Hopefully, this helps out with some of the confusing Sony setups out there. Are you having any other issues with the RS2 and your Sony cameras? What is the setup you like using?
Hi! I got an issue even I change to 1080p. When I connect the camera to the gimball I lost feed of the Raven eye in my smartphone. It totally blank while I can see my A7III screen. The only way to see the Raven eye feed is to disconnect the camera from gimball but I can't use the rec button then. Can u help me?
@@keith-knittel I used the cable Sony multi to connect A7III to RSC2 but it never works so I used the other cable that worked. But when I got the Raven eye with those cable I can't have at the same time the Raveneye feed and the possibility to use the rec button of the final cause is not connect to a7iii. I think it's my Sony multi that got a problem because I found so many videos that said it's the only cable working for the A7III. So Amazon is sending me a new RSC2 box with all the cables. I will see it it will work
Using the USB-C cable with PC Remote for my a7C and RSC2 disables Face/Eye tracking for autofocus. I didn't realise this until recently. Multi cable doesn't work at all as the a7C doesn't have this port. Very poor design choices by Sony.
Hi when I connect the Raven Eye wifi it forces me to disconnect my Ronin, this prevents me from re-centering with my phone or doing auto tracking…any suggestions?
You're a lifesaver Keith! Was having RavenEye remorse as I couldn't see the back of my Sony A6500 while getting a live feed on my phone. Turning off the HDMI on my camera settings did the trick and I'm forever grateful. Of course I had to subscribe :-)
Glad to help, Christopher! While I'm happy you found me and subscribed, I wish this system worked together a little easier. This was a lot of trail and error and research just to figure out what worked! Again, glad to help and thanks for watching and subscribing.
It's years later but a lot of this still applies. I am new the DJI world. I just got an RS3 and Raven Eye. This gives me some things to try. My biggest issue is that if you hit the record button in the app it doesn't record to the camera. Maybe you just have to hitrecord on the actual gimbal? The directions/tutorials that DJI supplies are subpar at best. Thank you for the help!
Hi! Very helpful video! I just bought RS2 and connected to my A7SIII. I upgraded firmware on Raven Eye. It's possible to connect camera with USB-C to USB-C cable (gimbal's top port), HDMI to Raven Eye's HDMI-C and then USB-C on Raven Eye to gimbal's bottom slot. This way I can control camera with gimbal and with the app (including start and stop recording with a button and with a phone, changing exposure setting, etc.). It also works at FX3.
I hope this answers some of your questions! If it doesn't comment below and I'll try my best to help out, or if there are more issues people are coming across - include it in my next video
For everyone out there using the RS4 and FX30, go to 9:00 if you can't get your display to mirror while using Ronin and Raveneye. Brilliant work, saving lives out there.
Could't get active track working with my Sony A7 Rii- this video was a lifesaver in troubleshooting it and getting things to work (with the multi cable)- much appreciated!
How’d you get it? Just bought this thing for my a7r3 too but the active tracking went out and the gimbal stopped moving. Green bracket still tracks me but no gimbal movement now. So frustrating
Just got an RS2 and a Sony A6600. This has been a super-helpful video - very well-structured as well as clearly explained with great presentation. Thank you so muc!
Thank you for this video. This helped me fix the back display not showing up when connected to RavenEye. When I switched off HDMI info display on A73, it worked
FINALLY - Awesome video!!! Thanks for addressing the "ridiculous" setup with the Ninja V passing the signal to the RavenEye in 4K mode with Face Tracking :-D I'll look for a used one now to get this working and boy am I looking forward to it!!!
This one took forever to research and film! Sorry it took so long, but I think it will help people going forward. Thanks for the suggestion of making the ridiculous setup!! I love the ridiculous setups, building stuff like that seems overkill but others (like yourself!) find value in that so I'm glad you mentioned it. Had a good time making that and thanks again for the suggestion! Also, I checked out your drumming and really liked your BMTH teardrops video!
@@keith-knittel fantastic! I was hoping that I wouldn’t have to go down the Ninja V route just because the of the extra cost and as I’m filming myself playing drums I don’t really have a use for the actual monitoring features. Getting to 4K completely at some point is the goal though and if that’s what it takes then so be it 😂
There is quite a learning curve if you’re new to gimbals, but once you get the hang of one, they’re all pretty similar. Thanks for watching and your support!
Llevo mucho tiempo intentando saber cómo podía ver la pantalla de la A7SIII cuando enchufaba el HDMI... Y me lo has aclarado perfectamente. A parte de todo lo demás, que también ha sido muy instructivo. Muchas gracias por todo.
I have an a73 (not a7s3)and recently bought the RS2. Even using the Sony Multi cable I was getting a black camera screen when raveneye connected (phone and gimbal connected). Once I turned "HDMI info Display" to Off is when my a73 screen began working. Thanks Keith!
Oh man! I had to disconnect the Micro USB cable from my Alpha7R2 in the RS2, and that was the only way to watch, in the ReavenEye, while was recording with all the functionalities, record button, controlling the focus, false colors, zebra, everything, but I can not control the speed shutter, ISO and F adjustment anymore, obviously, because the camera is not connected to the gimbal, but, I had to choose one option... and that sucks! Great video by the way!
Sorry for the late response, it's tough to choose the cables and which functionality you'll be using for which application! Wish is was simplified - I hope things are smoothed out for the next version somehow. Thanks for the kind words and watching!
@Keith Knittel, I'm on the RSC2, I'm not sure if it's different from the RS2.. but the big issue I'm having is inconsistency with recording 4k video and keeping the activetrack/camera control active. On a fresh bootup, and the first initial "hit record" everything works smoothly with 4K... when I press stop - that's it. When I try to press record through the app again, active track and camera control through the app is disabled. It's very finicky. I am using the setup as prescribed, the USB-C to Multi, the USB-C Raveneye to USB-C Gimbal, and of course the HDMI to Micro-HDMI to the Sony A7RIII. Boot sequence is as described in your video as well.
Did you ever nail down this issue? I was planning on getting either the RS2 or RSC2 this week to use with my a7RIII, but it seems like a lot of people have trouble with that camera on these gimbals using ActiveTrack. It's not a feature I need immediately, but I want to make sure it's an option in the future if/when I do need it.
The newest firmware update might have fixed the a7siii USB-C issues. I am now able to plug into the USB C on the the camera and connect directly to the RS 2 port without issues. In the Raveneye App I have control over ISO, Shutter, Aperture and can run/stop from both the app and the REC button on the RS2 body. Hopefully other users have the same experience! It’s super handy now.
Thanks for the kind words and subscribing! There are so many different variables, and their different from camera to camera - It’s confusing but glad to help.
This was really helpful, thank you Keith! The start-up sequence has proved faultless in my tests so far, compared with my previous attempts. Have there been any improvements on how well the Raveneye keeps a target central since you created this video? I've found that the location in the frame where you first create the tracking frame is important, eg. if you want the subject to stay in the centre, draw your box around it when it's in the centre and it'll do a pretty good (but not perfect) job of keeping it more or less in the centre. Thanks again!
Glad it helped! There are so many little details with this setup that if you get wrong, will cause some strange issues. Thanks for watching and subscribing!
