Dodge Ram box with 2 kicker cvr 10s fiberglass made

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น •

  • @ICT_Anton
    @ICT_Anton ปีที่แล้ว +1

    Man thank you so much for the video... I've been trying to figure out since I got my Ram if it would hurt anything structurally to cut that metal out of there... Now I know. Thank you. That definitely increases my sub options enclosure options

  • @jasonbrown681
    @jasonbrown681 3 ปีที่แล้ว +3

    Once again great work. Fiberglass is sometime and effort. Nice work JR way to be creative!!!

  • @1coop164
    @1coop164 3 ปีที่แล้ว +12

    Let us hear them! The ram community desperately needs this!

  • @diegovargas3744
    @diegovargas3744 4 ปีที่แล้ว +1

    I really like that video. Really cool to see the process of building the box and install

  • @3RDERA
    @3RDERA 4 ปีที่แล้ว +4

    Nicely done! you’re definitely getting some good throw out of the subs in that added airspace nice job!

  • @2mouthbassin
    @2mouthbassin 3 ปีที่แล้ว +2

    Awesome idea for more airspace. Apparently the only use for the piece that was cut out was to create storage areas under the seat. Now where's my hacksaw?

  • @djmjr77
    @djmjr77 2 ปีที่แล้ว +2

    I made a box that fits a kicker CompRT 12 without having to remove the package tray.. cut out the carpet, lined the passenger side underseat storage area with sound deadener (home depot flashing seal tape) then put a piece of 3/4 MDF over it, through bolts along the front and cut side pieces to follow the contour of the floor, PL glued the whole thing down.. had to raise the back seat because it sat on the box top, but that worked out cause it now allowed me to fold down the rear seats and mounted the amp on the back wall.. thing hit really hard no issues.. may have been slightly undersized volume wise but filled with poly fill and it shook the truck throughly..

    • @stephentringale5865
      @stephentringale5865 2 ปีที่แล้ว +1

      Love it when it hits hard.whats the key to making it Hit Hard..not the vibrate garbage?

    • @djmjr77
      @djmjr77 2 ปีที่แล้ว

      @@stephentringale5865 getting rid of the vibration noises is a monotonous task.. just take car of one thing at a time.. on of my biggest offender was the overhead console. Ended up pulling it down and hot melt gluing all of the peices together. Def takes tome to get them all..

    • @renepineda23
      @renepineda23 10 หลายเดือนก่อน

      ​@@djmjr77
      How much does it cost to do all that work cutting the metal and build the box for 2 8 inch dds 608f

  • @turytorres25
    @turytorres25 4 ปีที่แล้ว

    Great job to Jr. and the rest of the team, Keep the content coming.

  • @dallasburns4311
    @dallasburns4311 11 หลายเดือนก่อน +4

    What is the best tool to cut the metal with? I was thinking about doing this with my 2012 RAM, but run 4 8's facing forward, and the vent on top of the hump in the middle.

    • @sammyvidal4654
      @sammyvidal4654 9 หลายเดือนก่อน +1

      Did you ever give this a try thinking of two 8s facing forward as well 🤔 might need to add some spacers on the seat frame to lift up some more.

    • @zachreece8410
      @zachreece8410 7 หลายเดือนก่อน

      @@sammyvidal4654I’m in the same boat with a single 8.

  • @stephentringale5865
    @stephentringale5865 2 ปีที่แล้ว +2

    Amazing Work man!!!..hey that truck sounded good any idea what it had for exhaust?

  • @coldfuzion14
    @coldfuzion14 ปีที่แล้ว +1

    How much airspace did you net with that box?

  • @wolfmanking100
    @wolfmanking100 6 หลายเดือนก่อน

    good job on that box

  • @coltonyordy726
    @coltonyordy726 ปีที่แล้ว

    Are you guys able to do a drop in for two 15 inch subs? I can cut the metal out myself and install myself. Also how much space is left between the top of the box and the seat bottom?

  • @jonon1989
    @jonon1989 3 ปีที่แล้ว +1

    How can I have this done? Where you located?

  • @jerrysmith6181
    @jerrysmith6181 3 ปีที่แล้ว

    I have a 2019 dodge ram classic. I'd like to have mine done the same way but built out of wood would be fine.is that something yall do?

  • @coreypavinski7511
    @coreypavinski7511 2 ปีที่แล้ว +1

    Do you have the dimensions saved that you can email them? Or do you sell more of these boxes already fabricated to fit 2 8in subs? Ill cut my floor out tomorrow, lol

    • @zachreece8410
      @zachreece8410 6 หลายเดือนก่อน +1

      Skar audio makes a box for it. I’m doing the job soon. This video showed me exactly what I need to do to get that useless storage out lol

  • @djmongi
    @djmongi 2 ปีที่แล้ว +1

    How can I order a box the same for my 2017 Ram

  • @DamianCastro-fk6qo
    @DamianCastro-fk6qo 20 วันที่ผ่านมา

    I need one of those for a 2014 dodge ram crewcab

  • @luciozavala5002
    @luciozavala5002 2 ปีที่แล้ว

    How much does a box like that coast I need one for my 04 dodge

  • @jonnathanparra3738
    @jonnathanparra3738 3 ปีที่แล้ว

    Where are y’all located I want a box done for some sundown on a ram 1500 quad cab 09-18

  • @dailygrinders89
    @dailygrinders89 ปีที่แล้ว

    Seat risers?

