I'm not sure that many people realize the work and skill it takes to do what this guy did right here by getting the tree to the ground without ruining it or his saw, or himself. It's a good feeling once you get em down. Great work.
man that's hard work. I cut two 6ft willows a few weeks ago with a Stihl 391 24" bar. I was frigging toast and soaking wet at the end of the day. Could barely move for two days... Hat's off to CT3 for that one, never done one that big and I don't think I ever will lol. Have a huge 400y/o beech tree about that size on the property, but not ever going to get that one down, will wait until it comes down naturally...
Good stuff man! I'm getting a 572 for my next saw. I cut a huge water oak this summer in a guys yard with a barn and a dog pen near it, lol. There wasn't much flares on it, thank god, and I was just able to get through it with my 570 Husky and a 28" bar coming from each side. Climbed it and put a cable in it to pull it, shook the ground when it hit.
Tree fact for all the people that don't know the truth about tree's. Healthy, forest grown tree's, especially hardwoods, grow really fast. Oldest hardwood tree I ever cut was a white oak that was 9'8" on the stump and was only 146 years old. Cut a 54" Blue Ash today that was 85. Tree's are just like anything else that lives and breaths, it's only going to be around so long and that's it. Sure, those tree's might of lasted another 30-50 years, but they were already in decline. If the tree is cut in it's prime, far less goes to waste, and potentially the products made from tree's like this might be around for thousands of years, which to me is a far greater story to tell than rotting back to the ground.
I love my 572xp. I had mine a week after you uploaded your first video on it. No problems I run a 28 Tsumara on it, and the stock 20 I bought it with. My back ups are the shindaiwa 600sx, and a stihl 441c.
Tim, When they were putting housing projects in the Beaverton, Oregon area around 15 years ago, I was given several white oak trees that were in the 6 and 7 foot diameter range at the stump. Surprisingly, they were unable to locate anyone interested in purchasing the logs in our area. They were glad I was interested in removing the logs bucked into 12 to 16 foot lengths. We loaded them using some 7/8 inch diameter chokers that had been left on our farm by people that logged our property of Douglas Fir and Cedar in the 1930's. By the way, the stumps left on our place using spring boards to get above the swell buts were cut between 8 and 12 foot high. Most of the stumps of the trees fallen in the 1930's were from 4 to 8 or more feet in diameter at 8 or 12 feet above the ground. Getting back to the oak, we utilized two large track hoes and the chokers to load the logs onto my trailer. I milled the logs using our Lucas swing blade sawmill. The Lucas mill works great milling very large logs. The white oak in our area doesn't have large swell buts like the trees you took down. There was not a lot of taper, 6 to 12 inches on a 16 foot log. The trees were that way down to about 2 feet above the ground. For your information I used my Jonsered 910 with a 48 inch bar to buck the logs to length. You did a bang up job getting those big trees down. If you come across any more, I would like to see you try spring boards to get above the swell buts when doing the falling. That should be very entertaining!
That sure is intimidating to cut a tree that big , getting some butter flies in the stomach,the feeling like walking in the ring getting ready to fight a prime Mike Tyson... great video GREAT JOB..💪💪🪓. I got a 572 XP and I love it..
Amazed that 576 or 572 pulled that 36" that well. Impressed. Nice job. As much as it hurts to see such a large tree gone and off to the mill but it's better than waiting to late and watching it rot out. Great video and explanation. After watching not sure I'm so loyal to Stihl. I dont see a 460 doing that. Stay safe
Did a lot of milling with my 372 for years using a 32 inch bar and a rio chain. It ran really good, even cut red oak love as wide as the mill would allow. Have a 572 coming in a couple days and can't wait to see how it pulls.
Tim that brought back good memories back in the day. saw the heart out of it not Splinter pulling it. If that log 16 foot long 47 inches at the little end it would have 1936 board feet Dole scale we used to run 2100 Husqvarna with a Oregon hard wood chipper chain good video.
Wow what a crash and what a tree. Awesome job man I couldn’t imagine the rush you felt as it went down. I’ve run saw a good bit in my life and I can say a tree like that will keep ya in shape. It’s a lot of work running a saw like that. Sweet
Wow. Incredible. I enjoyed seeing this video. I think that tree has a life span and a purpose just like we do in this world. Maybe I'm wrong. Glad it wasn't a giant redwood though. I hope to get to see those trees one day.
Retired now and still missing doing 2 of these big stems a day here in Northern BC Canada. Wonderful days outside making good money. Ahh, those were the days my friend.
