✅NEW UPDATED 2019 MAKE INTO PVC SHEET USING BIG PVC PIPE.

OTHER RELATED VIDEOS : • ✅ MAKE 3" PVC PIPE INT... • ✅NEW UPDATED 2019 MAKE... • ✅ HEATING 4" INCH DIAM... • ✅ NEW IDEA HEAT PVC PI... • ✅ HEAT BEND PVC PIPE O... • ✅ HEAT BENDING PVC PIP... • ✅HEAT GUN PVC PIPES / ... • ✅HOT BOX HEAT PVC PIPE... • ✅SIMPLE QUICK WAY TO H... • ✅HOW TO BEND PVC CONDU...
Disclaimer:
These videos are to help people that like to modifier, change, make work better, and so to also make your own DIY version.
These are only guides on how to.
not meant to be anything else
BAGONG UPDATE 2019 MAKE FLAT BOARD GUMAGAMIT NG BIG PVC PIPE.

[@josemanuelmonjeguillen7266]

Good work.!! The Best..!! Congratulations sir..!!

[@fran2911]

You're a genius, this made my life so much easier

[@edruceross]

Thank you!!!! This is genius

[@baduraldeenali2411]

Nice work.. really I was looking for.. thank you

[@mingyi9838]

Useful tips. Thanks.

[@chefbulengcorp9751]

Thanks grandpa

[@ChandraMCraft]

Very good 👍👍❤

[@Louie-Ruiz]

What is it used for?

[@JasimJasim-kf3tw]

👌👌👌👌 good അടിപൊളി

[@rontron418]

Thank you for the tip. I was looking to make a bike battery box. Can you hear two pieces together?

[@michaelgasperik4319]

Regular pvc glue. Also, you can draw a straight line, use the heat gun to warm it up again and bend it to whatever angle you need. I use a 2x6 screwed to a 2x4 to make the outside of a 90 degree angle. I've got some little 1x2 screwed to the ends as feet to hold it in a "V" shape, and lay a 4x4 on top. Corners come out a little rounded so do a test piece first.

[@savitaroopan9014]

thank you

[@jackchinproperty]

very good idea... this is what i looking for. thanks

[@christophervela5447]

Awesome content

[@dokterac6880]

Goooooooddd.....!!!!

[@lost70s]

thin wall drainage pipe NOT the schedule 20

[@PGSTARR]

I have been trying to accomplish this for several days now, and I must be doing something wrong. First I tried a piece of regular 4 inch PVC about 3 feet long with no success. The tube wall is so thick the heat had no effect. Next I tried 4 inch thin wall (drainage) tubing, first at 3 feet long and then at 1 foot long. Neither became the soft flexible sheet you pulled from your stove pipe, and neither flattened out like yours did. Both had ridges and humps in them and they started hardening almost immediately. Can you offer any advice? I'm desperate.

[@dheerajvashishtphysics6815]

Thanks

[@ILhamKambaa]

good ideo,,,

[@masoudahmad4348]

Based on the Pipe you used is about 3-4 inc pleas telmi how to flat a 1 inch pipe 100cm/1m long

[@SeattleRingHunter]

1. What schedule PVC pipe did you use? Or exactly how thick is the gauge of the pipe before heating?
How many total minutes did you heat the PVC to achieve that much pliability before melting occurs?

[@greenhornadventure]

The pipe was heated for around 4 minutes. It's most likely schedule 40 PVC pipe.

[@b.perkin5853]

@@greenhornadventure No, - it's wall is too thin to be sch 40, it looks more like DWV pipe which is about Sch 20, also it's about a 3 inch diameter, which is more evidence of it being DWV pipe.

[@fadhilz963]

Can a pvc pipe can weld

[@windrawijaya950]

Is this safe to your health? I heard pvc would release carcinogenic if heated

[@TrainsForever]

Everything has some kind off gas when it’s heated so try to use a mask if it bothers you. It’ll only be safer

[@handymanhoney-do6881]

Not highly toxic in small amounts with adequate ventilation. You wouldn’t want to do it in an enclosed room several hours a day. It’s probably more dangerous driving to the store to buy the pipe than occasionally heating a piece or two.

[@devickroop9904]

Genius grandpa

[@deshi7892]

What is the machine?

[@WindowCleanerBloke]

Which one do you mean?

[@deshi7892]

@@WindowCleanerBloke i indicated this machine that you used to melt the pvc

[@WindowCleanerBloke]

@@deshi7892 This is the heat gun we using. Hitachi RH650V digital heat gun