  • @Joel-ce4ih
    @Joel-ce4ih 3 ปีที่แล้ว

    I need one 10” for my 2021 Jeep gladiator how much?

  • @damienfaulkner2045
    @damienfaulkner2045 4 ปีที่แล้ว

    What’s is the cubic inch on that sub box? I have two scar EVL-10. They each need about 1.75 ~ 2.00 ft³ for ported

  • @keithzaczek1
    @keithzaczek1 4 ปีที่แล้ว +1

    So cool to see this built in only 4 minutes 😂. Looked great quick question what amplifier kits do you guys use? I always see that orange insulation but can't figure out the brand .

  • @2mouthbassin
    @2mouthbassin 3 ปีที่แล้ว

    How much air space are yall getting with that box?

  • @87gsarah
    @87gsarah 4 ปีที่แล้ว

    I need a box for a 2020 ram Laramie under the seat any recommendations ? Also what would you guys recommend for woffers

  • @miguel300ish
    @miguel300ish 2 ปีที่แล้ว

    Is this box removable ? Looks like you guys fiber glass right over the sheet metal

  • @miguel300ish
    @miguel300ish 2 ปีที่แล้ว

    Where you guys located ? I’m intrested in a box like this for my ram

    • @anthonyscaraudiolife6827
      @anthonyscaraudiolife6827  2 ปีที่แล้ว

      Anaheim 102 w la Palma Anaheim ca 92801

    • @stephentringale5865
      @stephentringale5865 2 ปีที่แล้ว

      Aw cool im right around the corner ..do I need an appointment? Plus do you have Rentals I got 2021 Raptor ..I want it to bruise my back.!

  • @eduardochannel2938
    @eduardochannel2938 3 ปีที่แล้ว

    I need that where are you located

  • @TristynRusselo
    @TristynRusselo 3 ปีที่แล้ว

    Why does nobody extend the boxes to the back wall?

    • @abelscaliber7969
      @abelscaliber7969 3 ปีที่แล้ว

      It’s not worth the hassle

    • @abelscaliber7969
      @abelscaliber7969 3 ปีที่แล้ว

      They way the seat folds down would be impeded

  • @jonathan_714
    @jonathan_714 4 ปีที่แล้ว

    Where are you guys located?

    • @anthonyscaraudiolife6827
      @anthonyscaraudiolife6827  4 ปีที่แล้ว +1

      5132 holt blvd Montclair ca

    • @jonathan_714
      @jonathan_714 4 ปีที่แล้ว

      Whats the price to build me a box like this on same exact truck?

  • @november750william8
    @november750william8 4 ปีที่แล้ว

    Nice box.

  • @ttv_sway9531
    @ttv_sway9531 3 ปีที่แล้ว

    Y’all should built some for a 2002 and newer and sell them on eBay and Amazon or your website

  • @albertnickson7866
    @albertnickson7866 2 ปีที่แล้ว

    Where are you located

  • @CollegeBoy1990
    @CollegeBoy1990 3 ปีที่แล้ว

    How much bc a shop around me ball parked me 5k to 10k to do that to my 2500, that was a ball park for them to cut out, make a box, and the subs and amps for said box.

  • @dantheisen35
    @dantheisen35 3 ปีที่แล้ว

    That’s what’s up sweet

  • @gerr35
    @gerr35 3 ปีที่แล้ว

    Can you make that same box for.me.
    2014 ram 4 door same truck I need one for 2 T5 soundstream 12's

    • @anthonyscaraudiolife6827
      @anthonyscaraudiolife6827  3 ปีที่แล้ว +1

      yes

    • @nateb90
      @nateb90 2 ปีที่แล้ว

      What would the price be for a box set up like this? I have a 2015 Ram 1500 crew cab. 2 12” Rockford Fosgate subs. Thanks in advance.

    • @tyronepeterson85
      @tyronepeterson85 ปีที่แล้ว

      ​@@anthonyscaraudiolife6827 hi I have a 2013 ram crew cab 1500 I'll try to get a box built how much will it cost

  • @mr.89irocz
    @mr.89irocz 4 ปีที่แล้ว

    How can you get more bass from Mexican music besides a sub or subs.

  • @DanielLeon-lb4yg
    @DanielLeon-lb4yg 4 ปีที่แล้ว

    Bro u should show of the music cuality.

    • @anthonyscaraudiolife6827
      @anthonyscaraudiolife6827  4 ปีที่แล้ว

      It hard cuz I don't have hi end mics on the cameras and cell phone have the worst speakers.

  • @jorgefranco8498
    @jorgefranco8498 4 ปีที่แล้ว +1

    All that work for some kicker gosh,lol

  • @percywing8533
    @percywing8533 3 ปีที่แล้ว +1

    lol that made no sense go all the way to the back wall im glad i dont use ur shop

  • @taberross3461
    @taberross3461 3 ปีที่แล้ว +1

    Love it....cut apart a 32,000 dollar truck for some....Airspace....that's stupid.....I would like to know the appraised value of that truck now....should have bought better subs....that require less air space....and RETAIN the value of the TRUCK...so dumb....newbies

    • @taberross3461
      @taberross3461 3 ปีที่แล้ว

      Could have used solobarics....totally screwed that truck up....hope you disclosed to the customer...his truck is worth a lot less now.

    • @Its.Ar0d
      @Its.Ar0d 2 ปีที่แล้ว

      Bro shut up it’s his truck he can do Wtf he wants. Quit crying on TH-cam