Just wanted to express my appreciation of your efforts to describe what it takes to undertake such a complicated task. Very few people do this without a charge. To make it even more useful, I would suggest to include a list of components together with their approximate costs. Thanks again!
DatBossAM :D how bad is it? you might be surprised that its not a problem. as long as its ok when corrected you should be fine in a civilian job. military will be a problem. fighter pilots i know have to have perfect uncorrected vision.
Super geiles cockpit! :) Baut ihr auch für andere leute solche cockpits? Weil ich bin nicht gerade der begabteste in sachen handwerk... Und wie sieht es aus mit den kosten, falls ihr das preisgeben wollt... Weiter so!! Werde gleich noch andere videos anschauen und auch mal den blog abchecken!
Hallo. Danke für deinen Kommentar. An diesem Cockpit haben wir nun über 3 jahre am bauen... Mehere Hundert, wenn nicht tausende Stunden Arbeit. Es gibt keine wirkliche Anleitung dazu. Im nachhinein müssten wir es uns zweimal überlegen ob wir wieder eins bauen würden. Zu den Kosten... Ich schätze mal so um die 15`000Euro für Material. Grüsse aus der schweiz. Nils
Hallo. Ja eins nach dem anderem. Rundumsicht (160°) folgt im September... LCDs als Sichtfenster eignen sich nicht wirklich, da die Tiefenwirkung verschwindet.
Hey I have liked and subbed love this vid! could u give me a link to where you purchased: 0:46 ??? and the landing gear lever? cheers. Can anyone reply If you know where I can purchase them Thanks
Hi, it is wonderful, your skill is remarkable, I would like to seek your guidance in building a similar one for myself, Starting with where to get the panels dimensional drawings.
Hi, it took 5 years to build this. Thousands of hours work... And its a complex system which you have to understand what is working together. Greets Nils
Tiefenwirkung hat man doch beim Beamer auch nicht sondern erst bei 3D , oder wie meinst du das? War halt mal bei so einem proffesionelleren 737 Simulator und das (auch unscharfe) Beamer Fliegengitterbild fand ich schon extrem nervig deswegen dachte ich HD Tvs machen das realistischer
its gonna cost you much more for you to get the parts and all but if your gonna build a homemade cockpit.just go and ask aound in forums and such if anyone has a yoke for sale
This a question for everyone! Without any rude replies, how easy is the wiring and do you think that an electricians degree at University may be of use?
Fred: hey bob you want me to take my ultra compact B737 round Bob: yeah sure it should fit in my room right? Fred: of course! on a less sarcastic note WELL DONE
Hi Miguel. Yes its FSX. Now we use "Prepar3d" instead. Looks way betterYes every switch and displays are working. In our blog: b737home.blogspot.ch/ you can see how we build it. Use the translator if you need to. And its the default FSX B737-800 plane from FSX. Greets from Switzerland Nils
ryaan beg . Hi, well is some sort of "isolation pad". You can find it in stores like "Home Depot". You put this things on the outside of a building to make it more energy efficiant.
nils169 Bonjour Nils., à ce jour votre cockpit doit être totalement fini ! Quelle chance !!! Moi , j'ai la même passion que vous et je construis également un cockpit en taille réelle d'un A320. J'utilise le même appareil que vous , le "Saitek pz45 throttle quadrant" . Vous , vous en avez deux ! J'utilise P3D comme simulateur, et tout est en anglais dans le réglage des paramètres dans le jeu. Sur mon Saitek , je voudrais paramétrer les 3 leviers avec : 1 / La poussée des gaz 2 / Les petits ailerons sur les ailes ( racourci " / " sur le clavier ) 3 / Les rétroréacteurs où reverses ( racourci " F2 " sur le clavier ) Mais impossible de trouver les bons termes pour ces 3 actions dans les réglages ! Auriez vous la gentillesse de me répondre et m'aider à régler ces 3 leviers ? Ce serait fort aimable de votre part . Je vous en remercie d'avance .Daniel de Cannes ( France) .daniel.schumacher31000@yahoo.fr .**************************************************** . Hello Nils to date the cockpit must be completely finished! What luck !!! I have the same passion as you and I also build a full size cockpit of an A320. I use the same device that you, the "pz45 Saitek throttle quadrant." You, you have two! I use P3D as a simulator, and everything is in English in adjusting settings in the game. On my Saitek, I would set the levers with 3: 1 / The thrust of the gas 2 / The small ailerons on the wings (shortcut "/" on the keyboard) 3 / rétroréacteurs which reverses (shortcut "F2" on the keyboard) But could not find the right words for these 3 actions in the settings! Would you be kind enough to answer me and help me to address these three levers? It would be very kind of you. Thank you in advance. Daniel Cannes (France) daniel.schumacher31000@yahoo.fr
Really well done. I was wondering at first, as the controls looked like gamer stuff. But now I see what you did. Soooo realistic! I can only imagine the cost. Every switch has to work, and it looks like you used real analog "backup" avionics. Not cheap... I used to install them in GA aircraft. Fly safe! Have fun!