This week I got my RS 3 Pro and tried a new approach to using the Ninja V with my A7III: I bought the extended Smallrig Plat for the Gimbal and mounted the Ninja V directly in front of the display of the A7III, leaving around 5cm space so I can flip the sony display up :) it works really really good and I can use my Ninja V as the main display while shooting ☺️☺️☺️ And the best thing: no cables hanging around :)
Glad it helped, Dave! This video was really specific, so glad people have been able to find it and find it useful. Thanks for watching and subscribing!
@@keith-knittel One thing I figured out (the hard way) and didn't see in your video: if my A7Siii is set to 4k HDMI output the RavenEye is going to display a black screen.
This is a shame! I got stuck with the same problem! I bought the A7III because it's a amazing camera for photography and filmography! But when I match it to the RS2 pro and noticed these compatibility problems I got really sad because it's a expensive setup but not fully functional and and I think Sony is need to improve software because I feel them really limited and I am sure this could be fix with an software update
It’s unfortunate that the a7iii has these issues, I used the a7iii for a long time and wish I could use face af in 4K with hdmi out but it’s a limitation of the camera. I’d love if they fixed that with a software update but I don’t think they’re going to do it. Maybe for the next version of the a7iii. Thanks for watching
Thanks for that seq to start up for future use of this setup. I'm still messing with the DJI RSC 2 before I start recording a music video. My stupid a7IV gave me an overheating headache and thought it was linked to all of these things running, but it's just a Sony brainfart and updated the thermo threshold setting to High. (SONY, WHAT THE HECK?) That camera is not supposed to overheat. That's why I got it, but on the first try here in Florida, 🤯 OH warning.🤯 The ports on the left side of the camera were somewhat warm, so I thought it was because all those ports were running hard. I miss the old days of real large cameras that never had any of these issues, floating on my bulky analog, terminator looking, back breaking stabilizer... Vest, and all.😂😂😂😂 CHEERS!
Fantastic video thank you for sharing your knowledge of the issues you have encountered. I'm using a Sony a6600 with the RSC2, not sure if is my lack of understanding the tech, which is very possible as i am still learning and have a long way to go but, the whole system and having to use the app, phone, reveneye, gimble and camera, to unlock certain functionality is insane and I just don't understand why DJI cant streamline the system and create a fully working environment with gimble, camera, and monitor. Seems clunky lazy and a money grab to get you to purchase more equipment than shouldn't really be necessary. Maybe it is just me but I feel that we have so much tech these days and this should be easily possible.
There is a lot of tech with this setup for sure. The problem (I’m assuming) is that there are a lot of cameras out there and they are all different. Some features/pain points are with the cameras themselves (not being able to see your screen on an a7iii while shooting in 4K with an hdmi out is a fault of the camera - not the gimbal or raveneye) there are tons of cameras and things, it’s exciting that this is possible - and once the tech matures even more things will be better in the future I’m sure. But I understand your frustration! Took a lot to get this working
I use the cable to control my a6400 with the gimbal. Manual focus, iso, or focus can be adjusted with the wheel. Somehow the camera doesn't have HDMI out when connected like that.
Hi Keith! After a lot of tests I have found out that the problem is in the PROXY setting, if you deactivate it, you will see the image on the external devices, Gimbal RS3 PRO and Iphone in my case, and NOT on the camera, always in 4k, on the other formats does not occur. If you Activate PROXY when pressing REC on the RS3 PRO you will only see the image on the camera, and not on external devices. I was thinking of an additional screen like the Ninja, the Iphone eats up the battery right away, or going to the compatible ones that Sony says, the article below. LOL !! 😅 I have found this from Sony itself, it tells you what is visible on the camera and on the external device depending on the format, search this title from Sony: "When the camera is connected to an external device via HDMI during movie recording, no image appears on the camera monitor." Or in Sony Camera Online User Guide, search file format -> video -> read below, where it says NOTE. Best regards!!
Yeah. But still impossible to use HDMI out from your camera to an external monitor TOGETHER with USB-C from the camera to USB-C on the gimbal AND retain camera control functionality with the wheel on the gimbal.
great video 🙂I use the USB-C cable with the Sony A7S III. The USB-C cable I put in the top port(RSS) of the gimbal. After that I connect the raveneye to the lower port on the giimbal and the single USB-C port on the raveneye. not the USB-C(RSS) port next to the HDMI port. With this setup I can start/stop a video and can also change the camera settings. For example, I change my iso via the dial function on the RS2. The problem with this setup, however, is that you cannot view the recordings made on the cam. You have first disconnect the USB-C cable between the cam and the gimbal.
Very interesting! I didn't try that combination, I think that will work - however you would lose active track, right? Since the bottom port typically connects to the non-rss usbc port on the raveneye? I can test this later, but just curious if you knew off the top of your head. Thanks for watching and bringing that up! The testing never ends!
@@danielguetschow Hey there Daniel, I misread that first comment and thought you were doing something different? That is how I first tried to get my camera to work and this wasn't working for me. Did you enable any settings to get this working?
So Keith... with sony a7IV this problem is solved i can use the usb-c cable to control camera setings exposure iso etc and rec/stop button while having the feed on the ronin app ?
Hey there, unfortunately I don't have an A1 to test out. Feel free to send me one, and I'll do some testing though! Haha, I'll make an update if I can get my hands on one.
Keith, thank you so much for all of your videos on getting the Raveneye, dji and Sony working together. A question for you, did you experience any issues capturing audio with the setup you use or any recommendations from your trial and error?
Hey there Jim, thanks for the kind words! Glad to help! I don't typically have any issues capturing audio using a shotgun mic on top of the camera. That being said, I don't use the captured audio in long takes. If I'm using a gimbal I'm usually using it for shorter clips. What audio issues are you running into? Thanks again for the really kind words and watching
I've been using DJI drones for years. I just purchased the rsc2 for my Sony A7riii. Complete disaster. No picture with raveneye. Unable to use active track. Can you give any guidance on this. I'm about ready to send it all back. DJI missed big time with this.
Hi, I don't use an external monitor but I would like to record 4K using Activetrack on my A7iii. Is this possible? You covered a lot of interesting features and limitations. BTW, I have the RSC2 and love it! I was hoping that the addition of active track would provide even more functionality. I was only 1/2 right. No wonder, B&H doesn't carry it. The documentation bites!
Great video! How about using active track for a75 with the Sony multi? I seem to have black screen always when using active track but I have no hdmi cable? Should I have a hdmi cable as I don’t think there’s one for mini to usb c or Sony multi :) thanks!
Thanks for sharing!! So if I don't want to use my phone or an external monitor, is it possible to: - have the A7SIII not blacked out - 4k - active track - adjust ISO etc on the wheel? this video was so detailed and well done but I still don't know, it's almost 4 AM send help :D
Yes to some of it. Ha. I haven't been able to get the A7SIII to change settings with the RS2. Check out how I've been using the RS2 and Sony cameras section of this video. I've been manually adjusting my settings and using the sony cable to have the least amount of headaches
@@keith-knittel I did get it to work so I could use the wheels for settings! Seems really good for ISO... but having a blacked out monitor... not sure if that's the long term play haha btw, maybe this is just me being stupid, but I never know which cable is which and the box has a million different ones. If you show a super short close up of which cable you're talking about, the next tutorial will be EVEN BETTER!!! :D Thanks for the video bud! cheers
@@philippblank It seems like there is always some kind of hack way or drawback of doing things while using the USB-C cables and sony camera. The cables should come labeled in the box, or did you remove those labels? Haha.
