When I learned about the trays, you only need adhesive on the trays without the holes. The alginate automatically bonds to the holes in the impression tray.
Don't need vibration, simply wet the imp, flick out excess, plaster in teeth and base with same mix. Why use a different mix to base? Especially as yellow stone doesn't take well to yellow stone.
hi dental technician, nobody cares. This video helped me pass my exam, and that is what really matters. make your own video and link me if it matters too much to you, otherwise i'll just hire you when i graduate
i have bad news for every one of you fools, this video allowed me to pass my theoretical dental materials exam, yes donny onwards to be a dentist, dont worry i wont bother doing this in practice, i'll send it to a lab - they're always going to do a better job than a dentist 9 times out of 10
Liked your video! Do you practice in Las Vegas? I own a concierge dental lab in Henderson.If so, lets get together for networking. Looking for a great technician to operate our cam system in Vegas.Thanks
Use 70ml for cold water and 205 grams for dental stone powder in order to make two impressions (mandibular and maxillary). So, you can make two impressions :) Once you finish, let stone settle for 30 minutes. Doesn't have to be 45, it just depends obvs.
What? The music was pure gold. Just listen to the irony during the impression bit where he mixes the alginate. That is us! Nobody else is so unnecessarily precise for no good reason!
okay, I hope your instructor knocked off points for the MUSIC. Narration... subtitles... anything would've been better. The music ruined the video in my opinion.
"A willing patient" Excuse me! I'm not very willing to go through that hell again! "Make sure it doesn't run down their throat" *shows long drip of solidified goo hanging off the mold*
Music aside, i fancy this video so much. It's really informative and i understood how to take an Alginate Impression. Thank you :)
Music had me sitting on the edge of the dental chair
When I learned about the trays, you only need adhesive on the trays without the holes. The alginate automatically bonds to the holes in the impression tray.
Kim Hill right. I learned that as well
Depends. If you are using silicone it doesnt really matter what kind of tray is used
Very true. To many hols on the tray mechanical bonding no need for adhesive...
not really true, you need adhesive around the edges to prevent peeling away of the alginate and distortion of the model during pouring!
I about peed myself laughing over the willing patient music.
I love the Harry Potter music thank you
I find this one is very useful and easy technique in putting a base
Why need impression of r teeth if what patient wants are to make ones that arent there?0
@@artistaloca4 You have to know how the other teeth are, the anatomy of the teeth that will be in contact with the protesis and so on.
Very useful,as dental assistant..
I like the way that he did the trimming Cast
The work is really more than amazing 👍🏽🌸
This video was very helpful, thank you for sharing.
Very neat and clean work
Great video West Snyder 👍🏻 it was very interesting . I’m currently getting started privately . It helped me a lot . Hope your career blossoms .
very good, I liked how to put stone one to take it out of tray, definitely try thanks
Fantastic workmanship of dental procedure.Awesome job in demonstrating the efficient use of the tools.
A very useful video. Thank you for making this.
6:22 that sound made me laugh .. I don't know why :D
Hahahaha me too i'm dead😂😑
And 06:33
Don't need vibration, simply wet the imp, flick out excess, plaster in teeth and base with same mix. Why use a different mix to base? Especially as yellow stone doesn't take well to yellow stone.
Wow it is an amazing video that explain the impression and the cast 🌼
This was very helpful
Most dentists cant take a decent impression i work with terrible ones every single day
Informative video
love that we have background Harry Potter music
😂
Dentistry with fun tysm sir really hlpful
Amazing work
instead of the damn music, explaining would have been better!!!
I have to agree about the music.
Omg. Please no MUSIC!!!!!
Facts
the best trailer
Video was great. Make more.
Very beautiful and time consuming!!
Best video
İt was perfect sir
Today, I took an impression and it was watery and I didn’t have enough stone to create a base. However, the impressions came out decent.
Really loved video thankyou sooooo much for it sir..👍👍👍
Before taking an impression it is very important to select a tray
Without even telling regarding tray selection how can you take impression
i loved the video
was it a first time trial you did?
For sure not
He looked like has done more than 9 times
Wow, good job
Nice Harry Potter’s theme here!
Harry potter sound
I see where emma chamberlain and antonio garza got their song inspo from
nice job
Very nice
Harry Potter music....very good lol
Why don't you use base former moulds for making base. Yours cast base is too bulky , practically it would need a huge articulator to mount your model.
