1960s Rusted Military Lantern Restoration
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2019
- This is the most beautiful Army Lantern i ever seen.
Was produced in France for Army in 1960 and was utilized for airplane signalization.
As you can see this lantern was metallic gray but behind was green, i don't know why, looks like was made like that.
This lantern was very oxidated and rusty. The two lenses were yellowish and blurred.
I decidet to make green this lantern to mach the original color.
Let me know what do you think about this restoration.
If you like it please Subscribe and hit the Bell notification!
Thank You so Much for Watching!
Amazon links
SandBlaster - amzn.to/2KPCXqP
Gloves - amzn.to/2ZmKbGL
Sandblaster media - amzn.to/2Zna3lL
Ring light - amzn.to/2Rflx84
Second studio light - amzn.to/2XdlIWT
Camer - amzn.to/2Rf47IV
Polishing wheel - amzn.to/2KXwV7J
Maybe you want to watch this :
1940s Vintage Powerboat Restoration - • 1940s Vintage Speed bo...
1960s Dump Truck Restoration -
• 1960s Dump Truck Resto...
Will it Light? Vintage Railroad Lamp Restoration -
• Vintage Railroad Lamp...
Epic Table Fan - Restoration -
• Epic Table Fan - Resto...
Broken Bench Grinder - Restoration -
• Rusty and Broken Bench...
Huge Lighter - Restoration -
• Huge Lighter - Restora...
PayPall www.paypal.me/tysytube
Patreon / tysytuberestoration
Instagram / tysytuberestoration
#old
#army
#greenlantern
Thank you for watching my video! After you finish watching you should check this Yellowed Playstation PS1 here: 😎🥰 th-cam.com/video/4HBr8NE17oc/w-d-xo.html
What do you do with all your finished restorations?
Your current polisher is fine. You need a new start capacitor. If you change 1 out, change both so you don't have to later.
👍
Hi Tysy. I have just restored a similar one of these myself. Would love it if you had time to check it out and give me some feedback 👍
My cat watched it with me. He didn’t take his eyes off the screen and purred the whole time. I think you have a new fan. 😻
My kitten does the same thing
That’s great 👍
My cats like watching restorations too! 😁🐈
Obviously your cat knows what's up
I am so glad you did not show the end result in the thumbnail. Part of the fun of watching the video is to see what the restoration will look like. It's like opening a birthday present. 😄
Great job as always!
That sandblaster is still hypnotic..
Yes, I want a go! :)
I would like a go at it too.
I like how you’re adding little captions throughout the video. Maybe add one at the end that tells us how long the whole restoration took? I’m genuinely curious. Love the video!
Yeah, please consider this
I like the fact you used holy water. If I did that, my hands would burst into flames.
Nice work!
Do you play clash of clans? Just curious
why else do you think hes wearing gloves?
That lamp was made the same year I was. Some days I feel in need of a restoration. You might give it a thought, a whole new TH-cam idea. The sandblasting might sting a little.
As always a great job on the restoration.
Lmfao
*In brightest day, in blackest night,*
*No evil shall escape my sight.*
*Let those who worship evil's might*
*Beware my power--Green Lantern's light!*
The nerd in me needed to say this hehe. Great job as always!
Nothing wrong with that good post
I did it too
Yeah but did u have to Google the correct phrasing? 😒
@@animatedant Actually, no I didn't. I edited it because Ibmade a typo. And it msde me cringe. Long live typing on my phone
Nice DC reference
Ryan Reynolds called, he wants his green lantern back😂😂 Great job👍
Nice.🙂
Yeah... Somebody had to say it !😁
Nope this is Alan Scott's Lantern not Hal Jordan's...
Ah yes, it's TysyTube time! Edit: sandblasting, snapping fingers to get things on the paper, great restoration! GREAT!
You forgot: By pure TysyTube magic the reflector got all nice and shiny again. Magic :)
Normal price: $20,00 - After restoration: $3500,00
@ 5:08 yes I certainly want to try! I I need a sandblaster. Manual sanding with paper just a pain in the posterior and never this good.
Sandblasting is actually really fun, it’s literally all I do at work and you can get paid good money.
Then sandblasting part is my favorite.