That's really the easiest way if you're not using any camera controls or raven eye transmitting. The more complicated the tech gets the more errors and head scratching can happen sometimes. If I'm doing quick shots, I tend to not use any cables or transmitters either! Starting and stopping recording is one cable that I do use all the time though just for convenience sake
Hi Keith, thanks for this! I'm having issues with the audio. The clips that appear in the phone app, don't seem to have any audio in it. Does the raveneye transmit any audio at all?
my rs2 is acting weird with charging, I charged it the whole night. and when I woke up it was only 12%... I have the rs2 for about 2 months now. With close to no wear at all.
Hey there thanks for the kind words. Unfortunately that’s a limitation of the a6400, won’t have a feed on the back of the camera when filming in 4K with an hdmi out
It's sad Sony supplies such a bad API to manufacturers. All the other brands have 1 cable for everything, we have a mixed bag of everything, working half of the time. Really hoping Sony is willing to work with 3 party brands to fix this but I'm not getting my hopes up.. Great video nonetheless!
It is pretty frustrating to have to do so much trial and error to get find out which things work. I think since the A7III and A6400 have similar problems it's a processing issue? but the A7S III has a stronger processor it can handle more computing power? Let's hope the A7IV has lots of horsepower to fix all of these issues. Thanks for watching and your thoughts!
@@keith-knittel as I understand it’s because of the underlying implementation of their USB C port. It’s powerful enough, but when plugged in the A7iii thinks it’s powered to a pc and it switches all it’s power to that port, eliminating a lot of functionality for nothing. The API/SDK they provide to third party brands isn’t all that great either. I guess it could be fixed with software, but oh well :p
@@Deleunes Interesting! That is really frustrating that the camera is being held back like that - maybe this is their way of making the next generation of cameras more attractive? Not sure, thanks for that info though. I didn't know that!
Saludos, cuento con una SONY A9 y el RONIN rs2, puedo visualizar correctamente las imagenes de la camara a travez de la aplicación del ronin en el celular, y grabar desde el botón del RONIN, y cuando esta conectado solo se visualiza la pantalla en el celular mas no en la cámara, sin embargo cuando se empieza una grabación la imagen en el celurar se vuelve negra y eso si es un problema ya que no puedo visualizar ni en la cámara ni en el celular lo que se esta grabando. por otro lado puedo activar el seguimiento activetrack y se hace perfecto, pero al momento de presionar el botón grabar se pierde esta función.
Awesome video! I have two issues though, that I still can’t seem to kill... 1) when connected to RavenEye, I can’t playback footage on my camera (A7S iii) 2) connecting with the Sony Multi cable, I get an error message saying “Invalid with this lens” every time I touch the focus wheel Any idea to get around those two? Can’t find any info anywhere
I have not ran into these issues, the second one though - I don't use the focus motor much for my lenses. I rely on autofocus or manually focusing the lens for smaller movements and just moving the camera within the desired field of focus. Are you trying to watch your footage / photos on your Ronin App? Thanks for watching and the kind words
@@keith-knittel thank you for the reply! Yes it’s weird, I fix the second issue by changing the function of the wheel on the ronin. The playback is still weird. When I press the playback button on my Sony, the screen just turns black.. I managed to get it to show the playback on the phone connected to the raveneye now, but I still can’t find out how to get playback on the actual camera too.. very weird
hello, when i use this cable with a7iii i dont have steady shot function (is off), when i change to micro usb cable steady shot is ok but control wheel dont work with focus :(
Thanks for this. There is no raveneye support for my Sony A1 so I hope this helps. I do not have a Ninja V. I suspect the A7S III setup might work. Complicated.
@@keith-knittel I tested the two cables and setup that you described for the A7S III on my A1. With the Sony multi cable I just got the same error - no feed, nothing. With the USB-C connected between the Raveneye and the camera I got a feed and could active track, but I could not start or stop recording from controls on the RS2. I could start recording on my phone in the DJI Ronin app, but it did not record on the media in the camera. I can stop and start the recording on the camera itself. Not optimal. But I got further than before, so thanks for your contribution.
@@marchonore Dang! Well, I hope DJI rolls out a firmware update that allows the A1 to be used with the sony multi cable. It's nice that active track works if you need to use it, although the no start/stop recording is a pretty big bummer. Thank you so much for following up, I can point future A1 questions to this comment. Thanks again!
Hi mate, do you have any updates about this issues after a couple of years? I really need to be available to control my camera settings through the app while I can see the image from the camera!
I can't control the Shutter speed, aperture or ISO using my phone. Should I be plugging the USB C from RS3 to Multi port on my Sony Camera or to USB C on Sony Camera?
Hello Keith, Great work on your video! Quick question: I'm using Sony A6500 with DJI SC 3 Pro Gimbal. Trying to connect using the Micro USB port on the camera to the USB C port on the Gimbal. Can't get them to talk to each other. It keeps alternating saying Connecting and Disconnected every second. Please help! Is it a cable issue? I'm using a single short Micro USB to USB-C data cable.
hi and thanks for your incredible work. i have a strange issue, i have the rsc2 combo pro connected to Sony a6400, everything works well, but when i activate the focus and zebra assist on my app, i can see the zebra and red focus assist both on my video and inside the app all over the parameters on display. have no idea why...
Hey just a question, would I be able to adjust my camera settings on the a7iii while recording in 1080p? Thanks! This video really helps me as I just got my hands on the RS2
Hello, I am using the Sony Alpha IV and connected the Raveneye via the Hdmi Cable to my camera and as soon indonthis the camera screen turns black. How can i fix that?
please help me with something, have you used it in portrait mode? it doesn't work in portrait with a rs3pro and a7iv. i already updated camera gimbal and raveneye
Hello congratulations very good. What brand is your monitor? the HDMI monitor outputs are one in and one out ... how are they connected? Sony monitor out and monitor in connected to RavenEye?
I have an FX3 and my problem is when I turn everything on regardless of the order, and swipe down on the RS2 Screen, there's this message saying: "raveneye not connected with gimbal or camera hdmi port" I have tried every cable combination, including those you explain in the video and the settings in the fx3 are also the same as you show. Is this something I can fix or could it be a faulty raveneye ? (I'm able to connect to it through the app, I see all the controls available, force mobile and joystick work, but..grey screen, no image on my phone. I'm completely clueless.
Ooh man, very frustrating. It should be the same as the A7S III - did you connect the RavenEye properly? I have a RavenEye connection video (I would link it but I'm on my phone right now)
Sorry if this question has been answered. Can you get a raven eye feed from a cable other than the HDMI C (mini) cable. It would be great if I could do it all with a smaller sleeker USB c cable or something. Please let me know as I didn't understand if I could do it through this totorial
Hey there, I'm not sure of any differences between the RS2 and RSC2 since I don't have the RSC2, but take a look at the A7III portion of this video. Are you filming in 4K with the raven eye? Any HDMI out with the A7 iii filming in 4K will black out the rear screen.
i appreciate the video. always enjoy your content. but i'm giving up on the raven. i just can't figure it out with my fx3. it's going to be the death of me!!