nur ein beamer?? versteh ich nicht wenn man 20000 ausgibt und dann keine rundumsicht macht , oder haste 2 TVs?? Sind HD TVs nicht sowieso besser weil die richtig scharfes Bild machen ?? werden ja auch immer billiger
.:AirbusFan:. Pilot is a hard job. But if you really want it try go for it. But I can`t take that much responsibility. I like more technical things and planes. When I fly at home its safe for everyone.
It's great to know the materials, yolks, FMC, throttles, etc can even be purchased. This is going to be my retirement hobby. You did a fantastic job!
Your passion shows in what you have built...congratulations. You've done a spectacular job.
Just wanted to express my appreciation of your efforts to describe what it takes to undertake such a complicated task. Very few people do this without a charge. To make it even more useful, I would suggest to include a list of components together with their approximate costs. Thanks again!
My deepest respect for this great job. Very well done. And I love the flying videos too.
This had to be a labor of love (5 years) to build, wow! Great job... wish I had one in my garage :-)
same... i would love it so much... i really wanna be a pilot when im older but my eyesight is my only set back...
DatBossAM :D how bad is it? you might be surprised that its not a problem. as long as its ok when corrected you should be fine in a civilian job. military will be a problem. fighter pilots i know have to have perfect uncorrected vision.
***** My eyesight is really f*cking bad... -6.50 and -5.75, I wanna be a commercial airline pilot though anyway...
Excellent work looks pretty real for a home built flight simulator to me. Enjoy 😊
Super geiles cockpit! :) Baut ihr auch für andere leute solche cockpits? Weil ich bin nicht gerade der begabteste in sachen handwerk...
Und wie sieht es aus mit den kosten, falls ihr das preisgeben wollt...
Weiter so!! Werde gleich noch andere videos anschauen und auch mal den blog abchecken!
Hallo. Danke für deinen Kommentar. An diesem Cockpit haben wir nun über 3 jahre am bauen... Mehere Hundert, wenn nicht tausende Stunden Arbeit. Es gibt keine wirkliche Anleitung dazu. Im nachhinein müssten wir es uns zweimal überlegen ob wir wieder eins bauen würden. Zu den Kosten... Ich schätze mal so um die 15`000Euro für Material. Grüsse aus der schweiz. Nils
Wirklich ein absolut geiles cockpit, werd heute fangen meins zu "upgraden"!
Weiter so :)
Thank you for referring to my graphic panels and congratulations for this wonderful work.
Awesome set up.... Wow it is one of the best I have seen
wow thats nice, pls can u tell me where u got all the equipment?
absolutely stunning! very well done. the attention to detail is mind blowing.
Hallo. Ja eins nach dem anderem. Rundumsicht (160°) folgt im September... LCDs als Sichtfenster eignen sich nicht wirklich, da die Tiefenwirkung verschwindet.
Would love to see someone with this type setup up run FS 2020 at ultra 4K settings. Immersive!!!
Hi where did you get the cockpit decal ..sticker from please or template as they say ? thanks great stuff .
Hey I have liked and subbed love this vid! could u give me a link to where you purchased: 0:46 ??? and the landing gear lever? cheers. Can anyone reply If you know where I can purchase them
Thanks
man these are some serious skills if i had the funds id have you build one for me
where did you get the swiches from(5:37)
from where did u bought the panel at 7:06 ?
Looks absolutely great!
What you showed at time 7:00 can you make 1 and give me?
Bist du schweizer?? Auf jedenfall sehr sehr geiles projekt
Why did you buy the saitek yokes if you're going to change them anyway :O ?