Larry Hottle as long as it doesn’t get center rot, and there are no houses nearby,have at it! But when Hurricane Isabel hit Virginia in2003, we had just taken down 14 large pine and oak, out of the 35 that were there,on a one acre lot! We still lost two more, and two of our neighbors trees ended up in our yard, but no houses were hit. Several neighbors had houses completely cut in half! The area was Petersburg’s first subdivision, built in1946. Most of the trees were young, when the Civil war was going on around them.
As a logger some of you don’t realize the landowners want it cut for $$$ it’s not always up to the logger. Some don’t however also. I’ve cut tracks on River bottoms that literally broke my heart to do. But it’s all part of the business. If it was mine personally it would get left.
As a Botanist the tree looks as it has withstand drought and heavy rains followed by years of wash off by the exposed root base. True survivor until it was commissioned to fall. Not the sawyers fault. But the land owners. I ama sawyer as well and we do what we have to do to keep the lights on.
I must admit, I was wrong. I had serious doubts about the 572xp handling the 36" bar. I can admit when I am wrong. I had thought to myself that the 572 would be a good saw for pine and poplar but not necessarily enough saw for hardwood of any size, I was wrong. I think I am going to buy one and run a 24" bar and chain on it and I will be plenty happy with that. Thanks for the video Tim, I've been waiting for something like this. I understand your affiliation with Husqvarna but I believe you still capable of giving a fair and honest opinion of the equipment you run.
Big is actually a breeze until it gets real big aka more than double bar length. When the saw is dogged you're not doing much. (15 years of pro falling)
Да, здоровый дуб!!! Хорошая пила, хорошая работа! Я не вальщик и не так много пилю, но люблю пилить, и одна из моих цепных пил достаточно мощная и годится для такой работы, это Makita DCS 7900. Пилил ей один раз сухой дуб который в диаметре был немного поменьше но всё равно здоровый для наших мест.
Nice job, its VERY noticeable just how fuel efficient strato cylinder designed saws are to the old traditional 2T designs. U just get so much more work dine per tank.
I think Chad did an excellent job of cutting the tree down he was safe about doing it and watching everything that he was doing being very careful that's a good thing to do
Nice felling. I have run the xcut chains on my 550xp mk2 and am really impressed with the cutting ability of a semi-chisel. Have been wanting to try the full chisel xcut for my 572. I'm no pro tree guy, but I find full house chains are better for the 572 when felling. For some reason, the skip tooth chains seem to bind when making the face cut where I don't have that same issue with full house chains; maybe it's where the peak torque/rpm is?
Someone must have brought a wheelbarrow down to that tree for you to get back to your truck eh ?... Skeeery buckin' right there , big pucker factor for me . lol
Great job. Would bee nice to follow this tree to the end of processing. Loading, hauling to mill, then sawing at the mill. Also, as asked below by others, how old is this tree. Could you count the rings? Must be over 400 years. Then the value of the logs and lumber. Thanks. That sound hitting the ground was something else.
cotontop3 They are called buttress roots. Castles and other large stone buildings have buttresses and flying buttresses to help keep the walls from falling over.
Would have been cool to use my old 76 Mcculloch Super Pro 125C with a 42 inch bar/ chain semi skip chisel chain on that big ol oak👍😜😁 That Husky needs a new chain
Hello Tim wow what a beauty that,s when you wish you had your own mill, the stuff you can build with that tree wow is all i can must have been a fun job 5 stars way to go. Your friend Bigredscotsman!
Huge timber. Any idea what each log will weigh and the board feet in them? Did anyone think to count the rings? Think about the history of time they have seen. Be safe and God bless.
I'm a sthil man thru and thru ,,,,but I think that tree was so old and hard that it would have been a struggle for any brand saw or chain .that was just plain and some true hard wood brother ...great job though
I turn the oiler wide open on all my saws when I get them. Husky’s are designed even with oiler wide open they will still run out of gas before the oil does. It does good with the 36 on it.
Measure at breast height. I've seen a Northern Red Oak in a nature preserve and I swear if it was cut down, you could set up a tent on its stump and they grow more slowly up in New York state. The tree in this video must have been exceptionally tall because the aerial footage was so impressive comparing the height versus trunk.