@@keith-knittel keith, thanks for the prompt response here. i just couldn't let it go... not sure how i missed this but it was my hdmi resolution, which was set at 2160p. switching to 1080p resolved my blank screen issue (iphone 8 plus) menu / settings / external output/ hdmi output settings / output resolution / 1080p* *fyi: auto should be the default setting in fx3. there are four options: auto, 2160p, 1080p, 1080i. only 1080p worked for me.
I am frustrated that the gimbal works so poorly with the Sony a1. I am still not able to satisfactory get it to work properly with the a1. Are there other gimbals out there that are compatible with Sony cameras or is this a Sony issue ?
Maybe I'm the only person to have this problem, but I'm not able to capture photo with the RS 2 and the Sony a7iii. RavenEye works pretty well but capture photo and so timelapse and panorama don't. Anyone who encountered this problem ? Otherwise, it's a really great video, well explained !
Ooh man, I havent updated my A7III in a while. I'm not sure which firmware it's on, but it's been...easily 2 years since I've updated it. I also havent shot many photos recently with it, this was working before the software update? Is there an update for the RS2 or RavenEye since this previous Sony firmware came out? Thanks for bringing that up!
@@keith-knittel Thank you so much to take time to answer me ! In fact, it's me who did just one error. I'm feeling a little bit stup... 😣 With RS 2, so many cables are provided to us, and it's absolutely essential to take the one on which is written "USB-C TO Sony Multi". With another USB-C to Micro USB cable provide in the pack, it work well for adjusting ISO, aperture ... BUT you will not be able to capture photo if you don't plug THE Sony cable. So it's not a firmware problem. It works well now 😃 Just two days to see that I had not plug the right cable 😓. Also, it's interesting to see that with the "USB-C TO Micro USB" cable plug on Sony multi, it possible to control focus, ISO, shutter and aperture. So for those who don't be able to capture photo (and if it is the only problem encountered), make sure to use THE "USB-C TO Sony Multi" !
@@loicissanchou4157 So many cables! Thanks for pointing that out and if someone has this issue in the future I'll direct them to this comment. Thanks for following up, Loic! And glad you figured out the issue!
@@keith-knittel Yeah there are so many cables but for good reasons I think. And the Sony cable must surely be very specific as there are not Canon or Nikon named cable. And yes I subscribed to your channel. Your content is really interesting 😉
I'm having issues with the Sony a6600, Ronin RS3 + Raveneye. When using the camera control cable, I can change the camera settings through the Ronin App but there is no image from the camera to the app. Without camera control cable, I have image and track, but can't control any camera settings from the app. Any advice? Thanks!
Are you in an area with lots of wifi / interference? I havent ran into any bad lag issues with the RS2/raveneye/ronin app yet. Are you using an older device?
When I connect my usb c cable from the Sony a7iii to the gimbals RSS port and then go into the DJI/Raven Eye screen, it gives me the message connecting… usb. From the on it just stays on that message and I don’t get any feed. I’ve tried switching in camera setting regarding usb connection, but nothing seems to work. I’ve tried looking on forums but nobody seems to have this problem. Maybe someone in the comments can help me out on this issue!
Hi Keith, thankyou for the vid. Can i confirm something. You said the screen on the A7s3 won’t work in conjunction with the screen on the RS2 when shooting in 4k. Is that correct?
Hey Keith, I've watched your video but I'm still having issues getting the raveneye to work on my A73. I can't get a feed to show up in the ronin app. I even lowered my HDMI output resolution and recording resolution to 1080 and it didnt solve it. I've changed every setting in hdmi settings, I've used both Multi and USBC and it's the same issue just a blank screen in the app. I tried the differing boot up sequences you mentioned, nothing has worked. I've also tried changing to 'monitor only' instead of 'auto' in the viewfinder/monitor menu. I thought it was a bad hdmi port but my 4k monitor works perfectly. I hooked up my bmpcc 6k too and it worked perfectly so its not that I have a bad raveneye. I just recently got my rs2 and I don't know what fresh hell this is. Please any advice would be superhelpful.
Hopefully, this helps out with some of the confusing Sony setups out there. Are you having any other issues with the RS2 and your Sony cameras? What is the setup you like using?
Hi! I got an issue even I change to 1080p. When I connect the camera to the gimball I lost feed of the Raven eye in my smartphone. It totally blank while I can see my A7III screen. The only way to see the Raven eye feed is to disconnect the camera from gimball but I can't use the rec button then. Can u help me?
@@inessupertramp Which cable are you using? The USB-C cable?
@@keith-knittel I used the cable Sony multi to connect A7III to RSC2 but it never works so I used the other cable that worked. But when I got the Raven eye with those cable I can't have at the same time the Raveneye feed and the possibility to use the rec button of the final cause is not connect to a7iii. I think it's my Sony multi that got a problem because I found so many videos that said it's the only cable working for the A7III. So Amazon is sending me a new RSC2 box with all the cables. I will see it it will work
Using the USB-C cable with PC Remote for my a7C and RSC2 disables Face/Eye tracking for autofocus. I didn't realise this until recently. Multi cable doesn't work at all as the a7C doesn't have this port. Very poor design choices by Sony.
Hi when I connect the Raven Eye wifi it forces me to disconnect my Ronin, this prevents me from re-centering with my phone or doing auto tracking…any suggestions?
You're a lifesaver Keith! Was having RavenEye remorse as I couldn't see the back of my Sony A6500 while getting a live feed on my phone. Turning off the HDMI on my camera settings did the trick and I'm forever grateful. Of course I had to subscribe :-)
Glad to help, Christopher! While I'm happy you found me and subscribed, I wish this system worked together a little easier. This was a lot of trail and error and research just to figure out what worked! Again, glad to help and thanks for watching and subscribing.
@@keith-knittel Know what you mean! I’ve spent about a half day and that’s after you did all the hard work :-)
It's years later but a lot of this still applies. I am new the DJI world. I just got an RS3 and Raven Eye. This gives me some things to try. My biggest issue is that if you hit the record button in the app it doesn't record to the camera. Maybe you just have to hitrecord on the actual gimbal? The directions/tutorials that DJI supplies are subpar at best. Thank you for the help!
I have the same issue with Sony ZV-E1. Have you found a workaround?
Hi! Very helpful video! I just bought RS2 and connected to my A7SIII. I upgraded firmware on Raven Eye.
It's possible to connect camera with USB-C to USB-C cable (gimbal's top port), HDMI to Raven Eye's HDMI-C and then USB-C on Raven Eye to gimbal's bottom slot. This way I can control camera with gimbal and with the app (including start and stop recording with a button and with a phone, changing exposure setting, etc.). It also works at FX3.
I'll have to try this!! I havent upgraded my firmware and I'll have to give this a try now. Thanks for the update!!
I can't wait to watch this in detail. I've been scouring message boards trying to find fixes to the problems. Thanks in advance!
I hope this answers some of your questions! If it doesn't comment below and I'll try my best to help out, or if there are more issues people are coming across - include it in my next video
For everyone out there using the RS4 and FX30, go to 9:00 if you can't get your display to mirror while using Ronin and Raveneye. Brilliant work, saving lives out there.