Hi, it is wonderful, your skill is remarkable, I would like to seek your guidance in building a similar one for myself, Starting with where to get the panels dimensional drawings.
what program i use for this 1:12 ????
How much might it cost to have one custom built from you??? It's SOO cool. I really want one.
Hi, it took 5 years to build this. Thousands of hours work... And its a complex system which you have to understand what is working together. Greets Nils
... i figured. Wouldn't expect you to actually build another one.
Sehr schön. Wie viel hat das alles zusammen so gekostet? :)
Tiefenwirkung hat man doch beim Beamer auch nicht sondern erst bei 3D , oder wie meinst du das? War halt mal bei so einem proffesionelleren 737 Simulator und das (auch unscharfe) Beamer Fliegengitterbild fand ich schon extrem nervig deswegen dachte ich HD Tvs machen das realistischer
I always confused about the wiring. How you wire the yoke? And how much does it cost for 1 cockpit like yours?
probably alot
felix malvian do you mean the saitek yoke or the real yoke?
Homemade yoke. I really want to make it by myself
its gonna cost you much more for you to get the parts and all but if your gonna build a homemade cockpit.just go and ask aound in forums and such if anyone has a yoke for sale
felix malvian. Hi well we bought the yokes here: www.737yoke.com/prod_list.php Theyre very good quality.
Dude, I just saw something in french on a box u were painting on. Are you from Quebec?
where did u get the auto pilot panel. and where did u get all the other equipment
Well done Squire!
Nice work man! I think I see an eagle in that black frame on the wall!
Beautiful!! Nicely done.
Que habilidade !!! que trabalho magnifico !!!
MAGNIFIQUE !!!!! MAI LE COMMANDANT DE BORT !!!! Ses à GAUCHE PAS À DROITE😏😏.
SUPERBE SIMULATEUR JE VOUS FÉLICITE 👍👍👍👍👍👍👍.
dude, this is seriously awesome. very well done!!
Allright, and the result looks great !
DID U BUY OR MAKE THE RADIO STACK? AND AUTO PILOT PANEL?
Felicitaciones, notable trabajo!
This a question for everyone!
Without any rude replies, how easy is the wiring and do you think that an electricians degree at University may be of use?
MindstormExpert You don't need a degree to understand electricity. Just research the web.
I see you are missing the chem trails switch! Ha! Awesome setup!
Hello Nils, How did you make the side panels. do you have the dimensions or plans for them?
Thanks
buld one to meeee! ahah, how much cost to make one of these? and where do you get the parts and the controls? very nice!
Spectacular job my friend.
What cards are you using for the analog inputs ??
How much is it to build one of these bad boys???
Fred: hey bob you want me to take my ultra compact B737 round
Bob: yeah sure it should fit in my room right?
Fred: of course!
on a less sarcastic note WELL DONE
Espectacular trabajo. 10/10 Enhorabuena.
How much did it cost you in total?
do u have all info on how to build and how much u charge
Wow,that is nice,nice job i wish i could have one like that!!!
Hardware:
-CPFlight (kompl. Pedestal)
-AES (Yokes)
-Cockpitsonic (Overheadpanel)
-FI Gauges (Standby-Gauges)
how much did cost all together ?
Which program is it?? If its FSX how can you make every button or switch work? You need a special aircraft for the sim?
Hi Miguel. Yes its FSX. Now we use "Prepar3d" instead. Looks way betterYes every switch and displays are working. In our blog: b737home.blogspot.ch/ you can see how we build it. Use the translator if you need to. And its the default FSX B737-800 plane from FSX. Greets from Switzerland
Nils
What program/ software are running on the touch screen next to your CDU, which has the maps on?
Thanks
Wow exelent work?👌👌👌👌🙏🙏
Love it!!!!!!!!!! Would like to build one at home. Nice job
Where did you get it all???
how much did it cost to build.
how much wouls it be if you came to America and built one for me?
How money did you spend for this beauty ? (:
your blog doesnt list where you got the seat. where did you get it?
Hello. Those are real pilot seats. We found them somewhere on the internet. It was an announcement somewhere. SkyArt is selling some or Google.
can u do the mip separate to start with to sell
What screens did you use as flight instrument panel?
what material is that: 5:13 ?
ryaan beg . Hi, well is some sort of "isolation pad". You can find it in stores like "Home Depot". You put this things on the outside of a building to make it more energy efficiant.
nils169 Bonjour Nils., à ce jour votre cockpit doit être totalement fini ! Quelle chance !!!