Holy Shit that is a lot of tree and a nice job dropping it Tim. My personal best was a just over 3' white pine up here in New England and that had nothing on this baby LOL. Great vid as always Tim while I don't comment often I don't miss any of your vids Thanks for all your quality vids
Excellent video Tim. I've been looking forward to this since you talked about it last week. The 572xp handled the 36" bar easily. Thanks for all you do. Have a great week.
I got some good friends that live over at Eutaw AL. Ricky and Brenda Wilson. BTW why wouldn't folks not watch the whole video? I hope to see y'all tomorrow.
What did yall sell that for Regular lumber or veneer log ? Most of the saw mills in my area of virginia wouldnt be able to saw it . It would have to be sold as veneer log ..
That's good to know, I am debating a 572 with a 30 inch bar, since husky are not making anything bigger atm. And want something lighter than 3120 that I have. Have a 372 but it would struggle with a 30 inch bar
I'm not sure that many people realize the work and skill it takes to do what this guy did right here by getting the tree to the ground without ruining it or his saw, or himself. It's a good feeling once you get em down. Great work.
Man, good job!!! The 572xp did a great job!!
Seriously impressed by that 572 running a 36" bar without skip chain. As you said not the same torque as the 395 but got the job done without crying!
Full comp chain
I love cutting, sawing and milling but I would have given that ol grandaddy oak a pass. It'll take 1000 years to replace it. Mixed feelings here.
The bigger the better
Yes sir Nathan that was a old tree. I would have let her live
bet that weren't more than 250 yrs !
Regardless... I would have passed it by.
Takes a lot of time to get one that big
Wow, what a good job you did on that massive tree! The 572 made it look a whole lot easier than it no doubt was. This was worth the wait.
That’s a awesome tree. Great job on taking it down. Not many people can cut a tree like that lots of preparation to cut one like that. Great video
man that's hard work. I cut two 6ft willows a few weeks ago with a Stihl 391 24" bar. I was frigging toast and soaking wet at the end of the day. Could barely move for two days... Hat's off to CT3 for that one, never done one that big and I don't think I ever will lol. Have a huge 400y/o beech tree about that size on the property, but not ever going to get that one down, will wait until it comes down naturally...
Hella of cut. Nice work. And thanks for being smart enough to wear and use safety equipment. You set a good example.
Good stuff man! I'm getting a 572 for my next saw. I cut a huge water oak this summer in a guys yard with a barn and a dog pen near it, lol. There wasn't much flares on it, thank god, and I was just able to get through it with my 570 Husky and a 28" bar coming from each side. Climbed it and put a cable in it to pull it, shook the ground when it hit.
Tree fact for all the people that don't know the truth about tree's. Healthy, forest grown tree's, especially hardwoods, grow really fast. Oldest hardwood tree I ever cut was a white oak that was 9'8" on the stump and was only 146 years old. Cut a 54" Blue Ash today that was 85. Tree's are just like anything else that lives and breaths, it's only going to be around so long and that's it. Sure, those tree's might of lasted another 30-50 years, but they were already in decline. If the tree is cut in it's prime, far less goes to waste, and potentially the products made from tree's like this might be around for thousands of years, which to me is a far greater story to tell than rotting back to the ground.
Exactly thank you
Also, rot=CO2
"Only" 146 years. Lol. There's far too little old growth in the United States and it's a shame to see a tree like this cut.
only 146 dam that's like over night
@@anymanusa I live where almost every tree around is 1000+ years old. avenue of the Giants. This tree isn't that rare
My dad, rip he would have really enjoyed this video- he cut logs in Ms in the 70s-80s with P52 Pioneer Chainsaws-heavy saws Old school logger
That's so cool, I bet they cut like a boss, those men where 10 times tougher in those days ..😎
I love my 572xp. I had mine a week after you uploaded your first video on it. No problems I run a 28 Tsumara on it, and the stock 20 I bought it with. My back ups are the shindaiwa 600sx, and a stihl 441c.