Glad to help! It can be a complicated/frustrating process figuring this out
That crazy Ninja V setup is exactly what I want to do.. how random, but perfect that you covered all of that.. thank you thank you THANK YOU!!!
It's a wild setup, but glad it was helpful! Haha. Thanks for watching!
The pace of you video is really good for beginners like me. A lot of the other creators that I’ve seen are just too fast for me.
Could't get active track working with my Sony A7 Rii- this video was a lifesaver in troubleshooting it and getting things to work (with the multi cable)- much appreciated!
No problem, glad to help! It took me a lot of trial and error to get this working! Haha
How’d you get it? Just bought this thing for my a7r3 too but the active tracking went out and the gimbal stopped moving. Green bracket still tracks me but no gimbal movement now. So frustrating
Just got an RS2 and a Sony A6600. This has been a super-helpful video - very well-structured as well as clearly explained with great presentation. Thank you so muc!
Glad it was helpful! There could be a lot of setup and "gotchas" with this - happy to help!
Thank you for this video. This helped me fix the back display not showing up when connected to RavenEye. When I switched off HDMI info display on A73, it worked
Thanks, Keith. Just got the RS2 and Raven Eye Thursday (6/24) and I am up and running thanks to your tutorial!
Congrats on the new gimbal and glad to help, Daren!
glad to see all of this resolved now on the fx3
Same!
Just picked up an RS 2 earlier today to pair with my A6600. This video was awesome and so very helpful, thank you!
Glad it helped! Congrats on the new gimbal!
Sir ! Super useful a year down the road ! Thank you for this !
Glad it was helpful!
FINALLY - Awesome video!!! Thanks for addressing the "ridiculous" setup with the Ninja V passing the signal to the RavenEye in 4K mode with Face Tracking :-D I'll look for a used one now to get this working and boy am I looking forward to it!!!
This one took forever to research and film! Sorry it took so long, but I think it will help people going forward. Thanks for the suggestion of making the ridiculous setup!! I love the ridiculous setups, building stuff like that seems overkill but others (like yourself!) find value in that so I'm glad you mentioned it. Had a good time making that and thanks again for the suggestion! Also, I checked out your drumming and really liked your BMTH teardrops video!
@@keith-knittel fantastic! I was hoping that I wouldn’t have to go down the Ninja V route just because the of the extra cost and as I’m filming myself playing drums I don’t really have a use for the actual monitoring features. Getting to 4K completely at some point is the goal though and if that’s what it takes then so be it 😂
Thx for this. I just got the RS2 and weeding through the learning curve now. Cheers and I subbed.
There is quite a learning curve if you’re new to gimbals, but once you get the hang of one, they’re all pretty similar. Thanks for watching and your support!
Llevo mucho tiempo intentando saber cómo podía ver la pantalla de la A7SIII cuando enchufaba el HDMI... Y me lo has aclarado perfectamente. A parte de todo lo demás, que también ha sido muy instructivo. Muchas gracias por todo.
I have an a73 (not a7s3)and recently bought the RS2. Even using the Sony Multi cable I was getting a black camera screen when raveneye connected (phone and gimbal connected). Once I turned "HDMI info Display" to Off is when my a73 screen began working. Thanks Keith!
Glad to help! Can be kind of confusing when choosing the different settings
Oh man! I had to disconnect the Micro USB cable from my Alpha7R2 in the RS2, and that was the only way to watch, in the ReavenEye, while was recording with all the functionalities, record button, controlling the focus, false colors, zebra, everything, but I can not control the speed shutter, ISO and F adjustment anymore, obviously, because the camera is not connected to the gimbal, but, I had to choose one option... and that sucks! Great video by the way!
Sorry for the late response, it's tough to choose the cables and which functionality you'll be using for which application! Wish is was simplified - I hope things are smoothed out for the next version somehow. Thanks for the kind words and watching!
Thanks - solve my problems with BLACK Monitor on Sony !❤
@Keith Knittel, I'm on the RSC2, I'm not sure if it's different from the RS2.. but the big issue I'm having is inconsistency with recording 4k video and keeping the activetrack/camera control active. On a fresh bootup, and the first initial "hit record" everything works smoothly with 4K... when I press stop - that's it. When I try to press record through the app again, active track and camera control through the app is disabled.
It's very finicky. I am using the setup as prescribed, the USB-C to Multi, the USB-C Raveneye to USB-C Gimbal, and of course the HDMI to Micro-HDMI to the Sony A7RIII. Boot sequence is as described in your video as well.
Did you ever nail down this issue? I was planning on getting either the RS2 or RSC2 this week to use with my a7RIII, but it seems like a lot of people have trouble with that camera on these gimbals using ActiveTrack. It's not a feature I need immediately, but I want to make sure it's an option in the future if/when I do need it.
The newest firmware update might have fixed the a7siii USB-C issues. I am now able to plug into the USB C on the the camera and connect directly to the RS 2 port without issues. In the Raveneye App I have control over ISO, Shutter, Aperture and can run/stop from both the app and the REC button on the RS2 body. Hopefully other users have the same experience! It’s super handy now.
This is awesome news! I don’t have an a7c to test this with, but I’m glad this is working!! Thanks for the update!
subbed just because this video was SO helpful! glad I found your channel. I have the A6600 and have so many bugs with the DJI RS2 I lament using it.
Thanks for the kind words and subscribing! There are so many different variables, and their different from camera to camera - It’s confusing but glad to help.
Thank you so much for the content. It helped me so much with some issues I was having with de RS2. Thank you!
Glad to help out! Thanks for watching!
Thank u so much!! Super helpful
Can u charge the attached camera by the gimbal
Thank you so much, saved me soooo much time in setup with a FX3. Very much appreciated.
Glad to help! I assume it’s the same setup as the a7siii, right? Haven’t used an fx3 yet. Thanks for watching!
@@keith-knittel Correct, menu's and actions are the same.
thank you for the great video!
This was really helpful, thank you Keith! The start-up sequence has proved faultless in my tests so far, compared with my previous attempts. Have there been any improvements on how well the Raveneye keeps a target central since you created this video? I've found that the location in the frame where you first create the tracking frame is important, eg. if you want the subject to stay in the centre, draw your box around it when it's in the centre and it'll do a pretty good (but not perfect) job of keeping it more or less in the centre. Thanks again!
Subbed thank you so much !!! Was having a hard time with the A7Siii and having the screen blacked out
Glad it helped! There are so many little details with this setup that if you get wrong, will cause some strange issues. Thanks for watching and subscribing!
This week I got my RS 3 Pro and tried a new approach to using the Ninja V with my A7III:
I bought the extended Smallrig Plat for the Gimbal and mounted the Ninja V directly in front of the display of the A7III, leaving around 5cm space so I can flip the sony display up :)
it works really really good and I can use my Ninja V as the main display while shooting ☺️☺️☺️
And the best thing: no cables hanging around :)
Which extended smallrig plat ?
LOVE this Keith, thank you so much for taking the time to put this together. Just what I was looking for . Subscribed :-)
Glad it helped, Dave! This video was really specific, so glad people have been able to find it and find it useful. Thanks for watching and subscribing!
Fantastic video man thank you very much for your work
Thank you for the kind words and hope the video was helpful!
HDMI Info. Display just works for my black display with my A1 and RS3. Thanks!
