How to clean a Rusty Petrol/Gas Tank - CBR900RRV

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.ย. 2024
  • www.facebook.c...
    Blade Diaries Part 2: After some youtube research I thought I would try the White Vinegar approach to remove the rust from the petrol tank...
    Part 2 of my attempt to restore a 1997 Honda Fireblade CBR900RR-V. The bike has not been started in 3 years and has been off the road since 2016. I also believe it housed a family of rodents at some point…
    This is my first ever attempt at anything beyond the usual oil change. I'm looking forward to getting this back on the road and learning some great lessons along the way.
    This is my first blade and a kind of dream since I was a kid (now I’m a big kid).
    On inspection it has:
    Rusty Tank
    Fork Seals gone
    Missing Fuel Tap
    Seized rear brake
    Non functioning front brakes (well, they work a little)
    Scored disks
    Lots of rust
    Needs new throttle and clutch cables
    www.facebook.c...

ความคิดเห็น • 13

  • @JackRay93
    @JackRay93 7 หลายเดือนก่อน +1

    You make it look easy, can I send my tank to you 😅

    • @TheBucksBiker-lh2nm
      @TheBucksBiker-lh2nm  7 หลายเดือนก่อน +3

      Ahahaha my back is still recovering from my one and wife still ain’t talking to me after stinking out the kitchen and using her hair dryer 😅

  • @stephenwalsh8184
    @stephenwalsh8184 6 หลายเดือนก่อน

    🏍👍

  • @marcellobraione281
    @marcellobraione281 5 หลายเดือนก่อน

    Bellissima 😊

  • @boriszenzel3434
    @boriszenzel3434 8 หลายเดือนก่อน

    краска внутри бака , в последующем ещё большие проблемы чем просто ржавчина

    • @gaborsiska6285
      @gaborsiska6285 8 หลายเดือนก่อน

      A POR-15 Tanktömítő egykomponensű műgyanta alapú festék, mely kiszáradása után hihetetlen kemény és üzemanyagoknak ellenálló bevonatot képez a tank belső falán.

  • @AshRowland
    @AshRowland 6 หลายเดือนก่อน +1

    Hi mate, how long did you leave the Bicarbonate of Soda in the tank? I'm not getting great results from the vinegar

    • @TheBucksBiker-lh2nm
      @TheBucksBiker-lh2nm  6 หลายเดือนก่อน

      Hey buddy… I only left the Bicarb in for about half an hour as its purpose is to naturalise the acids in the Vinegar. How long have you left the vinegar in? You might just need to go for it again and leave it longer.
      Mine didn’t look like it had worked until I got the pressure washer in on it! Turns of the vinegar had loosened it all up nicely.
      Another option is to go for a second attempt but add either small stones or bolts and screws and shake the f**k out of it. Of course it’ll be a lot of fun getting them all out.
      Hope it works out for you.. My new name as an influencer counts on your success 😅

    • @AshRowland
      @AshRowland 6 หลายเดือนก่อน

      @@TheBucksBiker-lh2nm it's been in for 24 hours so far, but I didn't exactly use industrial strength stuff, 5% from various shops and various types, ie malt, distilled, white... whatever I could get 22 litres of really 🤣
      OK, so BiCarb for cleaning afterwards, got it

    • @TheBucksBiker-lh2nm
      @TheBucksBiker-lh2nm  6 หลายเดือนก่อน +1

      @@AshRowlandyou need the 30% stuff and leave for at least 5 days… I got mine from eBay! Bought 15 litres.. Every day sloshed it around a little.

    • @AshRowland
      @AshRowland 6 หลายเดือนก่อน

      @@TheBucksBiker-lh2nm that'll be where I'm going wrong then 🤣🤣🤣

    • @TheBucksBiker-lh2nm
      @TheBucksBiker-lh2nm  6 หลายเดือนก่อน

      @@AshRowland As long as you didn’t chuck the chips is as well 😂