Μετάφραση σχολίου
Tim, When they were putting housing projects in the Beaverton, Oregon area around 15 years ago, I was given several white oak trees that were in the 6 and 7 foot diameter range at the stump. Surprisingly, they were unable to locate anyone interested in purchasing the logs in our area. They were glad I was interested in removing the logs bucked into 12 to 16 foot lengths. We loaded them using some 7/8 inch diameter chokers that had been left on our farm by people that logged our property of Douglas Fir and Cedar in the 1930's. By the way, the stumps left on our place using spring boards to get above the swell buts were cut between 8 and 12 foot high. Most of the stumps of the trees fallen in the 1930's were from 4 to 8 or more feet in diameter at 8 or 12 feet above the ground. Getting back to the oak, we utilized two large track hoes and the chokers to load the logs onto my trailer. I milled the logs using our Lucas swing blade sawmill. The Lucas mill works great milling very large logs. The white oak in our area doesn't have large swell buts like the trees you took down. There was not a lot of taper, 6 to 12 inches on a 16 foot log. The trees were that way down to about 2 feet above the ground. For your information I used my Jonsered 910 with a 48 inch bar to buck the logs to length. You did a bang up job getting those big trees down. If you come across any more, I would like to see you try spring boards to get above the swell buts when doing the falling. That should be very entertaining!
That sure is intimidating to cut a tree that big , getting some butter flies in the stomach,the feeling like walking in the ring getting ready to fight a prime Mike Tyson... great video GREAT JOB..💪💪🪓. I got a 572 XP and I love it..
Amazed that 576 or 572 pulled that 36" that well. Impressed. Nice job. As much as it hurts to see such a large tree gone and off to the mill but it's better than waiting to late and watching it rot out. Great video and explanation. After watching not sure I'm so loyal to Stihl. I dont see a 460 doing that. Stay safe
Impressive cut .. this is a real man cut ... Like cutting down the Eiffel Tower, massive !!!!
Did a lot of milling with my 372 for years using a 32 inch bar and a rio chain. It ran really good, even cut red oak love as wide as the mill would allow. Have a 572 coming in a couple days and can't wait to see how it pulls.
You could get a few table tops out of that beast… another incredible video Sir. The sound it made as it hit the ground…Wow.
Unbelievable! I bet you could carve a Holiday Turkey to a Masterpiece! Enjoying watching this video!👍
That looks like the trees here in northern California. We get oaks around 12' , redwoods around 25'. That was awesome I have fell a few....lol
I am getting one of these saws this week, I'm pretty excited.
Tim that brought back good memories back in the day. saw the heart out of it not Splinter pulling it. If that log 16 foot long 47 inches at the little end it would have 1936 board feet Dole scale we used to run 2100 Husqvarna with a Oregon hard wood chipper chain good video.
You did a great Job felling this great tree, I like all of your videos, keep them comeing
Wow what a crash and what a tree. Awesome job man I couldn’t imagine the rush you felt as it went down. I’ve run saw a good bit in my life and I can say a tree like that will keep ya in shape. It’s a lot of work running a saw like that. Sweet
I felt like I was watching Avatar. Wow, though, I would've like to have that log to mill, I hate to say. I love the smell of freshly cut oak.
Wow. Incredible. I enjoyed seeing this video. I think that tree has a life span and a purpose just like we do in this world. Maybe I'm wrong. Glad it wasn't a giant redwood though. I hope to get to see those trees one day.
Sequoia is more impressive, they are wider at the bottom. I have a redwood in my yard in Mississippi!
What an impressive tree! Sad to see it go. But a beautiful job felling it mate! I can appreciate how hard of a job that was to drop!
That 572 did an amazing job with that long of bar in a big ole oak
Impressed I definitely have to get me one of those lol
I have 572xp but no that length of bar, only 20". For that size almost a hotrod.
Retired now and still missing doing 2 of these big stems a day here in Northern BC Canada. Wonderful days outside making good money. Ahh, those were the days my friend.
Tim, makes you pucker! I am 63 and it still makes me nervous, I have one Huge Oak like that one, And fully intend to leave it stand!
Larry Hottle as long as it doesn’t get center rot, and there are no houses nearby,have at it! But when Hurricane Isabel hit Virginia in2003, we had just taken down 14 large pine and oak, out of the 35 that were there,on a one acre lot! We still lost two more, and two of our neighbors trees ended up in our yard, but no houses were hit. Several neighbors had houses completely cut in half! The area was Petersburg’s first subdivision, built in1946. Most of the trees were young, when the Civil war was going on around them.
As a logger some of you don’t realize the landowners want it cut for $$$ it’s not always up to the logger. Some don’t however also. I’ve cut tracks on River bottoms that literally broke my heart to do. But it’s all part of the business. If it was mine personally it would get left.
You do very good work.would like to come south and work with you sometime.Been doing it for 40 years now retired like your videos
Husqvarna is doing well. I had a Husqvarna dirt bike in my youth.
Thank you Tim
All that safety gear.. letsdig would have been out there in his flip flops just saying lol
Lmao
The joys of sponsorship. They get to send you anything and you have to wear it.