اللهم صل على محمد وال محمد كما صليت
على أبر اهيم وعلى ال ابراهيم
وبارك على محمد وعلى ال محمد كما باركت على ابراهيم وعلى ال ابراهيم انك حميد مجيد
Harry Potter, nice choice!
Thankyouuu so much helpinggg
What type of stone has been used to make the cast?
useful video thank you 😊👏👏👏👌
Very usefull thanks
Which stone has been used in it??
very well made
Thank you so much finally somebody tell the true about this video and poor technic! I am agree 100% with you!
hi dental technician, nobody cares. This video helped me pass my exam, and that is what really matters. make your own video and link me if it matters too much to you, otherwise i'll just hire you when i graduate
vacumecleaner I have already job, so please relax!
vacumecleaner I'm in agreement too, your technique is very poor. You lack dextrity and coordination I hope you're not training to be a dentist lol
i have bad news for every one of you fools, this video allowed me to pass my theoretical dental materials exam, yes donny onwards to be a dentist, dont worry i wont bother doing this in practice, i'll send it to a lab - they're always going to do a better job than a dentist 9 times out of 10
The casts are so bulky . Why don't you use base formers made of rubber. This will avoid the trimmings of excess.
How much less water for the base?
You don’t need adhesive on trays with holes
Liked your video! Do you practice in Las Vegas? I own a concierge dental lab in Henderson.If so, lets get together for networking. Looking for a great technician to operate our cam system in Vegas.Thanks
Instead of forcing maxillary tray downwards you have to force it to upward that was a wrong method to take out max tray
عمله حاجز لبني بعد خلع درسه هل ده صح ولاغلط
so first you wait for the model to set for 45 min to an hour and then you wait for the base to set anoher 45 min to an hour? waste of time
Set them together
Not at all
For cast 25 m
And base 15 m
Why don't you do another one whilr waiting
Use 70ml for cold water and 205 grams for dental stone powder in order to make two impressions (mandibular and maxillary). So, you can make two impressions :) Once you finish, let stone settle for 30 minutes. Doesn't have to be 45, it just depends obvs.
Dental impressions is so 2018 ..lol .. digital dental impressions is where its at .
Thanks
u dont trim the heels?
Song at 10:00 is legit😍 I'd love to cut a motorcycle vid and use this in the background
It's Lindsey sterling
MissCynthiaJanett I appreciate your response💪🏼💪🏼💪🏼Thank you very much
How long do you leave the alginate impression in the mouth?
About 2 mins
Ölçüyü alırken aljinat donacak diye gerildim
why you don't use a mold
A bit of waste of time the way it was done, but it reached the same goal, so its not a problem.
Thank you for your great video
The music was so unnecessary.
Meyvi Mell can’t agree more
What? The music was pure gold. Just listen to the irony during the impression bit where he mixes the alginate. That is us! Nobody else is so unnecessarily precise for no good reason!
nice jobs
Why didn’t you just pour the impressions and base them in one pour? That’s how we doo it. Are you scared?
Nice....
nice
Music😘😘👌👌👌
where's your lathe
Thnkz u gaal
okay, I hope your instructor knocked off points for the MUSIC. Narration... subtitles... anything would've been better. The music ruined the video in my opinion.
Super
your number 9 is chipped what a waste of effort lol
No disinfection !!!
So much yellow stone
12:13 song? So cool
خيالي 😭😭😭😭مشالله
Да уж, супер гипс не жалеете. Не было бы тримера, то такую порнографию в виде цоколя не делали)
Perfect ✌
Im a dental technician
Fara Harshu can I ask u a couple questions about equip?
Ughhh the music was kinda disturbing..... i wish u explained
Sir i need a job there
"A willing patient"
Excuse me! I'm not very willing to go through that hell again!
"Make sure it doesn't run down their throat" *shows long drip of solidified goo hanging off the mold*
It's hard to do impresión have put more video
too troll on the music
It sucks trying to read while watching what's going on in the video. A voice-over for instructions would be more beneficial.
Can u help me just il Noob for this
This is a horrible example from mix to load and placing in mouth !
Creepy ass music 😑
Poor mixing of alginate, bad pouring, you can atleast move the impression up and down so there will be no bubbles
Hello Peter, how are you doing?
What is your e-mail?
What an ugly pair of models XD It's amazing how many people hate the music. I think it fits perfectly
That stupid loud music ruined it , ill go find a professional video
欧美专家厉害
West of material
🙏🏻👍🏻
less music more talking - cannot read and watch at same time!!
I rather not listen to music - trying to learn . But all in all great video !!!!!😀
you have no idea how to manipulate your materials