery and install a local or a duplicate battery and follow all your process will the message show up?
Or in simple words if we install a local battery following the process ,still can we remove the battery message?
You need the original battery that was in the device in first place. If you try to install a IC board from an other original battery the massage will still show up.
Too bad we still need the tag on flex :(
Nothing new here..... Same old procedure 12 months old
why apple keep doing this, normal ppl isnt going to replace the battery themselves anyway, and any repair center will eventually get devices like this anyway, so why.
Hey i have an iPhone 13 and it's got important Battery message for no Reason, it's never get a battery replace beside it's never open before also it's only run 6 months, the only issue i think is happend is i used a another charging adapter that all, is this is an apple where if you used another charging adapter you got an battery error, then it's not a smartphone Company its a piece of trash, i would bever ever buy anything from this brand
"RIP apple"
Me with 73%. Battary health 🙂
And how many hours does it last? thank you for your Answer
Waay more work than it’s worth... lmao
haha fuck okay at this point I give up ... Rip iPhone :D
just go to apple will be cheaper
Well this is some utter nonsense. Never ever buying apple crapple again.
👌👍
second