Very informative. Thank you for making this. Subscribed.
Glad you enjoyed the video and thanks for subscribing!
@@keith-knittel One thing I figured out (the hard way) and didn't see in your video: if my A7Siii is set to 4k HDMI output the RavenEye is going to display a black screen.
This is a shame! I got stuck with the same problem! I bought the A7III because it's a amazing camera for photography and filmography! But when I match it to the RS2 pro and noticed these compatibility problems I got really sad because it's a expensive setup but not fully functional and and I think Sony is need to improve software because I feel them really limited and I am sure this could be fix with an software update
It’s unfortunate that the a7iii has these issues, I used the a7iii for a long time and wish I could use face af in 4K with hdmi out but it’s a limitation of the camera. I’d love if they fixed that with a software update but I don’t think they’re going to do it. Maybe for the next version of the a7iii. Thanks for watching
Thanks for that seq to start up for future use of this setup. I'm still messing with the DJI RSC 2 before I start recording a music video. My stupid a7IV gave me an overheating headache and thought it was linked to all of these things running, but it's just a Sony brainfart and updated the thermo threshold setting to High. (SONY, WHAT THE HECK?) That camera is not supposed to overheat. That's why I got it, but on the first try here in Florida, 🤯 OH warning.🤯
The ports on the left side of the camera were somewhat warm, so I thought it was because all those ports were running hard.
I miss the old days of real large cameras that never had any of these issues, floating on my bulky analog, terminator looking, back breaking stabilizer... Vest, and all.😂😂😂😂
CHEERS!
This is thorough! Thanks
Sorry for the late response, but glad it was helpful!
Wow great work! Thank you
Glad you liked it!
Fantastic video thank you for sharing your knowledge of the issues you have encountered. I'm using a Sony a6600 with the RSC2, not sure if is my lack of understanding the tech, which is very possible as i am still learning and have a long way to go but, the whole system and having to use the app, phone, reveneye, gimble and camera, to unlock certain functionality is insane and I just don't understand why DJI cant streamline the system and create a fully working environment with gimble, camera, and monitor. Seems clunky lazy and a money grab to get you to purchase more equipment than shouldn't really be necessary. Maybe it is just me but I feel that we have so much tech these days and this should be easily possible.
There is a lot of tech with this setup for sure. The problem (I’m assuming) is that there are a lot of cameras out there and they are all different. Some features/pain points are with the cameras themselves (not being able to see your screen on an a7iii while shooting in 4K with an hdmi out is a fault of the camera - not the gimbal or raveneye) there are tons of cameras and things, it’s exciting that this is possible - and once the tech matures even more things will be better in the future I’m sure. But I understand your frustration! Took a lot to get this working
I use the cable to control my a6400 with the gimbal. Manual focus, iso, or focus can be adjusted with the wheel.
Somehow the camera doesn't have HDMI out when connected like that.
Hi Keith! After a lot of tests I have found out that the problem is in the PROXY setting, if you deactivate it, you will see the image on the external devices, Gimbal RS3 PRO and Iphone in my case, and NOT on the camera, always in 4k, on the other formats does not occur.
If you Activate PROXY when pressing REC on the RS3 PRO you will only see the image on the camera, and not on external devices. I was thinking of an additional screen like the Ninja, the Iphone eats up the battery right away, or going to the compatible ones that Sony says, the article below. LOL !! 😅
I have found this from Sony itself, it tells you what is visible on the camera and on the external device depending on the format, search this title from Sony: "When the camera is connected to an external device via HDMI during movie recording, no image appears on the camera monitor." Or in Sony Camera Online User Guide, search file format -> video -> read below, where it says NOTE.
Best regards!!
Thx. I would be interested in sony a7 iv with dji rs3 pro combo (raveneye..). What about you make an updated video? 😊
Yeah. But still impossible to use HDMI out from your camera to an external monitor TOGETHER with USB-C from the camera to USB-C on the gimbal AND retain camera control functionality with the wheel on the gimbal.
thank you so much keith !!! finally i got it.
Glad to help! There are a lot of different combinations/issues out there!
Hello! I need some help if you may. How can you set up audio in Raven eye? Don't find the way, all my videos are mute. Thank you!
great video 🙂I use the USB-C cable with the Sony A7S III. The USB-C cable I put in the top port(RSS) of the gimbal. After that I connect the raveneye to the lower port on the giimbal and the single USB-C port on the raveneye. not the USB-C(RSS) port next to the HDMI port. With this setup I can start/stop a video and can also change the camera settings. For example, I change my iso via the dial function on the RS2. The problem with this setup, however, is that you cannot view the recordings made on the cam. You have first disconnect the USB-C cable between the cam and the gimbal.
Very interesting! I didn't try that combination, I think that will work - however you would lose active track, right? Since the bottom port typically connects to the non-rss usbc port on the raveneye? I can test this later, but just curious if you knew off the top of your head. Thanks for watching and bringing that up! The testing never ends!
Hey @@keith-knittel active track works for me with this setup 🙂.
@@danielguetschow Hey there Daniel, I misread that first comment and thought you were doing something different? That is how I first tried to get my camera to work and this wasn't working for me. Did you enable any settings to get this working?
@@keith-knittel hm I don't think so. I set the cam only to PC Remote On.
Thank you!
You're welcome!
So Keith... with sony a7IV this problem is solved i can use the usb-c cable to control camera setings exposure iso etc and rec/stop button while having the feed on the ronin app ?
I was really hoping that I could focus the lens through the multi cable, I guess I need to go manual and use the motors
I love this guy!!!
I love you!! Haha. I hope that means you found the video helpful! Thanks for watching
Hello Keith! I purchased the Sony A1 3 months ago, and now picked up the RS2... have you ever worked with this pairing? Thanks for the detailed video!
Hey there, unfortunately I don't have an A1 to test out. Feel free to send me one, and I'll do some testing though! Haha, I'll make an update if I can get my hands on one.
Keith, thank you so much for all of your videos on getting the Raveneye, dji and Sony working together. A question for you, did you experience any issues capturing audio with the setup you use or any recommendations from your trial and error?
Hey there Jim, thanks for the kind words! Glad to help! I don't typically have any issues capturing audio using a shotgun mic on top of the camera. That being said, I don't use the captured audio in long takes. If I'm using a gimbal I'm usually using it for shorter clips. What audio issues are you running into? Thanks again for the really kind words and watching
I've been using DJI drones for years. I just purchased the rsc2 for my Sony A7riii. Complete disaster. No picture with raveneye. Unable to use active track. Can you give any guidance on this. I'm about ready to send it all back. DJI missed big time with this.
The a7riii and the a7iii have similar menus and drawbacks. Check out the a7iii portion of this video - I hope this helps!
It's an old video, but I wanted to ask. Do the motors on the Ronin work harder with those cables hanging like that? Does this impact the battery?
Evertime I Start raveneye my face detection auto focus turn off
Hi, I don't use an external monitor but I would like to record 4K using Activetrack on my A7iii. Is this possible? You covered a lot of interesting features and limitations. BTW, I have the RSC2 and love it! I was hoping that the addition of active track would provide even more functionality. I was only 1/2 right. No wonder, B&H doesn't carry it. The documentation bites!