Clothes are just tools. It's not a fashion show, just friggin' equipment. Who cares lol.
@letsdig18 you and your flip flops Chris 😂
In Mississippi steel toes come standard… flip flops are for vacations and going out…
As a Botanist the tree looks as it has withstand drought and heavy rains followed by years of wash off by the exposed root base. True survivor until it was commissioned to fall. Not the sawyers fault. But the land owners. I ama sawyer as well and we do what we have to do to keep the lights on.
good work on a big job
I ain't a tree hugger but damn sad to see such a big ass oak tree cut down.
I must admit, I was wrong. I had serious doubts about the 572xp handling the 36" bar. I can admit when I am wrong. I had thought to myself that the 572 would be a good saw for pine and poplar but not necessarily enough saw for hardwood of any size, I was wrong. I think I am going to buy one and run a 24" bar and chain on it and I will be plenty happy with that. Thanks for the video Tim, I've been waiting for something like this. I understand your affiliation with Husqvarna but I believe you still capable of giving a fair and honest opinion of the equipment you run.
Kinda mixed feelings seeing that beast come down. 😥 Hopefully they'll make something nice out of it.
Toothpicks hopefully
@@eviljohnson23 nothing like oak toothpicks😀
wow that was a monster tree great video Tim thanks. like to see what its worth and weighs or what not once the mill get it.
Good job! Cutting those big trees is like pouring concrete, it's a lot of work and once you start you can't stop till its finished.
Big is actually a breeze until it gets real big aka more than double bar length.
When the saw is dogged you're not doing much.
(15 years of pro falling)
Wow what a cut you sure made it look easy!
One big gorgeous tree a shame to see it go. Looks healthy.
Move on if you don’t like it
Better to take it down when its healty then when it's dead and rotting away
Да, здоровый дуб!!! Хорошая пила, хорошая работа! Я не вальщик и не так много пилю, но люблю пилить, и одна из моих цепных пил достаточно мощная и годится для такой работы, это Makita DCS 7900. Пилил ей один раз сухой дуб который в диаметре был немного поменьше но всё равно здоровый для наших мест.
Awesome tree! Thanks for sharing the cut!
Nice job, its VERY noticeable just how fuel efficient strato cylinder designed saws are to the old traditional 2T designs. U just get so much more work dine per tank.
I think Chad did an excellent job of cutting the tree down he was safe about doing it and watching everything that he was doing being very careful that's a good thing to do
That was a Beast for Sure !! Nice cutting Tim.....Great video....
wow ,! now that a big ass tree buddy nice work !!!!
I'm surprised it wasn't rotten inside. I have seen a lot younger trees that were completely cancered out.
Extremely amazing felling, WOW..! Brilliant work..
Is this actually good technique?
Nice felling. I have run the xcut chains on my 550xp mk2 and am really impressed with the cutting ability of a semi-chisel. Have been wanting to try the full chisel xcut for my 572. I'm no pro tree guy, but I find full house chains are better for the 572 when felling. For some reason, the skip tooth chains seem to bind when making the face cut where I don't have that same issue with full house chains; maybe it's where the peak torque/rpm is?
How many board feet do you think is in the mill part of the tree?
All that poison ivy making me itch just watching! Amazing drop nice work!
Very nice job Tim
Just think, years ago, folks cut that down with an ax. This was later followed by the cross-cut saw.
I would like to know what it scales out on board feet!!
An epic fuck ton!
Definitely impressive for a 70cc saw Cottontop .
How many times did you have to sharpen the blade?
When the winglets you trim off are as big around as the trees you normally log you know you have a monster on your hands.
Great video 👍 👍
great video Tim, man that was one massive tree and some great sawing man good job be safe and have a blessed day !
Someone must have brought a wheelbarrow down to that tree for you to get back to your truck eh ?... Skeeery buckin' right there , big pucker factor for me . lol
Awesome video Tim that is a big tree the biggest tree I have every seen was 48 of cross
Me and his daddy Brian are life long friends and graduated P.A. together Nice young man.
That’s pretty cool
I see that's Brian"s new skidder lol
Good Job, cotontop !!!!
Great job. Would bee nice to follow this tree to the end of processing. Loading, hauling to mill, then sawing at the mill. Also, as asked below by others, how old is this tree. Could you count the rings? Must be over 400 years. Then the value of the logs and lumber. Thanks. That sound hitting the ground was something else.