Louis Faasen And it’s satisfying to watch.
I was hoping you would flash at the TYSY sign on the wall when it was dark. Good stuff, my friend!
The Lord of the lanterns nailed it again!!!😄👍🏻💡
Nice one! Lol
I like how you are not afraid to take things apart and that you are so meticulous about every little piece. Great restoration 😃
I thought the lamp would be older like 30s or 40s at the earliest 👍
The military was still using these in Germany in 1980/81. We got repair parts for them to keep them functional. They were heavy and bulky, but they did light well. I seem to remember the ones we had also came with red lens/lens covers for night operations. Nicely done, sir.
Thank you for not trying to modernize it with LED's and other crap.
It's beautiful the way it is - exactly how it was when it was new.
And a great colour too. I think the grern suits it. Love watching you sandblast stuff. 👍
I don't know why I like watching these restorations. I just do.
The green lantern shines like a jewel!
My favorite restoration is you restoring old lamps. I would really like to try sandblasting myself .
Holy water and happy paradise dish soap. That makes for a blessed restauration! And yes... as usual, a LIPO and LEDS in there!!!
Holy water Batman! What a restoration!
10 views and 26 likes
man you're so good people must be liking your video twice!
Dude they like first watching after 😉
Views are calculated differently now - it doesn't count if you just open the video, you have to watch at least half of it for it to count as a view.
The green rattle can paint is impressive! It covers very well!
Wizard King of restorations, congratulations
I love that you put a mirror like finish on every part. Not just those that will show once reassembled. Nice job.
Really nice workmanship on this lamp. The front light was to get to the landing zone. The dome light identified the landing zone, one worked but more was better. Usually had 4 to I'd the pad area.
That green color is beautiful 😍
Now THAT’s the Green Lantern I wanna see :D
Another restoration under your belt Tysy well done
Good restoration ,this lasts another lifetime
The Green Lantern Corp will be happy you restored their lantern
There's something relaxing and satisfying watching something get sandblasted...
Thank you for the beautiful restoration. The video was wonderful to watch at the end of a bland week.
You should sell you restored items to "Pawn Stars". Mr. Rick will defenitely love your restoration and give a reasonable price for it. And I loved to see you on television Mr. Tysy.
Awesome job as always that sandblaster is like the best thing you own for restorations like these keep up the great work my friend
Excellent work of the master! )
I didn’t think all of it was green colour. I would keep the handles and the top frame silver by polishing them only. Well done man✌🏼👍🏼👍🏼✌🏼👍🏼
Love watching you fix this beautiful lantern, wish I had the skills to do stuff like this! And yes, I would loooove to have a go with the sandblaster, it's so satisfying to watch!
Karina, you can get the skills by doing stuff like this. Start small, you will fail some times, but failing is a great teacher. And before you know it, you will own a sandblaster box.
No CGI and still much better than the original Green Lantern film! Kudos to you, sir!
Over the Top! TY ...Newk from Kentucky USA
I watched a lot of restoration videos. but you are the best 👍
you haven't watched enough then
Definitely looks greenlatern from cartoons very awesome job
Good job
colleague!!!
Don`t buy a new bench grinder, restore it!
Agreed. A bench grinder / polisher that works and is paid for is the best kind.
replace capacitor on grinder should turn the right way right away if not install one
take the capacitor off completely, and you can spin the motor in the direction that you want. i did that to my sears lathe motor, and i can run it in reverse to cut sanding time in half.
Psft🤷🏿♂️
@@timpani25 Potentially dangerous, though. Most grinders spin downwards for a reason. If an upwards-spinning grinder grabbed the work it would fling it up into your face.
The sandblaster is mesmerizing
Like a kid I get so excited every time you use a sand bluster :D :D
You are a true genius...you know all the machanism..the electrical part and color knowledge..its amazing..!!👏👏👍
In case of zombies You have all of lamps from the whole world :-)
So I commend you on not only doing good work but working without having the radio going! Hahaha love the videos
Haha good point I was so caught up in the video I didn't notice.
For a polisher, maybe find an old, but good high-torque low-rpm bench grinder and make a restoration video on it. I'd love seeing that. Big fan, take care
That is a BEAUTIFUL lamp you've restored and your restoration was PERFECT.