Great video! How about using active track for a75 with the Sony multi? I seem to have black screen always when using active track but I have no hdmi cable? Should I have a hdmi cable as I don’t think there’s one for mini to usb c or Sony multi :) thanks!
Thanks for sharing!!
So if I don't want to use my phone or an external monitor, is it possible to:
- have the A7SIII not blacked out
- 4k
- active track
- adjust ISO etc on the wheel?
this video was so detailed and well done but I still don't know, it's almost 4 AM send help :D
Yes to some of it. Ha. I haven't been able to get the A7SIII to change settings with the RS2. Check out how I've been using the RS2 and Sony cameras section of this video. I've been manually adjusting my settings and using the sony cable to have the least amount of headaches
@@keith-knittel I did get it to work so I could use the wheels for settings! Seems really good for ISO... but having a blacked out monitor... not sure if that's the long term play haha
btw, maybe this is just me being stupid, but I never know which cable is which and the box has a million different ones. If you show a super short close up of which cable you're talking about, the next tutorial will be EVEN BETTER!!! :D
Thanks for the video bud! cheers
@@philippblank It seems like there is always some kind of hack way or drawback of doing things while using the USB-C cables and sony camera. The cables should come labeled in the box, or did you remove those labels? Haha.
I was using gimbals for many years without any cables starting and adjusting all the setting on camera ;)
That's really the easiest way if you're not using any camera controls or raven eye transmitting. The more complicated the tech gets the more errors and head scratching can happen sometimes. If I'm doing quick shots, I tend to not use any cables or transmitters either! Starting and stopping recording is one cable that I do use all the time though just for convenience sake
Hi Keith, thanks for this! I'm having issues with the audio. The clips that appear in the phone app, don't seem to have any audio in it. Does the raveneye transmit any audio at all?
I have sony a7iii and ronin rs2, I'm having trouble with the active track Isnt working with the Sony USB-c to multy 2 cable
Hey there, have you watched my A7III portion of this video?
i need to update the a7iii I missed that, I'm gonaa try that now
my rs2 is acting weird with charging, I charged it the whole night. and when I woke up it was only 12%... I have the rs2 for about 2 months now. With close to no wear at all.
Hello, great video so there is no way we can have the video feedback on our device and on the A6400 screen while filming in 4k ?
Hey there thanks for the kind words. Unfortunately that’s a limitation of the a6400, won’t have a feed on the back of the camera when filming in 4K with an hdmi out
It's sad Sony supplies such a bad API to manufacturers. All the other brands have 1 cable for everything, we have a mixed bag of everything, working half of the time. Really hoping Sony is willing to work with 3 party brands to fix this but I'm not getting my hopes up.. Great video nonetheless!
It is pretty frustrating to have to do so much trial and error to get find out which things work. I think since the A7III and A6400 have similar problems it's a processing issue? but the A7S III has a stronger processor it can handle more computing power? Let's hope the A7IV has lots of horsepower to fix all of these issues. Thanks for watching and your thoughts!
@@keith-knittel as I understand it’s because of the underlying implementation of their USB C port. It’s powerful enough, but when plugged in the A7iii thinks it’s powered to a pc and it switches all it’s power to that port, eliminating a lot of functionality for nothing. The API/SDK they provide to third party brands isn’t all that great either. I guess it could be fixed with software, but oh well :p
@@Deleunes Interesting! That is really frustrating that the camera is being held back like that - maybe this is their way of making the next generation of cameras more attractive? Not sure, thanks for that info though. I didn't know that!
I have the Sony A7ii, how are you seeing video feed on the cameras monitor? For me it turns off the display and I can only see it on the Dji app.
Saludos, cuento con una SONY A9 y el RONIN rs2, puedo visualizar correctamente las imagenes de la camara a travez de la aplicación del ronin en el celular, y grabar desde el botón del RONIN, y cuando esta conectado solo se visualiza la pantalla en el celular mas no en la cámara, sin embargo cuando se empieza una grabación la imagen en el celurar se vuelve negra y eso si es un problema ya que no puedo visualizar ni en la cámara ni en el celular lo que se esta grabando. por otro lado puedo activar el seguimiento activetrack y se hace perfecto, pero al momento de presionar el botón grabar se pierde esta función.
Awesome video! I have two issues though, that I still can’t seem to kill...
1) when connected to RavenEye, I can’t playback footage on my camera (A7S iii)
2) connecting with the Sony Multi cable, I get an error message saying “Invalid with this lens” every time I touch the focus wheel
Any idea to get around those two? Can’t find any info anywhere
I have not ran into these issues, the second one though - I don't use the focus motor much for my lenses. I rely on autofocus or manually focusing the lens for smaller movements and just moving the camera within the desired field of focus. Are you trying to watch your footage / photos on your Ronin App? Thanks for watching and the kind words
@@keith-knittel thank you for the reply! Yes it’s weird, I fix the second issue by changing the function of the wheel on the ronin. The playback is still weird. When I press the playback button on my Sony, the screen just turns black.. I managed to get it to show the playback on the phone connected to the raveneye now, but I still can’t find out how to get playback on the actual camera too.. very weird
J’ai un Sony A77II quel est en rapport qualité prix et surtout un moniteur externe tactile le plus complet pour mon rs2 .merci
hello, when i use this cable with a7iii i dont have steady shot function (is off), when i change to micro usb cable steady shot is ok but control wheel dont work with focus :(
Thanks for this. There is no raveneye support for my Sony A1 so I hope this helps. I do not have a Ninja V. I suspect the A7S III setup might work. Complicated.
I wish I had a Sony a1 to test out, let me know what you come up with Marc. Thanks for watching and commenting
@@keith-knittel I tested the two cables and setup that you described for the A7S III on my A1. With the Sony multi cable I just got the same error - no feed, nothing. With the USB-C connected between the Raveneye and the camera I got a feed and could active track, but I could not start or stop recording from controls on the RS2. I could start recording on my phone in the DJI Ronin app, but it did not record on the media in the camera. I can stop and start the recording on the camera itself. Not optimal. But I got further than before, so thanks for your contribution.
@@marchonore Dang! Well, I hope DJI rolls out a firmware update that allows the A1 to be used with the sony multi cable. It's nice that active track works if you need to use it, although the no start/stop recording is a pretty big bummer. Thank you so much for following up, I can point future A1 questions to this comment. Thanks again!
Hi mate, do you have any updates about this issues after a couple of years? I really need to be available to control my camera settings through the app while I can see the image from the camera!
I can't control the Shutter speed, aperture or ISO using my phone. Should I be plugging the USB C from RS3 to Multi port on my Sony Camera or to USB C on Sony Camera?
Hello Keith, Great work on your video! Quick question: I'm using Sony A6500 with DJI SC 3 Pro Gimbal. Trying to connect using the Micro USB port on the camera to the USB C port on the Gimbal. Can't get them to talk to each other. It keeps alternating saying Connecting and Disconnected every second. Please help! Is it a cable issue? I'm using a single short Micro USB to USB-C data cable.
hi and thanks for your incredible work. i have a strange issue, i have the rsc2 combo pro connected to Sony a6400, everything works well, but when i activate the focus and zebra assist on my app, i can see the zebra and red focus assist both on my video and inside the app all over the parameters on display. have no idea why...