Dennis Carter
Great video today Tim
I went into firefights with less gear than that back on my 05 tour. Lol congrats on takin' down that biggin safely
cotontop3 They are called buttress roots. Castles and other large stone buildings have buttresses and flying buttresses to help keep the walls from falling over.
Nice. Video thanks 😊
Would have been cool to use my old 76 Mcculloch Super Pro 125C with a 42 inch bar/ chain semi skip chisel chain on that big ol oak👍😜😁
That Husky needs a new chain
Reminds me of ol girl I was cutting back n da dayz
Hello Tim wow what a beauty that,s when you wish you had your own mill, the stuff you can build with that tree wow is all i can must have been a fun job 5 stars way to go. Your friend Bigredscotsman!
What a tree and I Killed it! Well done You!
Huge timber. Any idea what each log will weigh and the board feet in them? Did anyone think to count the rings? Think about the history of time they have seen. Be safe and God bless.
That was a huge tree. Nothing in comparison to the old growth redwoods in California and Oregon but, still a large tree and tough work.
Tree toes LOL!
Thanks for the video I'm looking at a 372. Your info was appreciated and helpful. Ed White Callahan, Fl.
Hey Ed I lived in Callahan when I was a kid.was surprised to see Callahan. 2437 lem turner.
Good video have a good week and stay safe 👍
Is it that bar making the saw bog a bit more than it usually does?
Just finished watching the rest of the video, thanks for explaining
I'm a sthil man thru and thru ,,,,but I think that tree was so old and hard that it would have been a struggle for any brand saw or chain .that was just plain and some true hard wood brother ...great job though
How does the oiler do with that size bar. I run 28s and the oiler does just fine. I was thinking about 32s. Just curious.
I turn the oiler wide open on all my saws when I get them. Husky’s are designed even with oiler wide open they will still run out of gas before the oil does. It does good with the 36 on it.
@@cotontop3 that's cool. Thanks much. I'll be giving that a go I think
I love cutting but it would be hard for me to cut such a magnificent tree down. If it was an option I would have let those stand.
Sadly once they're alone in a clearing, they don't stand a chance in a bad storm.
The only way to see them grow older is to leave the area alone.
Measure at breast height.
I've seen a Northern Red Oak in a nature preserve and I swear if it was cut down, you could set up a tent on its stump and they grow more slowly up in New York state.
The tree in this video must have been exceptionally tall because the aerial footage was so impressive comparing the height versus trunk.
It would be interesting to see "Letsdig18" dig up the stump.
Hold my beer 🍺?.
What's the difference between a 572 and a 372? Just model year?
Those KBL's are fun to operate
id like to see them moving it and then at the mill.what a tree
ুঙণ্ডঞঞঞ্জ
If they cant't take a log to the mill take the mill to the log.
Holy Shit that is a lot of tree and a nice job dropping it Tim. My personal best was a just over 3' white pine up here in New England and that had nothing on this baby LOL. Great vid as always Tim while I don't comment often I don't miss any of your vids Thanks for all your quality vids
beautiful tree! Its a shame red oak is at its lowest price in 35yrs. good job cutting it i can tell u no how its done ,have a good day
The job is a bit too big for the saw. In Australian hardwood it would be a 3120 or a 880
Right should've brought a bigger saw 90+cc
661c would’ve been enough no need to swing one of those heavy bricks around all day if ya don’t have to
Excellent video Tim. I've been looking forward to this since you talked about it last week. The 572xp handled the 36" bar easily. Thanks for all you do. Have a great week.
I got some good friends that live over at Eutaw AL. Ricky and Brenda Wilson. BTW why wouldn't folks not watch the whole video? I hope to see y'all tomorrow.
Looking forward to meeting you Byron.
I own a 372xp and a 550xp auto tune. With all the time that 572xp was in that tree the auto tune I bet got that saw. Completely dialed in.
Do you log on private land or state and federal forest or all of the above?
Bel video saluti dalla Svizzera
What did yall sell that for Regular lumber or veneer log ? Most of the saw mills in my area of virginia wouldnt be able to saw it . It would have to be sold as veneer log ..
What chain are you using? Full or skip link?
I was running the Husqvarna x-cut non skip and surprisingly the saw pulled it pretty good.
That's good to know, I am debating a 572 with a 30 inch bar, since husky are not making anything bigger atm. And want something lighter than 3120 that I have.
Have a 372 but it would struggle with a 30 inch bar