Love the green color! 💚
Tysy, you are methodical during your breakdowns. No piece on any project is missed. Incredible video! I've come to expect nothing less than exceptional... you never disappoint!
A beautiful piece of history.!!!
Very Cool Old Army Lantern Sir !!!!!!!
I would love to be able to do this all day - not the video/editing part but just the restorations. Another great piece my friend!
I love how meticulous and careful you are in what you do. I've watched some other restoration videos and they're either very heavy handed or just lazy. like with the contacts assembly, the fact that you took the whole thing apart to clean/restore it, on other channels they would have just left it together. I'm always very impressed by your work.
Sandblaster looks fun
Где ты берёшь эти ретро вещи .И ты за деньги восстанавливаешь или это так работа для души хобби так сказать.. 👍😉
This was particularly satisfying, nice work!
I can't believe that the gaskets were good enough to re-use. Great job!
It's a pleasure watching you work in all these restorations.
*This man is highly skilled and well trained you need to be skillful agile and above all you need to be fast and very safe or as I always say TysyTube is a professional! my sincere congratulations!*
Indeed, many pieces. You did a great job!
Motor: gonna speen clockwise
TysyTube: I'm about to end this man's whole career
Such a pretty green for tools
Great work as always!
I so love your work, and the best part is you are not afraid of hand tools. Sometimes you just need that feeling of how much to torque something.
My Dad worked for the London Electricity Board back in the days when they made these torches. They were standard issue for maintenance staff. They were identical to this one except for the cage at the top.
The dark green and polished metals look amazing, love it when every piece is polished, painted or coated! Really beautiful! And you should just do a refurbish on your bench grinder, we've all watched you use it since it had that wierd box on it and now it needs some love too!
Sandblasting is so satisfying
Yours are consistently the most immaculate restoration results I see on TH-cam. Always a joy! Oh, and your next grinder/polisher should be one you restore, of course!
I just subscribed yesterday and my history is already blowing up with your videos!
For a metal polishing grinder, I used a belt-driven mandrel powered by a motor mounted to the bench. You can change rpm of the motor and the mandrel allows you to get all around parts without interference from a motor casing. Worked well for me.
Expert craftsmanship and engineering.
You did it again... No words, just action. Love it!!
Great restoration! The lantern is now a museum quality showpiece.
Very very good job
Excellent result , worth all the hours put into it . Terrific !
Yes, I want to try using a sandblaster. It is fantastic!
Tu as un talent fou pour restaurer ces objets bravo pour ton magnifique travail
merci 😊
I need that sand blaster in my life.
c'est toujours avec un tres grand plaisir que je visionne vos restorations , tres bien filmé en prime ,bravo encore un superbe travail !! merci .
I feel very happy as notification comes from you tube that tysytube has posted a video
As always you have smashed this one into orbit fantastic paint job and I look forward to the next one thank you Brian
Hello everyone
Very beautiful lamp indeed, it is rare lamps like that.
Nice work as usual.
See you soon for a new video.
Bonjour a tous
Très belle lampe en effet ,c'est rare des lampes comme ça.
Beau travail comme d'habitude.
A bientôt pour une nouvelle vidéo.
Very good restoration 👍👍👍. Please do a restoration on your grinder and make it a give away 😍😍😍
Lovely
I love your lantern restorations.
awesome video gives me the confidence to restore my signaling lantern like this one
Hi Tysy , again wonderful job. Started having my wife watch your videos and she enjoys it. I wanna start making it a daily thing with her.
I love it when he puts paint stripper on stuff and when he sandblasts stuff 🔥🔥🔥🔥 plus the final product
"In brightest day, in blackest night, no evil shall escape my sight, let those who worship evil's might, beware my power... Green Lantern's light!"
Great video!
Yay! Paint stripper and MC - 51 are back!
Je vous écris de l'Espagne.
Il y a longtemps que je vous suive au TH-cam
Bravo! pour votre travail, c'est magnifique!
Merci
Watching other people work is very relaxing 😀
Why are these videos so addictive? Anyways, excellent work!
Another excellent restoration!