Hey just a question, would I be able to adjust my camera settings on the a7iii while recording in 1080p? Thanks! This video really helps me as I just got my hands on the RS2
Hello, I am using the Sony Alpha IV and connected the Raveneye via the Hdmi Cable to my camera and as soon indonthis the camera screen turns black. How can i fix that?
please help me with something, have you used it in portrait mode? it doesn't work in portrait with a rs3pro and a7iv. i already updated camera gimbal and raveneye
Hello congratulations very good. What brand is your monitor? the HDMI monitor outputs are one in and one out ... how are they connected? Sony monitor out and monitor in connected to RavenEye?
Hey there Sebastinao, I have a whole video on my channel dedicated to this if you want to dig deeper into connecting a monitor. I'm using the Ninja V
i get video but when i hit record everything goes black
is it compatible with sony ax53 camcorder?
Hello Keith, i am having an issue with dual card recording while my sony a7iii is connected on a gimbal through usb cable. Any recommendations?
I have an FX3 and my problem is when I turn everything on regardless of the order, and swipe down on the RS2 Screen, there's this message saying: "raveneye not connected with gimbal or camera hdmi port" I have tried every cable combination, including those you explain in the video and the settings in the fx3 are also the same as you show.
Is this something I can fix or could it be a faulty raveneye ? (I'm able to connect to it through the app, I see all the controls available, force mobile and joystick work, but..grey screen, no image on my phone. I'm completely clueless.
Ooh man, very frustrating. It should be the same as the A7S III - did you connect the RavenEye properly? I have a RavenEye connection video (I would link it but I'm on my phone right now)
Sorry if this question has been answered. Can you get a raven eye feed from a cable other than the HDMI C (mini) cable. It would be great if I could do it all with a smaller sleeker USB c cable or something. Please let me know as I didn't understand if I could do it through this totorial
Hey there, you’ll need to use the hdmi cable to get the video feed. Usbc cable doesn’t transmit video
on active track dont focus me. on sony A7iii with sony GM automatic. i need to instal the motor on RS2?
Will be this guide helpful for DJI RCS 2 with Sony A7iii ? When i connect my reveneye on A7iii my phone screen is black
Hey there, I'm not sure of any differences between the RS2 and RSC2 since I don't have the RSC2, but take a look at the A7III portion of this video. Are you filming in 4K with the raven eye? Any HDMI out with the A7 iii filming in 4K will black out the rear screen.
i appreciate the video. always enjoy your content.
but i'm giving up on the raven. i just can't figure it out with my fx3. it's going to be the death of me!!
Thanks for the kind words, the FX3 should behave the same as the A7S III - have you ran into any issues that were different from the A7S III?
@@keith-knittel keith, thanks for the prompt response here. i just couldn't let it go...
not sure how i missed this but it was my hdmi resolution, which was set at 2160p. switching to 1080p resolved my blank screen issue (iphone 8 plus)
menu / settings / external output/ hdmi output settings / output resolution / 1080p*
*fyi: auto should be the default setting in fx3. there are four options: auto, 2160p, 1080p, 1080i. only 1080p worked for me.
I am frustrated that the gimbal works so poorly with the Sony a1. I am still not able to satisfactory get it to work properly with the a1. Are there other gimbals out there that are compatible with Sony cameras or is this a Sony issue ?
Maybe I'm the only person to have this problem, but I'm not able to capture photo with the RS 2 and the Sony a7iii. RavenEye works pretty well but capture photo and so timelapse and panorama don't. Anyone who encountered this problem ?
Otherwise, it's a really great video, well explained !
Edit : I had the Sony firmware 3.10 and I updated to 4.01 but I'm no more able to capture photo.
Ooh man, I havent updated my A7III in a while. I'm not sure which firmware it's on, but it's been...easily 2 years since I've updated it. I also havent shot many photos recently with it, this was working before the software update? Is there an update for the RS2 or RavenEye since this previous Sony firmware came out? Thanks for bringing that up!
@@keith-knittel Thank you so much to take time to answer me !
In fact, it's me who did just one error. I'm feeling a little bit stup... 😣 With RS 2, so many cables are provided to us, and it's absolutely essential to take the one on which is written "USB-C TO Sony Multi". With another USB-C to Micro USB cable provide in the pack, it work well for adjusting ISO, aperture ... BUT you will not be able to capture photo if you don't plug THE Sony cable.
So it's not a firmware problem. It works well now 😃
Just two days to see that I had not plug the right cable 😓.
Also, it's interesting to see that with the "USB-C TO Micro USB" cable plug on Sony multi, it possible to control focus, ISO, shutter and aperture.
So for those who don't be able to capture photo (and if it is the only problem encountered), make sure to use THE "USB-C TO Sony Multi" !
@@loicissanchou4157 So many cables! Thanks for pointing that out and if someone has this issue in the future I'll direct them to this comment. Thanks for following up, Loic! And glad you figured out the issue!
@@keith-knittel Yeah there are so many cables but for good reasons I think. And the Sony cable must surely be very specific as there are not Canon or Nikon named cable.
And yes I subscribed to your channel. Your content is really interesting 😉
I'm having issues with the Sony a6600, Ronin RS3 + Raveneye. When using the camera control cable, I can change the camera settings through the Ronin App but there is no image from the camera to the app. Without camera control cable, I have image and track, but can't control any camera settings from the app. Any advice? Thanks!
Thank u so much.. I have problems with image lagging on the Phone.. Howcan I solve it?
Are you in an area with lots of wifi / interference? I havent ran into any bad lag issues with the RS2/raveneye/ronin app yet. Are you using an older device?
When I connect my usb c cable from the Sony a7iii to the gimbals RSS port and then go into the DJI/Raven Eye screen, it gives me the message connecting… usb.
From the on it just stays on that message and I don’t get any feed.
I’ve tried switching in camera setting regarding usb connection, but nothing seems to work.
I’ve tried looking on forums but nobody seems to have this problem. Maybe someone in the comments can help me out on this issue!
my raveneye not show wifi plz help
same issue with a7rii?
Has anyone figured this out with sony rii and raveneye?
Hi Keith, thankyou for the vid. Can i confirm something. You said the screen on the A7s3 won’t work in conjunction with the screen on the RS2 when shooting in 4k. Is that correct?
Hey there Dale, thanks for the kind words. Do you mean the active track wont work with the A7SIII when shooting in 4K?
Hey Keith, I've watched your video but I'm still having issues getting the raveneye to work on my A73. I can't get a feed to show up in the ronin app. I even lowered my HDMI output resolution and recording resolution to 1080 and it didnt solve it. I've changed every setting in hdmi settings, I've used both Multi and USBC and it's the same issue just a blank screen in the app. I tried the differing boot up sequences you mentioned, nothing has worked. I've also tried changing to 'monitor only' instead of 'auto' in the viewfinder/monitor menu. I thought it was a bad hdmi port but my 4k monitor works perfectly. I hooked up my bmpcc 6k too and it worked perfectly so its not that I have a bad raveneye. I just recently got my rs2 and I don't know what fresh hell this is. Please any advice would be superhelpful.
despues de actualizar el raveneye en mi celular , ya no aparece mas el wifi del raveneye, alguien me puede ayudar?
Anyone using a canon m50? I’m having real trouble when active track and maintain a consistent camera feed from the Raven eye device