Quality pal hope u well. My favourite kzp I treat it like mono me pal I Barr next day. Then little tickle with scratcher or plain. It's open texture doing this way. Only downside this way is u use alot more primer.. But slow setter awesome I love it
@@Rendervate Thats nice I'm finding im spraying in the morning and it still fresh in the evening but a little to much for the day after Think I might start a little wetter and see how I get on Nathan
What did you say at the start mate? Couldn’t understand your northern tone lol!! Nice spraying though lad ! I’ve got an m200 which you started with and I’ve paid it off last month so gonna go K4👊
it depends what we are going over pal, on a re-render the beads never sit flush so its 10mm knowing its probably of around 15mm in most places sometimes more. on a new project 15mm beads becasue they go tighter if the brickies good haha, but 10mm is ok for thincoat too.
heu man no problem. the rotar is a standard one that is used most commonly on these machines its a d - 6-3 (orange) and the water setting changes from material to machines we use, but i go for as wet as i can with out it falling of the wall. this water is at 750 on our flow tube. hope that helps
I’ve started putting stops up against the frame Joel and won’t look back! So much easier for the reveals! Might be worth a try mate! A few quid extra pr house but makes em piece of piss!👊
ive got something for you brother! stop beads are class idea on reveals... but there is a bead i have been using and its got a rubber seal that finishes upto the frame! brother its a game changer! check them out here www.rendit.co.uk/renderplas-6mm-frameseal-apu-bead-26m
@@Rendervate was only a matter of time before something like this come out tbf ! I’ve always hated reveals and Now everyone and their mother seems to have their windows sprayed instead of replacing it’s kinda necessary as I’ve scratched a few by pulling the corner of my trowel or scratcher up em🙈😩 . I’m tight as fuck so I’ll stick to a 10mm instead! Lol👊
I used frameseal beads for years but the recently having issues with them separating from render have moved back to stop beads still use frameseals with the mesh attached but not without
@@steved6472 how do you put 10mm stop beads on the reveals as there's generally only a nib on existing work. Do you cut the bead down??? Only asking as I dread detaping or scratching windows etc...
hello mate, i have done in the past yeah its good gear, you need a flat plate from refina here is the link mate www.refina.co.uk/hand-tools/scratch-floats-scrapers-rasps/11-lattice-plane.html
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
Would be nice to see the next stage of flattening the render 👍👌⭐️⭐️⭐️⭐️⭐️
Awesome job joel, knocks the spots off hand balling it... 👍
Give us some vids of you ruling off mate and spatting please if you can. Great videos by the way, learning a lot from watching.
Random question but do you get much splash back onto the scaffold? Can imagine the scaffs throwing a wobbly if so
Quality pal hope u well.
My favourite kzp I treat it like mono me pal I Barr next day. Then little tickle with scratcher or plain.
It's open texture doing this way.
Only downside this way is u use alot more primer..
But slow setter awesome I love it
Boy has his gun and ain’t messing 🤣🤣
Hi mate
Just a quick question
How long after flattening this gable were you able to bar it and finish
Nathan
this was next morning mate, and it was still soft and wet. we could of power floated it back up!
@@Rendervate
Thats nice I'm finding im spraying in the morning and it still fresh in the evening but a little to much for the day after
Think I might start a little wetter and see how I get on
Nathan
Great way to go,what was the scratch over block or insulation 👍
Not just quicker but not has hard graft lol
gotta get me a machine, looks quality
Joel can/do you use this machine with finishing plaster indoors? Instead of skimming..
hey man no this can't be used for skimming but it can for the hardwall backing mate.
What did you say at the start mate? Couldn’t understand your northern tone lol!! Nice spraying though lad ! I’ve got an m200 which you started with and I’ve paid it off last month so gonna go K4👊
let me have a look pal hahah k4 is great, the m200 is anice machine too mate, with the thincoat setup.
ما هذهي المادة المستعملة وكيف يتم خلطها
Great vid what thickness beads do you normally use 10mm or 15mm for you thin coat
it depends what we are going over pal, on a re-render the beads never sit flush so its 10mm knowing its probably of around 15mm in most places sometimes more. on a new project 15mm beads becasue they go tighter if the brickies good haha, but 10mm is ok for thincoat too.
Hope you don't mind me asking what stator and rotor are you running and whats your water set too?
Nathan
heu man no problem. the rotar is a standard one that is used most commonly on these machines its a d - 6-3 (orange) and the water setting changes from material to machines we use, but i go for as wet as i can with out it falling of the wall. this water is at 750 on our flow tube. hope that helps
Thats great really appreciate the time and advice
Nathan
إنني أجيد هدا العمل جيدا وأعمل عدد كبير من الديكورات وإنني فنان في هدا العمل هل من خدمة معكم إنني محتاج عمل
I’ve started putting stops up against the frame Joel and won’t look back! So much easier for the reveals! Might be worth a try mate! A few quid extra pr house but makes em piece of piss!👊
ive got something for you brother!
stop beads are class idea on reveals... but there is a bead i have been using and its got a rubber seal that finishes upto the frame! brother its a game changer! check them out here www.rendit.co.uk/renderplas-6mm-frameseal-apu-bead-26m
@@Rendervate was only a matter of time before something like this come out tbf ! I’ve always hated reveals and Now everyone and their mother seems to have their windows sprayed instead of replacing it’s kinda necessary as I’ve scratched a few by pulling the corner of my trowel or scratcher up em🙈😩 . I’m tight as fuck so I’ll stick to a 10mm instead! Lol👊
I used frameseal beads for years but the recently having issues with them separating from render have moved back to stop beads still use frameseals with the mesh attached but not without
@@steved6472 how do you put 10mm stop beads on the reveals as there's generally only a nib on existing work. Do you cut the bead down??? Only asking as I dread detaping or scratching windows etc...
@@blakeevans2963 yes Blake! You can rip the wing down with snips !! I even if only the spine is left it still works
Hello fella do u do much webber and how do u scratch back in the corners 🤔
hello mate, i have done in the past yeah its good gear, you need a flat plate from refina here is the link mate
www.refina.co.uk/hand-tools/scratch-floats-scrapers-rasps/11-lattice-plane.html
@@Rendervate nice one thanks bud for getting back to me fella top man 👍
I’d of liked to see u rule that and finish it
you want a rule up video pal???
With no safety glasses, you’re asking for a trip to the hospital
There used to be a lot of proper plasterers who would have stood watching this and the said "get out of the way its far too slow".
All Knackered and stupid
The most used machine in Germany
إنني أجيد هدا العمل جيدا وأعمل عدد كبير من الديكورات وإنني فنان في هدا العمل هل من خدمة معكم إنني محتاج عمل