Moi , j'ai la même passion que vous et je construis également un cockpit en taille réelle d'un A320.
J'utilise le même appareil que vous , le "Saitek pz45 throttle quadrant" .
Vous , vous en avez deux !
J'utilise P3D comme simulateur, et tout est en anglais dans le réglage des paramètres dans le jeu.
Sur mon Saitek , je voudrais paramétrer les 3 leviers avec :
1 / La poussée des gaz
2 / Les petits ailerons sur les ailes ( racourci " / " sur le clavier )
3 / Les rétroréacteurs où reverses ( racourci " F2 " sur le clavier )
Mais impossible de trouver les bons termes pour ces 3 actions dans les réglages !
Auriez vous la gentillesse de me répondre et m'aider à régler ces 3 leviers ?
Ce serait fort aimable de votre part .
Je vous en remercie d'avance .Daniel de Cannes ( France) .daniel.schumacher31000@yahoo.fr .**************************************************** .
Hello Nils
to date the cockpit must be completely finished! What luck !!!
I have the same passion as you and I also build a full size cockpit of an A320.
I use the same device that you, the "pz45 Saitek throttle quadrant."
You, you have two!
I use P3D as a simulator, and everything is in English in adjusting settings in the game.
On my Saitek, I would set the levers with 3:
1 / The thrust of the gas
2 / The small ailerons on the wings (shortcut "/" on the keyboard)
3 / rétroréacteurs which reverses (shortcut "F2" on the keyboard)
But could not find the right words for these 3 actions in the settings!
Would you be kind enough to answer me and help me to address these three levers?
It would be very kind of you.
Thank you in advance.
Daniel Cannes (France)
daniel.schumacher31000@yahoo.fr
Wow you have done an excellent job! :)
Where can i get the Autopilot panel?
What was the music you had before called?
Does it really works?
Or just for show
sunita Serrao, yes it works. I have some videos on my channel if you want to check it out...
Were you able to link the controls?
Und wie viele Arbeitsstunden ungefähr?
Wie teuer war das alles?
Really well done.
I was wondering at first, as the controls looked like gamer stuff. But now I see what you did. Soooo realistic!
I can only imagine the cost. Every switch has to work, and it looks like you used real analog "backup" avionics. Not cheap... I used to install them in GA aircraft.
Fly safe! Have fun!
How much does 1 homecockpit cost?
nur ein beamer?? versteh ich nicht wenn man 20000 ausgibt und dann keine rundumsicht macht , oder haste 2 TVs?? Sind HD TVs nicht sowieso besser weil die richtig scharfes Bild machen ?? werden ja auch immer billiger
love the aircraft + money + knowledge + skill + patient + time = dream simulator
Amigo como podemos hablar por interno ? Necesito saber todo sobre la construcción... Saludos desde Colombia
what flight program are u using ???
How much did it cost?
I wish you were more like Norwegian737Project. He actually talks in his videos.
What did you use as fmc
Becuase we didn`t plan to buy them in the beginning. Check out the 360° Panorama in the description under the video! Greets Nils
LOL you went overboard, whats next step? getting a 737's front skull?
This is my dream!!!
me too!!!!!!!
My dream is to be an Airline pilot of the REAL aircraft, not of the cockpit in my house lol.
My real dream is pilot because pilot is can play this game(?) but most important is I love plane
.:AirbusFan:. Pilot is a hard job. But if you really want it try go for it. But I can`t take that much responsibility. I like more technical things and planes. When I fly at home its safe for everyone.
백준성
You had better work on your English if you ever hope to fly a commercial airliner.
It's really perfect ... I loved it
nice job>>enjoy it
That's really amazing, Congrats...
Cât a costat să îl faci şi de unde pot face rost de componente necesare
Amazing work! Love it :)
Hi How much it cost you
Where is emergency extend landing gear lever?
How to get tutorial for a320 please help
this person went all out with this project
total price ???
RIP headphone users
Mr Xing ikr
why? there is no sound
HIKYYD r/woooosh
???
@@dmrxy. lol
So cool I'm amazed!! Looks like the real thing
Awesome. Well done
I postet link in description Box:
You have to print it out with a plotter...